replacement weatherstripping? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

backinblack · 06-06-2005, 03:07 PM

Any low cost alternative to door weatherstripping? I need to replace a piece on a truck I'm selling, but don't want to put another 50.00 from Year One into this truck.....I'll be lucky to get out what I've already put into it, but its a pretty nice truck, but the door weatherstripping is missing altogether....The paint shop couldn't get it off w/out ruining it because someone had glued it in previously.

TIA!!

70c10 · 06-06-2005, 04:12 PM

S-10 truck/Blazer weatherstrip is soooo much nicer than the factory glue on type!. It's heavier duty and it presses in place so you can remove it (for a paint job) then reinstall it. The 71' I am working on had this installed by the former owner and I'm sold on it now. There have been alot of posts about it. It's always available at the junkyard if you are on a really tight budget.

R@nger · 06-06-2005, 06:03 PM

I'm interested in this also.

Will any year S-10 weatherstripping work?

Also is it more or less expensive than ordering exact replacement weatherstripping for our trucks from Year One, LMC, Summit or other such companies.

Thanks

thecatseye66 · 06-06-2005, 06:18 PM

Check out this link...I haven't tried it yet but I'm going to...

http://67-72chevytrucks.com/vboard/s....php3?t=122688

Nima · 06-07-2005, 12:29 AM

I put a set few weeks ago, fitted right on. The problem since then is that door shut very hard. It seems it needs some break in period but in exchange when they are shut you don't hear any noise from outside. I got mine from gmpauls around 60 some dollars. The actuall old fashion ones are around 40-50$ I believe. gmpauls ahs all both version.

backinblack · 06-07-2005, 01:15 AM

Hey! Thanks for the response! That should work perfect for this!

72c5 · 06-07-2005, 02:17 PM

hey Steven B-
How did you finish the ends that are exposed when you take your top off?

**Steven B** · 06-07-2005, 10:31 PM

The weather stripping was for my pickup. The weather stripping on my Blazer is the original replacement. Glue and clamps.

06-06-2005, 03:07 PM	#1
backinblack Registered User Join Date: Aug 2002 Location: Utah Posts: 142	replacement weatherstripping? Any low cost alternative to door weatherstripping? I need to replace a piece on a truck I'm selling, but don't want to put another 50.00 from Year One into this truck.....I'll be lucky to get out what I've already put into it, but its a pretty nice truck, but the door weatherstripping is missing altogether....The paint shop couldn't get it off w/out ruining it because someone had glued it in previously. TIA!! __________________ 69 chevy SWB 70 GTO 65 GTO hardtop 65 GTO ragtop 77 Trans Am Hmmm. Too many pontiacs, not enough chevy trucks yet.

06-06-2005, 04:12 PM	#2
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	S-10 truck/Blazer weatherstrip is soooo much nicer than the factory glue on type!. It's heavier duty and it presses in place so you can remove it (for a paint job) then reinstall it. The 71' I am working on had this installed by the former owner and I'm sold on it now. There have been alot of posts about it. It's always available at the junkyard if you are on a really tight budget. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

06-06-2005, 06:03 PM	#3
R@nger Psalm 23 Join Date: Apr 2005 Location: Utah Posts: 360	I'm interested in this also. Will any year S-10 weatherstripping work? Also is it more or less expensive than ordering exact replacement weatherstripping for our trucks from Year One, LMC, Summit or other such companies. Thanks __________________ 71 GMC Fleetside C15(cab), 3/4 ton, 350, Holley Street Avenger 570cfm carb, TH350 trans, Leaf-springs, 2WD. "Peter are you sleeping on the job? No I have a bug in my eye and I'm trying to suffocate him." - Family Guy

06-06-2005, 06:18 PM	#4
thecatseye66 '68 C-20 396 CST CC Join Date: Mar 2005 Location: Spokane, WA Posts: 454	Check out this link...I haven't tried it yet but I'm going to... http://67-72chevytrucks.com/vboard/s....php3?t=122688 __________________ 68 C-20 396/TH400 CST Custom Camper NOW W/DISC BRAKES 01 Jetta Turbo Daily Driver 84 Yamaha Virago 700 - Alaska to Florida Via Maine & Mexico

06-07-2005, 01:15 AM	#6
backinblack Registered User Join Date: Aug 2002 Location: Utah Posts: 142	Hey! Thanks for the response! That should work perfect for this! __________________ 69 chevy SWB 70 GTO 65 GTO hardtop 65 GTO ragtop 77 Trans Am Hmmm. Too many pontiacs, not enough chevy trucks yet.

06-07-2005, 12:29 AM	#5
Nima Blue 67 Join Date: Apr 2004 Location: Western WA Posts: 1,179	I put a set few weeks ago, fitted right on. The problem since then is that door shut very hard. It seems it needs some break in period but in exchange when they are shut you don't hear any noise from outside. I got mine from gmpauls around 60 some dollars. The actuall old fashion ones are around 40-50$ I believe. gmpauls ahs all both version.

06-07-2005, 02:17 PM	#7
72c5 Registered User Join Date: Dec 2003 Location: Boston Posts: 311	hey Steven B- How did you finish the ends that are exposed when you take your top off?

06-07-2005, 10:31 PM	#8
Steven B Senior Member Join Date: Jan 2000 Location: LHC, AZ Posts: 385	The weather stripping was for my pickup. The weather stripping on my Blazer is the original replacement. Glue and clamps.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.