NE Road Trip - The 1947 - Present Chevrolet & GMC Truck Message Board Network

vtblazer · 03-16-2005, 07:33 AM

Doing another parts run over the last few days of March. 28th-30th.

Meeting up with another member coming from Maine, we'll be heading for VA.

The reason for this thread is this:
1) Asking if anybody along the way, would be willing to offer "emergency" numbers for us. Just incase.

The trip route begins in northern Maine, to VT.
Then down I-87, to I-88, to I-81 into VA.

Thanks.

**CPNE** · 03-16-2005, 08:32 AM

assuming the Me to VT rte is 302, you have mine.

JimKshortstep4x4 · 03-16-2005, 12:22 PM

I am probably out of the way so I won't offer an emergency number. Good luck on your trip, sounds like fun!

Jim

GMC AMI · 03-17-2005, 04:22 AM

Ttt

vtblazer · 03-17-2005, 08:11 AM

Bump back up, hoping for a couple more toward VA way.

Thanks Jeff, yep got yours.

Trifelynn · 03-17-2005, 10:28 AM

You definitely can have mine...and anything you guys might need.
I am in Maryland, about an hour and a half east of Hagerstown...
Will send to you kurt...

vtblazer · 03-18-2005, 09:04 PM

Back around for the weekend.

70 shorty · 03-18-2005, 10:06 PM

Where you headed in VA? I-81 is about 2 hours away at from me, so I may not be much help, but if your headed to central VA, let me know, I'll pm you mine. BTW, maybe you're heading there but you should stop in Front Royal and see Bill Athey, that's right on I-81

vtblazer · 03-18-2005, 11:11 PM

Quote:

Originally Posted by 70 shorty

you should stop in Front Royal and see Bill Athey

our destination.

Thanks for all the numbers so far!

**JIMs70GMC** · 03-18-2005, 10:12 PM

Have room for Mike's bed as I'll have it up there by the end of next week, probably on Saturday. Mike, it's off!

vtblazer · 03-20-2005, 08:39 AM

Quote:

Originally Posted by JIMs70GMC

Have room for Mike's bed as I'll have it up there by the end of next week, probably on Saturday. Mike, it's off!

Jim, thanks for getting the bed up to Bill's.

Too bad we won't get there until after your gone, would of be good to meet you. Thanks again.

Appreciate all the numbers guys.

GMC AMI · 03-22-2005, 07:43 AM

Quote:

Originally Posted by JIMs70GMC

Have room for Mike's bed as I'll have it up there by the end of next week, probably on Saturday. Mike, it's off!

Thanks for all your help Jim!

East End K5 · 03-22-2005, 08:27 AM

How about coming to LI? There are probably about 4 K5 Blazers on the whole LI....AND I NEED PARTS DAMMIT!

biglou55 · 03-22-2005, 11:04 AM

Kurt if you were coming down I-91 to I-95 you know i would help out.you have my #s if i can help in any way.

vtblazer · 03-22-2005, 02:22 PM

Quote:

Originally Posted by biglou55

Kurt if you were coming down I-91 to I-95 you know i would help out.you have my #s if i can help in any way.

I know you would, thanks Lou.
Will be heading south on 87.

dwaite72lnghrn · 03-18-2005, 10:17 PM

How far in VA you going? I will be heading south and west towards the end of the month.

70 shorty · 03-18-2005, 11:29 PM

That's what I figured given your route.

Pete

pickupman · 03-19-2005, 09:58 AM

hope you guys have a safe trip down. Looking forward to meeting you all.
Bill

DTerry · 03-19-2005, 10:42 AM

Here's the deal... I live in Binghamton NY (I88 and I81 intersection) and will be in Albany NY (I87 and I88 intersection) that week, but if you need help, call me. I probably won't be too much help in Albany, but I'll drive home (two hours) to help you if you need it.

Also, you could use my tools/shop if you need to. You can do pretty much anything in there. My boys will be around home if you just need something quick. I also have a car trailer at home if you really get into trouble...

I'll send you a PM with a phone number.

bagged91 · 03-22-2005, 02:33 PM

I would help too if you were coming through NJ down I-95, I-295 or the NJ Turnpike... but that doesn't do ya any good with your route but here's to a safe trip anyway!

L8R - Joe

Gordo · 03-22-2005, 07:59 PM

I'm 3 miles off of exit 63 or 62 on I 95 in CT. If you think you may pass thru this area I can PM you my home/work #s.

vtblazer · 03-22-2005, 10:29 PM

Quote:

Originally Posted by Gordo

I'm 3 miles off of exit 63 or 62 on I 95 in CT. If you think you may pass thru this area I can PM you my home/work #s.

Taking I-87 south through NY to I-88 west.
Appreciate the offer though, thanks.

GMC AMI · 03-23-2005, 10:38 AM

My # 207-895-3578

dwaite72lnghrn · 03-29-2005, 09:54 PM

Did anybody get an update on how they are progressing?

pickupman · 03-29-2005, 10:23 PM

Kurt, made it down yesterday and should be back home by now. It was very nice to meet kurt.

03-16-2005, 07:33 AM	#1
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	NE Road Trip Doing another parts run over the last few days of March. 28th-30th. Meeting up with another member coming from Maine, we'll be heading for VA. The reason for this thread is this: 1) Asking if anybody along the way, would be willing to offer "emergency" numbers for us. Just incase. The trip route begins in northern Maine, to VT. Then down I-87, to I-88, to I-81 into VA. Thanks.

03-16-2005, 08:32 AM	#2
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	assuming the Me to VT rte is 302, you have mine. __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

03-17-2005, 04:22 AM	#4
GMC AMI Registered User Join Date: Apr 2004 Location: The Other Maine! Posts: 2,236	Ttt __________________ 1968 Chevy 4x4 307 4 speed

03-17-2005, 10:28 AM	#6
Trifelynn Registered User Join Date: May 2004 Location: Williston, North Dakota Posts: 469	You definitely can have mine...and anything you guys might need. I am in Maryland, about an hour and a half east of Hagerstown... Will send to you kurt... __________________ Always looking for a 2wd blazer Last edited by Trifelynn; 03-17-2005 at 10:30 AM.

03-18-2005, 10:06 PM	#8
70 shorty Where's my beer? Join Date: Oct 2004 Location: Glen Allen, VA Posts: 1,772	Where you headed in VA? I-81 is about 2 hours away at from me, so I may not be much help, but if your headed to central VA, let me know, I'll pm you mine. BTW, maybe you're heading there but you should stop in Front Royal and see Bill Athey, that's right on I-81 __________________ 70 C10, shortstep, .30 over 250,Hurst shifted 3 spd parts hauler. Holley 390, Clifford Intake, Header, ported cylinder head, unknown bigger cam. 79 Corvette L82, 4 spd, black, red interior, headers, flowmasters, and unkown bigger cam. '03 Grand Cherokee Laredo, 4.0 4x4 daily driver. 165K miles, and runs great '08 Tahoe LTZ 4x4 155K

03-16-2005, 12:22 PM	#3
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	I am probably out of the way so I won't offer an emergency number. Good luck on your trip, sounds like fun! Jim

03-17-2005, 08:11 AM	#5
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Bump back up, hoping for a couple more toward VA way. Thanks Jeff, yep got yours.

03-18-2005, 09:04 PM	#7
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Back around for the weekend.

03-18-2005, 10:12 PM	#10
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Have room for Mike's bed as I'll have it up there by the end of next week, probably on Saturday. Mike, it's off! __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

03-22-2005, 08:27 AM	#13
East End K5 Registered User Join Date: Nov 2004 Location: Long Island NY Posts: 293	How about coming to LI? There are probably about 4 K5 Blazers on the whole LI....AND I NEED PARTS DAMMIT! __________________ I feel sorry for people who don't drink....because when they wake up in the morning, that's the best they're gonna feel all day long!---Frank Sinatra RIP [B]1972 Chevrolet K5 Blazer RIP 1986 GMC Sierra K3500 1TON, Long Box, V8350 RIP 1980 Chevy Silverado C30 Cab and Chassis, 454 TH400HD. RIP [B] 1995 Chevrolet Tahoe 2D [B]

03-22-2005, 11:04 AM	#14
biglou55 Senior Member Join Date: Sep 2002 Location: Greenfield Mass. Posts: 551	Kurt if you were coming down I-91 to I-95 you know i would help out.you have my #s if i can help in any way. __________________ Certifiably crazy person

03-18-2005, 10:17 PM	#16
dwaite72lnghrn Registered User Join Date: Jun 2002 Location: central pa Posts: 1,525	How far in VA you going? I will be heading south and west towards the end of the month. __________________ 72 longhorn c30 502BB/th400/fact air/4.11rear/ custom camper 72 bug(the better half's) under reconstruction 2009 HHR aqua blue 71 GMC k20 350/sm465 2009 Chevy hd3500 6.6 Victory Red crew cab dually Dave & Jeanne

03-18-2005, 11:29 PM	#17
70 shorty Where's my beer? Join Date: Oct 2004 Location: Glen Allen, VA Posts: 1,772	That's what I figured given your route. Pete __________________ 70 C10, shortstep, .30 over 250,Hurst shifted 3 spd parts hauler. Holley 390, Clifford Intake, Header, ported cylinder head, unknown bigger cam. 79 Corvette L82, 4 spd, black, red interior, headers, flowmasters, and unkown bigger cam. '03 Grand Cherokee Laredo, 4.0 4x4 daily driver. 165K miles, and runs great '08 Tahoe LTZ 4x4 155K

03-19-2005, 09:58 AM	#18
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,097	hope you guys have a safe trip down. Looking forward to meeting you all. Bill __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

03-19-2005, 10:42 AM	#19
DTerry '70 GMC C-25 LWB Join Date: Oct 2004 Location: Binghamton, N.Y. Posts: 273	Here's the deal... I live in Binghamton NY (I88 and I81 intersection) and will be in Albany NY (I87 and I88 intersection) that week, but if you need help, call me. I probably won't be too much help in Albany, but I'll drive home (two hours) to help you if you need it. Also, you could use my tools/shop if you need to. You can do pretty much anything in there. My boys will be around home if you just need something quick. I also have a car trailer at home if you really get into trouble... I'll send you a PM with a phone number. __________________ 1970 GMC C-25 LWB (middle of frame up) 5-7 drop with 3in drop spindles, flip kit with blocks and still keeping the 3/4 ton. Shaved drip rails and marker lights, rear roll pan, cowl induction hood. 1987 Camaro z28 350, vortec 305 heads. 10:1 comp, t5 trans. Street terrrorizer. 1988 Monte Carlo (Super Stock ashpalt race car) My Truck



Register or Log In To remove these advertisements.

03-22-2005, 02:33 PM	#20
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	I would help too if you were coming through NJ down I-95, I-295 or the NJ Turnpike... but that doesn't do ya any good with your route but here's to a safe trip anyway! L8R - Joe __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

03-22-2005, 07:59 PM	#21
Gordo Registered User Join Date: Jan 2001 Location: Killingworth, CT. USA Posts: 3,378	I'm 3 miles off of exit 63 or 62 on I 95 in CT. If you think you may pass thru this area I can PM you my home/work #s. __________________ 1971 C10 swb stepside 350/700R4/3.73posi (retired as of 4/22/03) 1998 S10 short bed 2002 S10 Blazer 1942 Oldsmobile 1958 Massey Harris Pony 1951 Wife Killingworth, Connecticut May those who love us, love us, any of those who do not love us, may God turn their hearts. And if God is unable to turn their hearts, may he turn their ankles so we may know them by their limping. A man who works with his hands is a laborer; a man who works with his hands and his brain is a craftsman; but a man who works with his hands and his brain and his heart is an artist.

03-23-2005, 10:38 AM	#23
GMC AMI Registered User Join Date: Apr 2004 Location: The Other Maine! Posts: 2,236	My # 207-895-3578 __________________ 1968 Chevy 4x4 307 4 speed

03-29-2005, 09:54 PM	#24
dwaite72lnghrn Registered User Join Date: Jun 2002 Location: central pa Posts: 1,525	Did anybody get an update on how they are progressing? __________________ 72 longhorn c30 502BB/th400/fact air/4.11rear/ custom camper 72 bug(the better half's) under reconstruction 2009 HHR aqua blue 71 GMC k20 350/sm465 2009 Chevy hd3500 6.6 Victory Red crew cab dually Dave & Jeanne

03-29-2005, 10:23 PM	#25
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,097	Kurt, made it down yesterday and should be back home by now. It was very nice to meet kurt. __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.