1971 350 engine question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

daniels84 · 05-09-2005, 07:56 PM

Hey, I'm looking a 1971 GMC 1 ton dually that has the original engine 350 in it. Are these 350's a good motor to build up? 4 bolt main? HP from factory? Good heads? Are the 1 ton 350s any different than any of the other truck engines internally? BTW it a 2 barrel. Thanks

JimKshortstep4x4 · 05-09-2005, 08:05 PM

If you can find the suffix code on the front engine pad you can get some pretty good information on the engine.

If it is the original engine than it should be a good one to rebuild as it will be a 4 bolt main. Not sure on the heads as they may have small valves. I have seen some of the larger trucks with engines that have drive in steel plugs in the oil galleries instead of the bolt in style.

There is a good chance that the crank is a steel crank, also.

You will need to verify what the engine is though.

Jim

05-09-2005, 07:56 PM	#1
daniels84 Registered User Join Date: Mar 2004 Location: Edmonton, Alberta, Canada Posts: 16	1971 350 engine question Hey, I'm looking a 1971 GMC 1 ton dually that has the original engine 350 in it. Are these 350's a good motor to build up? 4 bolt main? HP from factory? Good heads? Are the 1 ton 350s any different than any of the other truck engines internally? BTW it a 2 barrel. Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

05-09-2005, 08:05 PM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	If you can find the suffix code on the front engine pad you can get some pretty good information on the engine. If it is the original engine than it should be a good one to rebuild as it will be a 4 bolt main. Not sure on the heads as they may have small valves. I have seen some of the larger trucks with engines that have drive in steel plugs in the oil galleries instead of the bolt in style. There is a good chance that the crank is a steel crank, also. You will need to verify what the engine is though. Jim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.