FS, Parting out 68-72 Short Stepside Bed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Inspector722 · 04-22-2005, 03:39 PM

All prices do not include shipping.
1. Four of the crossbars. Three of them are the ones you bolt thru to mount the bed on the frame. Lite surface rust. $40 obo
2. Driver and passenger front steps on the bed. One small ding on pass step. Only a small amount of surface rust. $50 for both obo
3.Front panel has a couple small dings and a small amount of surface rust, three small pin holes(one bottom,two top). $30 obo
4. Driver side stepside panel. Lite surface rust, no holes. The angel piece that runs down the inside needs replaced. The side is straight, but it needs a little work to fix a couple small dents. $60 obo
5. Passenger side nice and straight, with very few small dings on top. No rust holes. $100 obo.
6. Step supports $25 obo

Inspector722 · 04-22-2005, 03:50 PM

More Pics

RicksTrucks · 04-22-2005, 04:34 PM

Looks like you are showing pics of two different passenger fenders, instead of one of each.
I am looking for a passenger side panel and a good front panel with no holes, can you email me some pics? rlcrockett@aol.com
And if you don't get any other offers, I will take the lites for $30 plus shipping.

Inspector722 · 04-22-2005, 05:50 PM

Thanks, I fixed the pic. I accidently flipped it. When I took new pics of the front panel I found three small pin holes. Two is at the top, one at the bottom. Sorry updated price for new info.

git-r-stuck · 04-22-2005, 08:07 PM

Do you still have the steps and finders? How much for shipping to S.C.
Thanks Scott

cowboy33713 · 04-24-2005, 12:26 PM

Howdy- do you have the Emergency brake stuff ? Was talking to another fellow here who had a 68 he was parting out, but he seems to have vaporized after quoting me a price more than a week ago. Thanks!
cowboy33713

Inspector722 · 04-24-2005, 03:40 PM

I only have the bed to part out, not the whole truck. Sorry.

shadow20 · 04-24-2005, 05:50 PM

Is it possible to ship the bed sides and bed floor strips? If so, how much to 40065.

Inspector722 · 04-24-2005, 08:57 PM

I don't have any bed floor strips, what I have are the crossbars that go underneath. $160 is for the parts, as for shipping I would have no idea. The sides are to large for the shipping company I use. The only option I mite have is that is a family trip to DC the first of July.

dallas71 · 04-29-2005, 04:55 PM

do you still have the tailgate and the rear lite assy??? If so I will take them.....How much on the rear lites???

RicksTrucks · 04-29-2005, 06:26 PM

I bought the lites.

dallas71 · 04-30-2005, 08:45 AM

I'll take the tailgate...when are you going to pate????

Inspector722 · 04-30-2005, 11:50 AM

I will not be making it to Pate this year. Man, I wish I was. Found out Thursday that one of my best friends brother passed away, and the funeral is today.

Inspector722 · 05-03-2005, 03:06 PM

Updated info and canship this stuff by Greyhound. Just shipped the step fenders.
PM sent

dallas71 · 05-03-2005, 03:10 PM

how much to ship the tailgate????? 76210

Inspector722 · 05-03-2005, 10:56 PM

Tailgate and rear cross sill sold.

Inspector722 · 05-11-2005, 12:09 PM

Just the sides, some cross bars and steps left. Will bring this and a few other parts to the May 28th meet.

shadow20 · 04-28-2005, 09:19 PM

When and where is the Pate Meet? Any chance you can hold until July? I don't get my vacation until then.

Eric

04-22-2005, 03:39 PM	#1
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	FS, Parting out 68-72 Short Stepside Bed All prices do not include shipping. 1. Four of the crossbars. Three of them are the ones you bolt thru to mount the bed on the frame. Lite surface rust. $40 obo 2. Driver and passenger front steps on the bed. One small ding on pass step. Only a small amount of surface rust. $50 for both obo 3.Front panel has a couple small dings and a small amount of surface rust, three small pin holes(one bottom,two top). $30 obo 4. Driver side stepside panel. Lite surface rust, no holes. The angel piece that runs down the inside needs replaced. The side is straight, but it needs a little work to fix a couple small dents. $60 obo 5. Passenger side nice and straight, with very few small dings on top. No rust holes. $100 obo. 6. Step supports $25 obo Attached Images __________________ Email address- inspector722@aol.com Zip Code- 77611 Shipping- DHL & USPS Working on: 67, large back glass, 307 V8, 200 4R, 3.73 rearend, Short Stepside Bed Last edited by Inspector722; 05-11-2005 at 12:08 PM. Reason: Update

04-22-2005, 03:50 PM	#2
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	More Pics More Pics Attached Images __________________ Email address- inspector722@aol.com Zip Code- 77611 Shipping- DHL & USPS Working on: 67, large back glass, 307 V8, 200 4R, 3.73 rearend, Short Stepside Bed Last edited by Inspector722; 05-11-2005 at 12:05 PM.

04-22-2005, 04:34 PM	#3
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,639	Looks like you are showing pics of two different passenger fenders, instead of one of each. I am looking for a passenger side panel and a good front panel with no holes, can you email me some pics? rlcrockett@aol.com And if you don't get any other offers, I will take the lites for $30 plus shipping. __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

04-22-2005, 05:50 PM	#4
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	Thanks, I fixed the pic. I accidently flipped it. When I took new pics of the front panel I found three small pin holes. Two is at the top, one at the bottom. Sorry updated price for new info. __________________ Email address- inspector722@aol.com Zip Code- 77611 Shipping- DHL & USPS Working on: 67, large back glass, 307 V8, 200 4R, 3.73 rearend, Short Stepside Bed Last edited by Inspector722; 04-22-2005 at 06:40 PM.

04-24-2005, 03:40 PM	#7
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	I only have the bed to part out, not the whole truck. Sorry. __________________ Email address- inspector722@aol.com Zip Code- 77611 Shipping- DHL & USPS Working on: 67, large back glass, 307 V8, 200 4R, 3.73 rearend, Short Stepside Bed

04-22-2005, 08:07 PM	#5
git-r-stuck Registered User Join Date: Mar 2005 Posts: 29	Do you still have the steps and finders? How much for shipping to S.C. Thanks Scott

04-24-2005, 12:26 PM	#6
cowboy33713 Senior Member Join Date: Apr 2005 Location: metro Phoenix, AZ Posts: 241	Howdy- do you have the Emergency brake stuff ? Was talking to another fellow here who had a 68 he was parting out, but he seems to have vaporized after quoting me a price more than a week ago. Thanks! cowboy33713

04-24-2005, 05:50 PM	#8
shadow20 Registered User Join Date: Apr 2005 Location: SC Posts: 14	Bed Parts Is it possible to ship the bed sides and bed floor strips? If so, how much to 40065. __________________ Eric 1966 Chevy C20, Long Bed, Fleetside 1967 Chevy C10, Short Bed, Stepside

04-24-2005, 08:57 PM	#9
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	I don't have any bed floor strips, what I have are the crossbars that go underneath. $160 is for the parts, as for shipping I would have no idea. The sides are to large for the shipping company I use. The only option I mite have is that is a family trip to DC the first of July. __________________ Email address- inspector722@aol.com Zip Code- 77611 Shipping- DHL & USPS Working on: 67, large back glass, 307 V8, 200 4R, 3.73 rearend, Short Stepside Bed

04-29-2005, 04:55 PM	#10
dallas71 Registered User Join Date: Mar 2004 Location: Corinth,TX Posts: 444	do you still have the tailgate and the rear lite assy??? If so I will take them.....How much on the rear lites??? __________________ My 1966 LWB Truck My 1966 SWB Truck

04-29-2005, 06:26 PM	#11
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,639	I bought the lites. __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

04-30-2005, 08:45 AM	#12
dallas71 Registered User Join Date: Mar 2004 Location: Corinth,TX Posts: 444	I'll take the tailgate...when are you going to pate???? __________________ My 1966 LWB Truck My 1966 SWB Truck

04-30-2005, 11:50 AM	#13
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	I will not be making it to Pate this year. Man, I wish I was. Found out Thursday that one of my best friends brother passed away, and the funeral is today. __________________ Email address- inspector722@aol.com Zip Code- 77611 Shipping- DHL & USPS Working on: 67, large back glass, 307 V8, 200 4R, 3.73 rearend, Short Stepside Bed

05-03-2005, 03:06 PM	#14
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	Updated info and canship this stuff by Greyhound. Just shipped the step fenders. PM sent __________________ Email address- inspector722@aol.com Zip Code- 77611 Shipping- DHL & USPS Working on: 67, large back glass, 307 V8, 200 4R, 3.73 rearend, Short Stepside Bed

05-03-2005, 03:10 PM	#15
dallas71 Registered User Join Date: Mar 2004 Location: Corinth,TX Posts: 444	how much to ship the tailgate????? 76210 __________________ My 1966 LWB Truck My 1966 SWB Truck



Register or Log In To remove these advertisements.

05-03-2005, 10:56 PM	#16
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	Tailgate and rear cross sill sold. __________________ Email address- inspector722@aol.com Zip Code- 77611 Shipping- DHL & USPS Working on: 67, large back glass, 307 V8, 200 4R, 3.73 rearend, Short Stepside Bed

05-11-2005, 12:09 PM	#17
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	Just the sides, some cross bars and steps left. Will bring this and a few other parts to the May 28th meet. __________________ Email address- inspector722@aol.com Zip Code- 77611 Shipping- DHL & USPS Working on: 67, large back glass, 307 V8, 200 4R, 3.73 rearend, Short Stepside Bed

04-28-2005, 09:19 PM	#18
shadow20 Registered User Join Date: Apr 2005 Location: SC Posts: 14	Parts When and where is the Pate Meet? Any chance you can hold until July? I don't get my vacation until then. Eric __________________ Eric 1966 Chevy C20, Long Bed, Fleetside 1967 Chevy C10, Short Bed, Stepside

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.