GRRR! 40" gumbo mudders - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GMC71k20 · 04-08-2005, 11:55 PM

the tires are junk...but the rims are wide and good. looks pretty mean

GMC71k20 · 04-08-2005, 11:56 PM

GMC71k20 · 04-09-2005, 12:19 AM

oh ya, they were free. got them from a friend whos got two mint 3/4 4x4s...a 71 gmc and a 70 chev that was just frame-off'd.

Mudder · 04-09-2005, 03:32 AM

Side view?????

*1FaastC10* · 04-09-2005, 05:08 AM

i believe the gumbos have enough meat to be regrooved. might want to look into that.

GMC71k20 · 04-09-2005, 12:22 PM

the rubber is pretty hard. =( it was tough to take pictures because its in our crammed garage. theres stilll 33s on the back in this picture

*1FaastC10* · 04-09-2005, 09:46 PM

Quote:

Originally Posted by GMC71k20

the rubber is pretty hard. =(

that's why grooving irons get hot... hot rubber is soft rubber.

77gmcjoe · 04-09-2005, 09:49 PM

Sweet truck!

GMC71k20 · 04-09-2005, 12:22 PM

GMC71k20 · 04-09-2005, 11:37 PM

1faastc10, im gonna look into that. is it usually expensive???

*1FaastC10* · 04-10-2005, 02:54 AM

cant be that expensive, all it is is an overgrown soldering iron with a blade on it.

Hoods69BadBowTie · 04-10-2005, 03:41 AM

That looks pretty mean with those tires on it!! Nice looking truck too.
-Later

meathead95 · 04-10-2005, 10:07 AM

back it out. lets get a good shot.

Mudder · 04-10-2005, 10:34 AM

I think I would try to find some tires before i cut em and ran them on the road. I'm not so sure you'd be able to balance them out after cutting. Lots of guys over at CTS sell larger tires. Or maybe even pavement sucks.

GMC71k20 · 04-10-2005, 04:43 PM

cant back it out just yet...in the middle of the blazer tank swap =(

1969 GMC · 04-10-2005, 06:26 PM

Quote:

Originally Posted by GMC71k20

cant back it out just yet...in the middle of the blazer tank swap =(

man I am jealous Bob. I havent done much but putz around, but then again you do have a garage you lucky bastid.

looks great, keep the updates coming. if you were a little closer I know where there is a set of 4x 44" ground hawgs on 15" steelies for like $100, but the tread is almost bald. oh well...

GMC71k20 · 04-10-2005, 07:19 PM

iin about another 3 weeks i should have another update. it will be on 16.5 m/t classic 2's with 35" bfg all-terrains.
get your truck set up fast, thatll be awesome

04-08-2005, 11:55 PM	#1
GMC71k20 Registered User Join Date: Aug 2002 Location: mass Posts: 1,277	GRRR! 40" gumbo mudders the tires are junk...but the rims are wide and good. looks pretty mean

04-08-2005, 11:56 PM	#2
GMC71k20 Registered User Join Date: Aug 2002 Location: mass Posts: 1,277	Last edited by GMC71k20; 04-08-2005 at 11:58 PM.

04-09-2005, 09:49 PM	#8
77gmcjoe What do we get for $10? Join Date: Oct 2004 Location: Beardstown, Illinois Posts: 340	Sweet truck! __________________ 1977 GMC K25 400/400/205 1989 Chevy Suburban R1500 350/700R4 (work beater) 1994 Chevy K3500 dually 454/4L80 1996 Corvette LT4 350/ZF 6 speed 2000 Bonneville SSEI Supercharged 3.8 Liter V6 1966 Chevelle 2 door sedan (Needs major repair )

04-10-2005, 03:41 AM	#12
Hoods69BadBowTie Chevys Kick A$$ Join Date: Jan 2005 Location: Zootown, MT Posts: 12,699	That looks pretty mean with those tires on it!! Nice looking truck too. -Later __________________ HOODS is what I answer too -'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold -'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit -'86 K5 Blazer Silverado 6.2 4" lift 35"s -'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's -'83 Monte Carlo T-Tops. 126,500 Original Miles -LATER I would rather push a Chevy then drive a ford!!

04-10-2005, 10:07 AM	#13
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	back it out. lets get a good shot. __________________ 72 2wd blazer 72 swb 4x4

04-09-2005, 12:19 AM	#3
GMC71k20 Registered User Join Date: Aug 2002 Location: mass Posts: 1,277	oh ya, they were free. got them from a friend whos got two mint 3/4 4x4s...a 71 gmc and a 70 chev that was just frame-off'd.

04-09-2005, 03:32 AM	#4
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Side view?????

04-09-2005, 05:08 AM	#5
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	i believe the gumbos have enough meat to be regrooved. might want to look into that.

04-09-2005, 12:22 PM	#6
GMC71k20 Registered User Join Date: Aug 2002 Location: mass Posts: 1,277	the rubber is pretty hard. =( it was tough to take pictures because its in our crammed garage. theres stilll 33s on the back in this picture

04-09-2005, 11:37 PM	#10
GMC71k20 Registered User Join Date: Aug 2002 Location: mass Posts: 1,277	1faastc10, im gonna look into that. is it usually expensive???

04-10-2005, 02:54 AM	#11
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	cant be that expensive, all it is is an overgrown soldering iron with a blade on it.

04-10-2005, 10:34 AM	#14
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	I think I would try to find some tires before i cut em and ran them on the road. I'm not so sure you'd be able to balance them out after cutting. Lots of guys over at CTS sell larger tires. Or maybe even pavement sucks.

04-10-2005, 04:43 PM	#15
GMC71k20 Registered User Join Date: Aug 2002 Location: mass Posts: 1,277	cant back it out just yet...in the middle of the blazer tank swap =(

04-10-2005, 07:19 PM	#17
GMC71k20 Registered User Join Date: Aug 2002 Location: mass Posts: 1,277	iin about another 3 weeks i should have another update. it will be on 16.5 m/t classic 2's with 35" bfg all-terrains. get your truck set up fast, thatll be awesome

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.