Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
03-23-2005, 11:17 AM | #1 |
Registered User
Join Date: Mar 2005
Location: Missouri
Posts: 16
|
looking for rear end in mo.
Looking to change gears in 10 bolt 8 lug Rear End. I believe its a 5:11 or 5:14 Im in Bolivar near Springfield Mo...
Last edited by chuck call; 03-23-2005 at 07:51 PM. Reason: More Info |
03-23-2005, 02:38 PM | #2 |
Senior Member
Join Date: Apr 2001
Location: Amazonia, Mo. USA
Posts: 2,821
|
What to what? would you take a 14FF or corporate? Location helps too. Give as much info as you can. It helps alot.
__________________
72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide |
03-23-2005, 02:53 PM | #3 |
72 C30 Trailer Queen
Join Date: Dec 1999
Location: SE MN, USA
Posts: 794
|
I have a complete Dana 60, 4.10 gears and posi, 2wd leaf spring.
$300. Where in MO are you? I could probably get it to Independence for some gas money. PM if interested. Chris |
03-23-2005, 07:57 PM | #4 | |
Registered User
Join Date: Mar 2005
Location: Missouri
Posts: 16
|
Quote:
Spfld, Mo. |
|
03-23-2005, 07:53 PM | #5 | |
Registered User
Join Date: Mar 2005
Location: Missouri
Posts: 16
|
Quote:
|
|
03-23-2005, 07:37 PM | #6 |
Registered User
Join Date: Mar 2005
Location: Missouri
Posts: 16
|
I just bought a 1972 3/4 ton truck nice but at about 55 mph Im at red line I think the rear end is about a 5 something im not sure im trying to find out the difference between a eaton rear end and I believe is a ho52 it is 10 bolt 8 lug ive seen acouple of pictures but am not for sure, I want to gear it for more highway speeds is there any thing else i can switch to without much work also have some parts that i have aquired with the truck, wing glass with frame, passenger side fender, door glass,window regulators, hood but has dint on front not bad but could probobly be fixed springfield mo.
|
03-23-2005, 07:56 PM | #7 |
user # 2756
Join Date: Jun 2001
Location: Chesapeake, Virginia
Posts: 4,612
|
Well if it has a round removable cover and drop out center section, then it is a corperate axle, also refered to as the eaton. 4.10 is the best you can shoot for. It was replaced in1973 by the 14 bolt full floater.
__________________
1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm |
03-23-2005, 08:01 PM | #8 | |
Registered User
Join Date: Mar 2005
Location: Missouri
Posts: 16
|
Quote:
|
|
03-23-2005, 08:12 PM | #9 |
user # 2756
Join Date: Jun 2001
Location: Chesapeake, Virginia
Posts: 4,612
|
yep, and yes a dana 60 will replace it. I have a dana60 in my 70 and the eaton in my 71, both 3/4 tons. Do you need leafs rear or coil springs and 2wd or 4wd? The leaf springs spacing is different between 2wd and 4wd, 42" v. 40". The one ton rears are also 40". For a 14bolt full floater from a 73 and up, look for a 1 ton rear as the spring spacing is 40.5' or a 3/4 ton version wich will be 42.5".
__________________
1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm |
03-23-2005, 08:28 PM | #10 | |
Registered User
Join Date: Mar 2005
Location: Missouri
Posts: 16
|
Quote:
|
|
03-23-2005, 08:34 PM | #11 | |
Registered User
Join Date: Mar 2005
Location: Missouri
Posts: 16
|
Quote:
|
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|