how do you get this off? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67ChevyC10Stepside · 05-25-2005, 10:57 PM

im trieing to replace my heater core box...i bought this new one from burnsman but forgot to ask him how to get the block off rod off......also...on a 86 pickup i am trieing to get the brake booster and MC off of...the rod goes through then is into a bracket...there is a pin there with a little clip...i took the clip off now cant get the pin out...what gives...the truck is supposed to go to scrap this weekend but i need that off...and also is there any other way to get the arm off the steering box than with a fork? i dont have one and am also trieing to get the steering stuff off the 86...

pissonNOS · 05-25-2005, 11:40 PM

for the brake problem can you just iunbolt the brackets? thats how i got my pins out

hgs_notes · 05-25-2005, 11:55 PM

I've pulled the steering arms off with gear pullers before.

HG

67ChevyC10Stepside · 05-26-2005, 12:01 AM

hmm...good idea...ill have to try that tomorrow night..

05-25-2005, 10:57 PM	#1
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	how do you get this off? im trieing to replace my heater core box...i bought this new one from burnsman but forgot to ask him how to get the block off rod off......also...on a 86 pickup i am trieing to get the brake booster and MC off of...the rod goes through then is into a bracket...there is a pin there with a little clip...i took the clip off now cant get the pin out...what gives...the truck is supposed to go to scrap this weekend but i need that off...and also is there any other way to get the arm off the steering box than with a fork? i dont have one and am also trieing to get the steering stuff off the 86... __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

05-25-2005, 11:40 PM	#2
pissonNOS senior member Join Date: Feb 2003 Location: fort macleod alberta Posts: 2,770	for the brake problem can you just iunbolt the brackets? thats how i got my pins out __________________ 69 GMC bagged

05-25-2005, 11:55 PM	#3
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	I've pulled the steering arms off with gear pullers before. HG __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

05-26-2005, 12:01 AM	#4
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	hmm...good idea...ill have to try that tomorrow night.. __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.