Good price for OEM rear 1/4 panels? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

noorder · 04-25-2005, 10:31 PM

Not sure if this is a good deal so would appreciate some suggestions from the board.

Someone local to me is selling "left and right OEM partial rear quarter panels" for $600.-. They are supposed to be in mint condition.

I checked out Goodmark and Harmons without finding an equivalent piece either OEM or aftermarket. My '77 has _alot_ of rust in the rear quarter so I this sounds interesting.

My question is whether this is a good deal or if someone is trying to fleece me.

Suggestions/comments appreciated!

-Alex

**special-K** · 05-03-2005, 10:19 AM

GM only makes complete panels as assembled at plant.Check cheyennetruckparts.com for a price on non-OEM.It sounds good for OEM.They could have been cut-down.

noorder · 05-04-2005, 08:21 AM

Quote:

Originally Posted by special-K

GM only makes complete panels as assembled at plant.Check cheyennetruckparts.com for a price on non-OEM.It sounds good for OEM.They could have been cut-down.

Going to http://cheyennetruckparts.com redirects me to a search engine (http://newnet.qsrch.com/dpark?s=chey...s.com&prt=nn01). I tried to google for them without success either. Can you give me a different URL?

TIA, Alex

**Captkaos** · 05-03-2005, 11:41 AM

Does it look like any of these:
http://www.73-87chevytrucks.com/merc..._Code=7387Beds

http://www.73-87chevytrucks.com/merc..._Code=7387Beds

noorder · 05-04-2005, 08:16 AM

Quote:

Originally Posted by Captkaos

Does it look like any of these:
http://www.73-87chevytrucks.com/merc..._Code=7387Beds

http://www.73-87chevytrucks.com/merc..._Code=7387Beds

From the description I got over the phone I was told that the panel started at the door frame and wrapped all the way around the rear taillights. That would make them much larger then what you provided links to above.

-Alex

**Captkaos** · 05-04-2005, 04:35 PM

http://www.cheyennepickup.com/

I don't know anyone that supplies those. I had to stop since almost everyone I sold was sent back because it wasn't perfect.

noorder · 06-20-2005, 10:25 PM

Welll I ended up buying the pieces as they were local to me here in NH. Got both the left and right sides for my project truck. They aren't perfect nor do they have inner fenders on them but they are _alot_ better then those panels on my Jimmy right now.

Putting them on looks like it will be quite a bit of work - though the result will be worthwhile once on.

Anyone have a writeup on how to put them on?

Next project - replacing the fuel tank and fuel lines.

-Alex

04-25-2005, 10:31 PM	#1
noorder Registered User Join Date: Mar 2005 Posts: 4	Good price for OEM rear 1/4 panels? Not sure if this is a good deal so would appreciate some suggestions from the board. Someone local to me is selling "left and right OEM partial rear quarter panels" for $600.-. They are supposed to be in mint condition. I checked out Goodmark and Harmons without finding an equivalent piece either OEM or aftermarket. My '77 has _alot_ of rust in the rear quarter so I this sounds interesting. My question is whether this is a good deal or if someone is trying to fleece me. Suggestions/comments appreciated! -Alex

05-03-2005, 10:19 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	GM only makes complete panels as assembled at plant.Check cheyennetruckparts.com for a price on non-OEM.It sounds good for OEM.They could have been cut-down. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-03-2005, 11:41 AM	#4
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Does it look like any of these: http://www.73-87chevytrucks.com/merc..._Code=7387Beds http://www.73-87chevytrucks.com/merc..._Code=7387Beds __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

05-04-2005, 04:35 PM	#6
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	http://www.cheyennepickup.com/ I don't know anyone that supplies those. I had to stop since almost everyone I sold was sent back because it wasn't perfect. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

06-20-2005, 10:25 PM	#7
noorder Registered User Join Date: Mar 2005 Posts: 4	Welll I ended up buying the pieces as they were local to me here in NH. Got both the left and right sides for my project truck. They aren't perfect nor do they have inner fenders on them but they are _alot_ better then those panels on my Jimmy right now. Putting them on looks like it will be quite a bit of work - though the result will be worthwhile once on. Anyone have a writeup on how to put them on? Next project - replacing the fuel tank and fuel lines. -Alex



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.