![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Shortbox wanna-be.
Join Date: Mar 2002
Location: Fort St.John, British Columbia, Canada
Posts: 773
|
Front A-Arm Mounting Stud Question
I posted this in XXL's crossmember post.
What did you guys come up with on the upper A arm mounting studs? I know that the upper arms on the '80+ trucks had a beveled washer that fit into the inside of the upper a arm. But something I noticed, where the a arm mounting stud comes through the frame it has a washer that is beveled outward. A flat shim couldn't sit flat against something like this? The '80+ trucks have a flat spacer that is agains the frame. Now I can see how this would work properly as it is a flat surface for the shims to sit against. Did the early trucks have 1 more piece that sat against the beveled spacer against the frame?
__________________
1970 Chevy C20 Custom Camper 402BB Turbo 400 trans. (Slowly becoming a '70 shortbox 1/2 ton) '71 Camaro SS 402/T400 resto '97 Z28 (11.41@127MPH) ![]() Last edited by REPO1; 03-28-2005 at 08:21 PM. |
![]() |
![]() |
![]() |
#2 |
Shortbox wanna-be.
Join Date: Mar 2002
Location: Fort St.John, British Columbia, Canada
Posts: 773
|
Anyone?
|
![]() |
![]() |
![]() |
#3 |
Shortbox wanna-be.
Join Date: Mar 2002
Location: Fort St.John, British Columbia, Canada
Posts: 773
|
Someone have any ideas on this?
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jun 2001
Location: Austin, Texas
Posts: 796
|
Not totally sure what you asking but the beveled washer are for stacking. So the outer most one will have the flat and be concave on the inside to match the beveled one closes in. This is so you dont have to use as many shims. Only need if you have taller springs. If you used lowering springs go with the one flat on both sides washer.
__________________
69 SWB C/10 5-6 drop 700R4 69 Firebird Convert 455 4 spd 70 Torino GT Convert Austin-Texas |
![]() |
![]() |
![]() |
#5 | |
Shortbox wanna-be.
Join Date: Mar 2002
Location: Fort St.John, British Columbia, Canada
Posts: 773
|
Quote:
I'm a little confused by what you said. The washer shown is pressed onto the mounting stud so It is there permanently. The old trucks have a rounded washer that I cannot understand. How would a flat shim sit against a rounded washer? The newer trucks now use a flat washer pressed onto the stud. That way the shims can sit up against it properly. What am I missing?
__________________
1970 Chevy C20 Custom Camper 402BB Turbo 400 trans. (Slowly becoming a '70 shortbox 1/2 ton) '71 Camaro SS 402/T400 resto '97 Z28 (11.41@127MPH) ![]() |
|
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jun 2001
Location: Austin, Texas
Posts: 796
|
You have to find the matching washer that is flat on one side and concave on the other. The flat would go towards the a arm side. So you will have 2 washer on each stud
__________________
69 SWB C/10 5-6 drop 700R4 69 Firebird Convert 455 4 spd 70 Torino GT Convert Austin-Texas |
![]() |
![]() |
![]() |
#7 | |
Shortbox wanna-be.
Join Date: Mar 2002
Location: Fort St.John, British Columbia, Canada
Posts: 773
|
Quote:
__________________
1970 Chevy C20 Custom Camper 402BB Turbo 400 trans. (Slowly becoming a '70 shortbox 1/2 ton) '71 Camaro SS 402/T400 resto '97 Z28 (11.41@127MPH) ![]() |
|
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Jun 2001
Location: Austin, Texas
Posts: 796
|
Then get a convex.
__________________
69 SWB C/10 5-6 drop 700R4 69 Firebird Convert 455 4 spd 70 Torino GT Convert Austin-Texas |
![]() |
![]() |
![]() |
#9 |
Shortbox wanna-be.
Join Date: Mar 2002
Location: Fort St.John, British Columbia, Canada
Posts: 773
|
That is what I was wondering. Where does a person find these? Do they even exist?
|
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Apr 2004
Location: Boiling Springs, PA
Posts: 435
|
They do exist, I just bought an A-arm used from another board member.
He sent me the studs with it, and it has 4 spacers total. 2 concave outward, like shown in your pic. + 2 concave inward that when put together then you have a flat surface for the shims to set on. I don't think my truck originally had the second spacer on there, if it did I don't remember. I think the shims were stacked against the concave outward one. Not a good idea I don't think. When I put it back together, I'll use both spacers and shim against the flat. I looked thru a couple vendor catalogs and don't see the spacers sold anywhere?
__________________
71 C10 long bed, 2003 6.0L, 06GTO E40, T56, 12bolt 4.10 rear |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|