|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
04-02-2005, 09:22 AM
|
#1 |
|
Registered User
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 400
|
72 chevy 350 power steering brackets info needed and pics please
HI All!
I have a 1972 Chevy Stepside short bed, 350, Auto. and I am putting Power steering on, I have most everything except 1 or 2 brackets that mount the pump on the engine. I have the short waterpump(I believe) and think I need the cast style bracket. can anyone shed some light on this. I would like to get some pics also of the brackets/Pumpo on the motor, mine has the Altenator and pump on the drivers side if that helps. Pics below at link for pump I have. Thanks Jeff Smith Pensacola, FL http://www.mvpc.com/1972chevy.htm 850-475-5030 |
|
|
|
04-02-2005, 09:51 AM
|
#2 |
|
Out draggin'
Join Date: Jan 2004
Location: Pitman,NJ
Posts: 1,574
|
Hi Jeff & welcome to the board from NJ! If the rain slows down a little bit here, I will go out and snap some pics off of my 72' Burb for you. That stepper looks pretty nice. Was it a fire dept. truck since new??
L8R - Joe
__________________
91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project" |
|
|
|
|
04-02-2005, 11:09 AM
|
#3 | |||
|
Union Electrician
Join Date: Feb 2005
Location: Louisville, Ky.
Posts: 3,354
|
I clicked and seen the pics nice truck!!! I also read the ad and I didn't need a double groove for the water pump as my power steering pump runs off the crank pulley,that is the only two (crank and ps pump) on that belt. Randy
__________________
 69 Custom-10 SWB FLEETSIDE  350/350 TH Dropped 3.5/5.5"Help support the board->HERE Board vendors -> Vendors list Zip:40272 Big Sandy Survivor... Quote:
Quote:
Quote:
|
|||
|
|
|
|
04-02-2005, 09:12 PM
|
#4 |
|
Senior Member
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
|
Here is a pic out of the assembly manual that show the details of the brackets for the power steering pump.
Jim |
|
|
|
|
04-04-2005, 07:53 AM
|
#5 |
|
Registered User
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 400
|
WOW Great, That has to be the one I need, I will start looking for those 2 in the pic. I have the manual also and that pic. When I bought the pump with brackets of EBAY, they said it was of a small block 1972 truck and it ndid not look like the pic in manual, the pump looks different also. so who knows, thanks and anymore pics would be great!!!
Jeff |
|
|
|
|
04-04-2005, 07:58 AM
|
#6 |
|
Registered User
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 400
|
The truck is an Army Base truck out of MO or NE. the went to a Fire Dept in MO. has 35K orig Miles, I am adding A/C and Power Steering
The Color is Od(Olive Drab) on the inside and the fire Dept painted red on the outside when they got it. it will go back to OD Thanks Jeff |
|
|
|
|
04-04-2005, 11:54 AM
|
#7 |
|
Registered User
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 400
|
also does the Alt mount right above the power steering pump on drivers side for 72 350?
I have seen a couple of different pics. also I have 2 different crankshaft 3 groove pulleys, do I need the 1 with all 3 grooves same size or the 1 with 2 same size and 1 larger size??? sorry for so many ??? but I am new and still in the learning curve. any pics appreciated of orig setup for 72 with AC/PS 350. with ALT and PS on drivers side Jeff Pensacola, FL |
|
|
|
|
04-04-2005, 01:01 PM
|
#8 | |
|
Registered User
Join Date: Jul 2001
Location: North Louisiana
Posts: 4,501
|
Quote:
 Yes, the alt. mounts above the PS pump on the driver's side for all 67-72s. The brackets/pump that you have pictured are for a later, long style water pump. Here are some pics of some brackets that I have. I have seen three different styles for 67-72's, though they all appear to be interchangeable in my opinion. The brackets/pump on the left came off of a '70, and the ones on the right came from a '69. I had a set from a '72, and they were slightly different, but very similar to the ones on the left. There are differences in the pullies between 67-72, but I can't help you much there. I believe that the '72 pump pulley is single groove, but inset more than these 2. I will sell one of these sets if you are interested. I'm also including a pic of my brother in law's truck. It was originally an Army truck also with a 250/6, 3spd, 4:11 posi rear, no air, no PS, 16" wheels, and no radio. We have since added an auto trans & PS to it, and repainted it olive drab(or pretty close, anyway).
__________________
Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com Last edited by HuggerCST; 04-04-2005 at 01:05 PM. |
|
|
|
|
|
04-04-2005, 02:03 PM
|
#9 |
|
Registered User
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 400
|
AWESOME!!!
The one on the right looks like what I need for the 72, I much for the complete assy on the right with the pump & shipping? do you use paypal? Were there any numbers/letters on the Army truck doors you have in the pic? Jeff Smith 3519 Gatewood Dr Pensacola, FL 32514 850-475-5030 |
|
|
|
|
04-04-2005, 02:33 PM
|
#10 | |
|
Registered User
Join Date: Jul 2001
Location: North Louisiana
Posts: 4,501
|
Quote:
__________________
Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com |
|
|
|
|
|
04-04-2005, 02:25 PM
|
#11 |
|
Keep On Truckin'
Join Date: Mar 2003
Location: Buda, Texas
Posts: 1,354
|
If Hugger CST doesn't want to sell his setup let me know. I've got mine off a '72 C-10 with a rebuilt pump and the brackets bead blasted and painted black. I ended up going with a serpentine setup off a '92 Camaro and don't need it anymore.
__________________
Just Passin' Thru Some projects are like herding cats; others are like putting out fires; this one was like herding cats on fire..... Last edited by mocwon; 04-04-2005 at 02:26 PM. |
|
|
|
|
04-04-2005, 03:38 PM
|
#12 | |
|
Registered User
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 400
|
Power steering
Quote:
email pic if possible please Thanks!!! Jeff Smith 3519 Gatewood Drive Pensacola, FL 32514 850-475-5030 |
|
|
|
|
|
04-04-2005, 03:49 PM
|
#13 |
|
Registered User
 
Join Date: Apr 2000
Location: Bradenton, FL
Posts: 1,036
|
When you put the pump bracket on and go to bolt it to the bolt on the motor mount it will make your life a lot easyer if you make the bracket hole a slot so you just have to loosen the bolt and slide it on.
__________________
1970 CST/10 402,700R4,3:73 posi,AC,PS,PB,TLT,PW,Buckets with heaters |
|
|
|
|
04-04-2005, 04:10 PM
|
#14 |
|
Join Date: Dec 1999
Location: Eastern - Manitoba Canada, Winnipeg
Posts: 4,369
|
Here's a pic someone posted of the pump difference,.. I can't remember which is which. Maybe someone knows them and I can update my reference.
__________________
Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife. |
|
|
|
|
04-06-2005, 08:37 AM
|
#15 | |
|
Keep On Truckin'
Join Date: Mar 2003
Location: Buda, Texas
Posts: 1,354
|
Here's are the pictures, I sent you a PM on price information.
Quote:
__________________
Just Passin' Thru Some projects are like herding cats; others are like putting out fires; this one was like herding cats on fire..... |
|
|
|
|
|
04-06-2005, 03:52 PM
|
#16 |
|
Registered User
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 400
|
Power Steering Pump with brackets
I sent you a PM mocwon
Jeff |
|
|
|
|
10-02-2016, 07:48 PM
|
#17 |
|
Scrapper 1
Join Date: Jan 2007
Location: Riverside Calif
Posts: 1,649
|
Re: 72 chevy 350 power steering brackets info needed and pics please
Looking for the 1972 pump braket that is shown in this pictures on here there are4 3 pic showing the front side and back view I'm looking for 2 each of them meaning 4 brackets
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
