|
04-20-2005, 05:20 PM | #1 |
Registered User
Join Date: Jan 2001
Location: Sabinal, Texas
Posts: 1,706
|
Cab Mounts Question
I can't remember so please help an ol' boy here. Are C-10 cab mounts different from C-20 & 30's? I kinda remember this being said. Heres the dilemma. I have a set of Energy Suspension cab mounts (#3.4108G) that is for C10's The number for c-20's and 30's is different. Can these I have right now be used on a 3/4 ton cab?
Thanx Last edited by 69sixpackbee; 04-20-2005 at 05:31 PM. |
04-20-2005, 06:10 PM | #2 |
Account Suspended
Join Date: Sep 2000
Posts: 3,991
|
Yup they are different. IIRC the rubber that the cab sits on is the same but the rubber under the mount is bigger, I could be wrong on this though, it has been a few years since I replaced mine. You can buy the rubbers at your local GM dealer.
|
04-21-2005, 12:17 AM | #3 |
Registered User
Join Date: Aug 2001
Location: rock island,il,usa
Posts: 5,382
|
If memory is working, the 3/4 ton 2wd's, & the 4wd trucks had a taller cushion at the rear of the cab......swap the rear frame brackets, & you should be able to use the 1/2ton pcs for mounts(someone chime in if im off on this).....69L
__________________
http://community.webshots.com/user/hotrodhorn |
04-24-2005, 05:46 PM | #4 |
Registered User
Join Date: Aug 2003
Location: Meyersdale, PA
Posts: 144
|
yes the 1/2 and the 3/4 ton are different. the 3/4 ton rear mounts rubber bushings are about 2 inches taller. this is because the 3/4 ton frame rear cab mount brackets are lower on the frame. the front are the same.
__________________
jim gallagher |
04-25-2005, 11:12 AM | #5 |
Registered User
Join Date: Jan 2001
Location: Sabinal, Texas
Posts: 1,706
|
But are'nt the taller bushings UNDER the mount?
|
04-25-2005, 06:51 PM | #6 | |
Registered User
Join Date: Aug 2001
Location: rock island,il,usa
Posts: 5,382
|
Quote:
__________________
http://community.webshots.com/user/hotrodhorn |
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|