Small Block Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

oteixeira · 05-19-2005, 10:59 AM

Hi all,

I have made a radical decision, I am going to convert my truck to a Cummins 4BTA motor. Because of this I have some very lightly used small block parts that I see no need to keep around.

off the shelf (local parts store) 70 Chevy Truck quadrajet Carb. Has about 20 hours max run time on it, - SOLD

HEI with cap and rotor, same story as the carb (although cap is used). I got a brand new HEI and never really used it. $45 plus the ride.

Power stearing bracket, resevour and pully $50 plus the ride.

200-4R tranny with universal bolt pattern (Chevy and pontiac) - SOLD

Pretty much brand new (5000 miles) 3 core radiator - SOLD

heat stove and hose - $25 plus ride

Original Air cleaner setup - $30 plus ride

Ask about other engine stuff.....

I am in eastern NC, right off I-95 if you are thinking of picking up things.

Thanks for looking,

Orlando

67ChevyC10Stepside · 05-19-2005, 11:40 AM

how much for the torker and performers? where is the bolt in the performer?

jtminton · 05-19-2005, 11:46 AM

What would you think shipping on the carb to 76036 would be?

oteixeira · 05-19-2005, 11:49 AM

jtminton,

I use Fed Ex ground, they are reasonable and good shippers. I am guessing 15-20 max to ship. Let me know.

Orlando

jtminton · 05-19-2005, 11:52 AM

Let me think on it. If anybody else wants it and has the cash, let them have it, don't hold it for me or anything.

ronh72c10 · 05-19-2005, 12:59 PM

I'm interested in the carb if you'll ship to Canada. (USPS very much preferred though)

Ron

oteixeira · 05-19-2005, 01:06 PM

Ron,

What would shipping to Canada run you, its sounds like it would be very cost prohibitive? Tell me what I need from your address to estimate the shipping.

Orlando

ratrod67 · 05-19-2005, 05:43 PM

How much are the intakes? Would need a price shipped to zip 76133. Thanks!

1STtimePRo'71 · 05-19-2005, 07:28 PM

Interested in the distributor. What brand? And will you ship it? Is it geared for a cam? Lots of questions. PM me please.

Inspector722 · 05-19-2005, 07:29 PM

What kind of shape is the trans in?

ronh72c10 · 05-19-2005, 09:35 PM

Sent a PM with my address.

Ron

cornutz · 05-19-2005, 09:54 PM

what type of choke is that carb? If electric, I would be interested in it as well....

shortbed70 · 05-19-2005, 10:43 PM

I would love the tranny but I just can't afford it right now. Dang it.. TTT anyway

oteixeira · 05-20-2005, 12:03 AM

OK,

Well, by the time I ended up getting home it was dark and I was just lazy about looking at stuff. To anyone I owe pictures or anything, sorry, I will get you the stuff tomorrow. Let me see if I can answer any questions.

The trans - Pulled from a Caddy, worked when pulled, but we are talking a non rebuilt Caddy tranny, I am just not sure how long it is going to last for you in a truck.

The Hei- It is a stock HEI replacement from NAPA, so I guess it is a NAPA brand? There is nothing special about it, just a stock HEI, when I bought it, I told them it was for an 80 Z-28 (since they always want a year and make/model, stupid stores).

The carb- I am almost sure it is electric, since I bought it as a stock replacement for the '70, which is not a manual choke, I will check for sure tomorrow.

RonH - I will have a quote for you in the AM sir.

Thanks,

Orlando

gregbr · 05-20-2005, 12:26 PM

How about the balancer and bottom pullys & drivers side alt brackets? To 29730. Greg

Big Block · 05-20-2005, 09:34 PM

I'm interested in radiator and the power sterring bracket, pump & pully. I live in Durham, could pickup Sat or Sun. Thanks B.B.

oteixeira · 05-20-2005, 09:49 PM

gregbr and bb,

You both have PMs.

Orlando

qksilver · 05-20-2005, 11:56 PM

i would be interested in the trans and radiator, I will be gone for a week but could send you a check tomorrow(Sat) before I leave and pick up when I get back the 30th. Pm me with an address if this works for you.
Thanks,
Steve

qksilver · 05-20-2005, 11:57 PM

Plus the edelbrock manifold..........
thanks

oteixeira · 05-25-2005, 10:19 AM

^^^

knsmodels · 05-25-2005, 10:27 AM

You mean the Stove box on the drivers exhaust and the metal hose going to the aircleaner?? if so let me know shipping to 19007 and PM your address and I will get payment off to you....Thanks....Paul K

oteixeira · 05-25-2005, 10:52 AM

Paul,

It is a metal ring that sits between the carb and air cleaner that has a hose that runs to the oil breather on the passenger side valve cover if I remember right.

Orlando

Greg m · 05-25-2005, 10:54 PM

do you still have the dist.if so how much to hillsville va.24343 thanks

05-19-2005, 10:59 AM	#1
oteixeira Registered User Join Date: Jan 2001 Location: Middlesex, NC Posts: 231	Small Block Parts Hi all, I have made a radical decision, I am going to convert my truck to a Cummins 4BTA motor. Because of this I have some very lightly used small block parts that I see no need to keep around. off the shelf (local parts store) 70 Chevy Truck quadrajet Carb. Has about 20 hours max run time on it, - SOLD HEI with cap and rotor, same story as the carb (although cap is used). I got a brand new HEI and never really used it. $45 plus the ride. Power stearing bracket, resevour and pully $50 plus the ride. 200-4R tranny with universal bolt pattern (Chevy and pontiac) - SOLD Pretty much brand new (5000 miles) 3 core radiator - SOLD heat stove and hose - $25 plus ride Original Air cleaner setup - $30 plus ride Ask about other engine stuff..... I am in eastern NC, right off I-95 if you are thinking of picking up things. Thanks for looking, Orlando __________________ 70 C-20 Custom Camper Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=300251 Last edited by oteixeira; 05-25-2005 at 10:15 AM. Reason: Something sold

05-19-2005, 11:40 AM	#2
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	how much for the torker and performers? where is the bolt in the performer? __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

05-19-2005, 11:46 AM	#3
jtminton II Timothy 4:2 Join Date: Mar 2005 Location: Fort Worth Posts: 361	What would you think shipping on the carb to 76036 would be? __________________ 72 C-20 2WD LWB Custom Camper Deluxe 350 4 Speed "Project Lazarus" MY TRUE PRIDE AND JOY "Dangit, Bobby, people will see that oil stain and think I'm a drunk."

05-19-2005, 11:49 AM	#4
oteixeira Registered User Join Date: Jan 2001 Location: Middlesex, NC Posts: 231	Shipping jtminton, I use Fed Ex ground, they are reasonable and good shippers. I am guessing 15-20 max to ship. Let me know. Orlando __________________ 70 C-20 Custom Camper Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=300251

05-19-2005, 11:52 AM	#5
jtminton II Timothy 4:2 Join Date: Mar 2005 Location: Fort Worth Posts: 361	Let me think on it. If anybody else wants it and has the cash, let them have it, don't hold it for me or anything. __________________ 72 C-20 2WD LWB Custom Camper Deluxe 350 4 Speed "Project Lazarus" MY TRUE PRIDE AND JOY "Dangit, Bobby, people will see that oil stain and think I'm a drunk."

05-19-2005, 12:59 PM	#6
ronh72c10 Senior Member Join Date: Jul 2003 Location: Mount Forest, Ontario, Canada Posts: 978	I'm interested in the carb if you'll ship to Canada. (USPS very much preferred though) Ron __________________ 72 Chevy C10 (rust repaired, starting body work) 72 GMC 3/4ton 4x4 72 Chevy C20 Suburban 38 Ford Tudor Humpback Sedan (from the darkside) 67 Pontiac Parisienne 55 Studebaker Commander 2dr Hardtop (Starliner) My Youtube channel with Video Updates!

05-19-2005, 01:06 PM	#7
oteixeira Registered User Join Date: Jan 2001 Location: Middlesex, NC Posts: 231	Canada? Ron, What would shipping to Canada run you, its sounds like it would be very cost prohibitive? Tell me what I need from your address to estimate the shipping. Orlando __________________ 70 C-20 Custom Camper Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=300251

05-19-2005, 05:43 PM	#8
ratrod67 Registered User Join Date: Sep 2002 Location: DFW Texas Posts: 2,269	How much are the intakes? Would need a price shipped to zip 76133. Thanks!

05-19-2005, 07:28 PM	#9
1STtimePRo'71 Registered User Join Date: Feb 2005 Location: Lake Crystal, MN Posts: 656	Interested in the distributor. What brand? And will you ship it? Is it geared for a cam? Lots of questions. PM me please. __________________ -Cory 1967 2 Wheel Chevy

05-19-2005, 07:29 PM	#10
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	What kind of shape is the trans in? __________________ Email address- inspector722@aol.com Zip Code- 77611 Shipping- DHL & USPS Working on: 67, large back glass, 307 V8, 200 4R, 3.73 rearend, Short Stepside Bed

05-19-2005, 09:35 PM	#11
ronh72c10 Senior Member Join Date: Jul 2003 Location: Mount Forest, Ontario, Canada Posts: 978	Sent a PM with my address. Ron __________________ 72 Chevy C10 (rust repaired, starting body work) 72 GMC 3/4ton 4x4 72 Chevy C20 Suburban 38 Ford Tudor Humpback Sedan (from the darkside) 67 Pontiac Parisienne 55 Studebaker Commander 2dr Hardtop (Starliner) My Youtube channel with Video Updates!

05-19-2005, 09:54 PM	#12
cornutz All Praise RANDY!! Join Date: Sep 2004 Location: Central California Posts: 391	what type of choke is that carb? If electric, I would be interested in it as well....

05-19-2005, 10:43 PM	#13
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	I would love the tranny but I just can't afford it right now. Dang it.. TTT anyway __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

05-20-2005, 12:03 AM	#14
oteixeira Registered User Join Date: Jan 2001 Location: Middlesex, NC Posts: 231	Answers OK, Well, by the time I ended up getting home it was dark and I was just lazy about looking at stuff. To anyone I owe pictures or anything, sorry, I will get you the stuff tomorrow. Let me see if I can answer any questions. The trans - Pulled from a Caddy, worked when pulled, but we are talking a non rebuilt Caddy tranny, I am just not sure how long it is going to last for you in a truck. The Hei- It is a stock HEI replacement from NAPA, so I guess it is a NAPA brand? There is nothing special about it, just a stock HEI, when I bought it, I told them it was for an 80 Z-28 (since they always want a year and make/model, stupid stores). The carb- I am almost sure it is electric, since I bought it as a stock replacement for the '70, which is not a manual choke, I will check for sure tomorrow. RonH - I will have a quote for you in the AM sir. Thanks, Orlando __________________ 70 C-20 Custom Camper Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=300251

05-20-2005, 12:26 PM	#15
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	How about the balancer and bottom pullys & drivers side alt brackets? To 29730. Greg __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424



Register or Log In To remove these advertisements.

05-20-2005, 09:34 PM	#16
Big Block Big Block Join Date: Mar 2005 Location: Durham, N.C. Posts: 1,649	I'm interested in radiator and the power sterring bracket, pump & pully. I live in Durham, could pickup Sat or Sun. Thanks B.B.

05-20-2005, 09:49 PM	#17
oteixeira Registered User Join Date: Jan 2001 Location: Middlesex, NC Posts: 231	Pms gregbr and bb, You both have PMs. Orlando __________________ 70 C-20 Custom Camper Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=300251

05-20-2005, 11:56 PM	#18
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	i would be interested in the trans and radiator, I will be gone for a week but could send you a check tomorrow(Sat) before I leave and pick up when I get back the 30th. Pm me with an address if this works for you. Thanks, Steve

05-20-2005, 11:57 PM	#19
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Plus the edelbrock manifold.......... thanks

05-25-2005, 10:19 AM	#20
oteixeira Registered User Join Date: Jan 2001 Location: Middlesex, NC Posts: 231	^^^ __________________ 70 C-20 Custom Camper Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=300251

05-25-2005, 10:27 AM	#21
knsmodels I make Models Join Date: May 2005 Location: Bucks, PA Posts: 626	I am interested in the Heat stove and hose... You mean the Stove box on the drivers exhaust and the metal hose going to the aircleaner?? if so let me know shipping to 19007 and PM your address and I will get payment off to you....Thanks....Paul K

05-25-2005, 10:52 AM	#22
oteixeira Registered User Join Date: Jan 2001 Location: Middlesex, NC Posts: 231	Heat thingy Paul, It is a metal ring that sits between the carb and air cleaner that has a hose that runs to the oil breather on the passenger side valve cover if I remember right. Orlando __________________ 70 C-20 Custom Camper Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=300251

05-25-2005, 10:54 PM	#23
Greg m Registered User Join Date: May 2005 Posts: 9	do you still have the dist.if so how much to hillsville va.24343 thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.