![]() |
|
![]() |
#1 |
Registered User
Join Date: Jan 2004
Location: Whitehorse YK Canada
Posts: 2,651
|
Cab Supports?
Can someone tell me what these are called, are they cab supports?
How are they replaced?
__________________
Blaine 59 GMC 9314 a.k.a. Whoopee 68 C20 50th Anniversary a.k.a. The Rat http://www.flickr.com/photos/northerngmc/ http://www.members.tripod.com/P-wee/index_032.htm 1.61803 is one H of a lot better than 3.14159, no really it is! |
![]() |
![]() |
![]() |
#2 |
67 is sold
Join Date: Apr 2001
Location: Troy, Michigan
Posts: 6,738
|
Yep - your's aren't as bad as mine
![]() |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: May 2000
Location: Victoria, BC, Canada
Posts: 2,410
|
Yep, cab supports and they can be a real pain in the butt, depending on what kind of tools and facilities you have to work with. I opted to replace them with the cab still on the truck and mounted with a combination of bolts and my trusty little stick welder. But if you have a good MIG welder its much easier. My problem was burning thru the floor panels, thats why I decided to just drill thru the flanges and floor and inserted bolts while tack welding the areas I could mate together.
front left - before and after
__________________
1970 GMC 1500 Custom Original 350/TH350 Victoria, BC, Canada You can wish in one hand and crap in the other. See which one gets filled first. Last edited by Southpa; 05-05-2005 at 12:05 PM. |
![]() |
![]() |
![]() |
#4 |
Confirmed Truckaholic
![]() Join Date: Oct 2000
Location: Sarver,PA 16055
Posts: 732
|
Yes, those are the cab supports. There are two types of replacements, one slips over your bad ones, kind of like a band-aid. The other one you would remove your rusted one first ,then weld or bolt in place depending on your talent.
|
![]() |
![]() |
![]() |
#5 |
I'm watching you!
Join Date: Feb 2005
Location: Levittown, PA
Posts: 1,822
|
Oh thats what cab supports look like
![]() Mike
__________________
2012 Chevrolet Silverado 1500 Z71 4WD 1993 Chevrolet C-1500 W/T - Blue - 4.3L V-6, 4 speed auto - Dad's (RIP) 1992 Chevrolet S10 - LS swap project 1968 Chevrolet C-10 longbed fleetside - sold ![]() |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jan 2004
Location: Whitehorse YK Canada
Posts: 2,651
|
I like the idea of a bolt in replacement as I can do it, but I think the cab needs one corner replaced, and therefore will probably go to a shop.
__________________
Blaine 59 GMC 9314 a.k.a. Whoopee 68 C20 50th Anniversary a.k.a. The Rat http://www.flickr.com/photos/northerngmc/ http://www.members.tripod.com/P-wee/index_032.htm 1.61803 is one H of a lot better than 3.14159, no really it is! |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|