kick panel to kick panel measurment? 64-66 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

roj2323 · 03-22-2005, 08:59 PM

hey guy's i'm trying to plan a mod for my truck and i need the distance from the drivers side kick panel to the passenger side kick panel right under the dash. if you could help me out with this please let me know. i don't own a 64-66 so i can't just go measure mine. the short story is i want to put the 64-66 dash in my 71.

thanks,
ondrew

zenish · 03-22-2005, 10:36 PM

be aware that the 60-66 dashes are well spot welded in at the front.

roj2323 · 03-22-2005, 10:46 PM

yea i figured it's spot welded in the window lip. got a measurment? please please please

zenish · 03-23-2005, 10:40 PM

63.75"

roj2323 · 03-24-2005, 12:19 AM

thank you, thank you, thank you, thank you, thank you, thank you, thank you,

ondrew

Woogeroo · 03-24-2005, 05:57 AM

I was told once it's something like 20-30 somethign odd spot welds holding it on... the '64-66 dash that is...

-W

roj2323 · 03-24-2005, 09:21 AM

i would assume that it's real simular to the 67-72 which is held on by the 20-30 spot welds and 4 bolts that go into the upper kickpanel areas.

ondrew
p.s. if they are interchangable i will deffinitly let you all know .

03-22-2005, 08:59 PM	#1
roj2323 Senior Member Join Date: Mar 2004 Location: Somewhere Posts: 985	kick panel to kick panel measurment? 64-66 hey guy's i'm trying to plan a mod for my truck and i need the distance from the drivers side kick panel to the passenger side kick panel right under the dash. if you could help me out with this please let me know. i don't own a 64-66 so i can't just go measure mine. the short story is i want to put the 64-66 dash in my 71. thanks, ondrew

03-22-2005, 10:36 PM	#2
zenish Registered User Join Date: Aug 2003 Location: stallings,nc Posts: 401	be aware that the 60-66 dashes are well spot welded in at the front. __________________ 1964 c10 short step 1962 econoline van 1989 rs camaro 2006 yamaha vino 125 1975 goldwing

03-23-2005, 10:40 PM	#4
zenish Registered User Join Date: Aug 2003 Location: stallings,nc Posts: 401	63.75" __________________ 1964 c10 short step 1962 econoline van 1989 rs camaro 2006 yamaha vino 125 1975 goldwing

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

03-22-2005, 10:46 PM	#3
roj2323 Senior Member Join Date: Mar 2004 Location: Somewhere Posts: 985	yea i figured it's spot welded in the window lip. got a measurment? please please please

03-24-2005, 12:19 AM	#5
roj2323 Senior Member Join Date: Mar 2004 Location: Somewhere Posts: 985	thank you, thank you, thank you, thank you, thank you, thank you, thank you, ondrew

03-24-2005, 05:57 AM	#6
Woogeroo Registered User Join Date: Aug 2003 Location: tool box Posts: 3,115	I was told once it's something like 20-30 somethign odd spot welds holding it on... the '64-66 dash that is... -W

03-24-2005, 09:21 AM	#7
roj2323 Senior Member Join Date: Mar 2004 Location: Somewhere Posts: 985	i would assume that it's real simular to the 67-72 which is held on by the 20-30 spot welds and 4 bolts that go into the upper kickpanel areas. ondrew p.s. if they are interchangable i will deffinitly let you all know .



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.