I NEED THIS BAD: Heat Riser/Stove Pipe - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Steve @ BROTHERS · 05-20-2005, 02:45 PM

I had alot of help on this a few months back when I had some questions and got the answers to them about the proper stovepipe/heat riser setup on my 70 4x4. I even had some luck getting various parts I needed to put a complete setup together, but now I have another need.

I have a stove pipe, no problem, but I recently realized that the heat shields I gathered up that go around the exhaust manifold are for SMOG and my 4x4 doesn't have smog. So, I'm asking here to see if anyone has the 2pc stove pipe heat shield set for a non-smog exhaust manifold that they would like to get rid of? Please conatct me if you do, and thanks in advance!

**StingRay** · 05-20-2005, 05:13 PM

Steve I'm pretty sure I have a backing plate or two as extras but all the fronts are corroded beyond use. The only good one I have is in service on my truck. Should you need just a backing I can probably help out.

cwilkie · 05-20-2005, 09:27 PM

If these parts are for a big block I am interested.

Chance

Steve @ BROTHERS · 05-20-2005, 09:43 PM

Stingray, I'll take what I can get at this point. Email me directly and we'll work it out.

05-20-2005, 02:45 PM	#1
Steve @ BROTHERS Registered User Join Date: Nov 2001 Location: Corona,CA Posts: 48	I NEED THIS BAD: Heat Riser/Stove Pipe I had alot of help on this a few months back when I had some questions and got the answers to them about the proper stovepipe/heat riser setup on my 70 4x4. I even had some luck getting various parts I needed to put a complete setup together, but now I have another need. I have a stove pipe, no problem, but I recently realized that the heat shields I gathered up that go around the exhaust manifold are for SMOG and my 4x4 doesn't have smog. So, I'm asking here to see if anyone has the 2pc stove pipe heat shield set for a non-smog exhaust manifold that they would like to get rid of? Please conatct me if you do, and thanks in advance! __________________ Steve Flanders BROTHERS Toll Free 800-977-2767 Local Phone 951-808-9790 Email Steve@BrothersTrucks.com

05-20-2005, 05:13 PM	#2
StingRay Senior Member Join Date: Mar 2000 Location: Saskatoon,SK,Canada Posts: 2,476	Steve I'm pretty sure I have a backing plate or two as extras but all the fronts are corroded beyond use. The only good one I have is in service on my truck. Should you need just a backing I can probably help out. __________________ Saskatoon, Saskatchewan Canada

05-20-2005, 09:27 PM	#3
cwilkie Chance Join Date: Sep 2001 Location: Belcourt ,ND, USA Posts: 750	Big Block If these parts are for a big block I am interested. Chance __________________ 1968 Chevrolet Stepside BB 396 w/TH400 1972 Chevrolet 3/4 Ton 4x4 BB 496 w/TH400

05-20-2005, 09:43 PM	#4
Steve @ BROTHERS Registered User Join Date: Nov 2001 Location: Corona,CA Posts: 48	Stingray, I'll take what I can get at this point. Email me directly and we'll work it out. __________________ Steve Flanders BROTHERS Toll Free 800-977-2767 Local Phone 951-808-9790 Email Steve@BrothersTrucks.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.