WTB PS bracket SBC - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**JIMs70GMC** · 06-06-2005, 06:56 AM

I need the upper ps bracket for a long water pump setup. The bracket attaches to the head and the forward most driver side exhaust manifold bolt. The bracket has the slot for the adjusting tension to the power steering pump belt. Figure shipping to 23323. Thanks,

GMC AMI · 06-06-2005, 07:24 PM

Quote:

Originally Posted by JIMs70GMC

I need the upper ps bracket for a long water pump setup. The bracket attaches to the head and the forward most driver side exhaust manifold bolt. The bracket has the slot for the adjusting tension to the power steering pump belt. Figure shipping to 23323. Thanks,

I can surely provide this small part for you Jim. I will look tout suite and let you know. No charge mon ami!

**JIMs70GMC** · 06-07-2005, 06:14 AM

That will be great Mike! Thanks!

**JIMs70GMC** · 06-13-2005, 08:35 AM

ttt

JimKshortstep4x4 · 06-14-2005, 09:28 AM

JIMs70GMC,

If you did not get the bracket yet let me know as I have one. $6 to your door.

Here is a pic of the one that bolts to the exhaust manifold. Is it the one you need?

Jim

GMC AMI · 06-14-2005, 12:05 PM

Quote:

Originally Posted by JimKshortstep4x4

JIMs70GMC,

If you did not get the bracket yet let me know as I have one. $6 to your door.

Here is a pic of the one that bolts to the exhaust manifold. Is it the one you need?

Jim

That would be the one. Please give me the payment info and I will Paypal you as soon as you do. Then ship it to Jim since I wanted to provide him one. Thank you very much, this would be easier for me than digging out the barn to find.

Mike

**JIMs70GMC** · 06-14-2005, 12:54 PM

Mike I really appreciate that. Jim that is the one. Mike I meant to call you this morning and got caught up in a meeting at work and then my youngest sons end of year party. Poor kids were suffering, it's almost 95 outside and the humidity is just as high. thanks!

JimKshortstep4x4 · 06-14-2005, 07:52 PM

Mike,

I can ship it to you, but if you want to pay for it, I would be glad to go ahead and ship it to Jim, (save on shipping).

I don't have Pay Pal, though.

I will send you a PM.

JIm

GMC AMI · 06-16-2005, 06:02 AM

Quote:

Originally Posted by JimKshortstep4x4

Mike,

I can ship it to you, but if you want to pay for it, I would be glad to go ahead and ship it to Jim, (save on shipping).

I don't have Pay Pal, though.

I will send you a PM.

JIm

Hi Jim, The Mo # is 016836 Thanks!

Mike

06-06-2005, 06:56 AM	#1
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	WTB PS bracket SBC I need the upper ps bracket for a long water pump setup. The bracket attaches to the head and the forward most driver side exhaust manifold bolt. The bracket has the slot for the adjusting tension to the power steering pump belt. Figure shipping to 23323. Thanks, __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

06-07-2005, 06:14 AM	#3
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	That will be great Mike! Thanks! __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

06-13-2005, 08:35 AM	#4
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	ttt __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

06-14-2005, 09:28 AM	#5
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	JIMs70GMC, If you did not get the bracket yet let me know as I have one. $6 to your door. Here is a pic of the one that bolts to the exhaust manifold. Is it the one you need? Jim Attached Images

06-14-2005, 12:54 PM	#7
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Mike I really appreciate that. Jim that is the one. Mike I meant to call you this morning and got caught up in a meeting at work and then my youngest sons end of year party. Poor kids were suffering, it's almost 95 outside and the humidity is just as high. thanks! __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

06-14-2005, 07:52 PM	#8
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Mike, I can ship it to you, but if you want to pay for it, I would be glad to go ahead and ship it to Jim, (save on shipping). I don't have Pay Pal, though. I will send you a PM. JIm

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.