Tips for taking off brake calipers? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Smokin72on20s · 06-12-2005, 10:02 PM

i am going to be taking my front brake calipers off to paint them, any tips or suggestions?

*Randy70C-10* · 06-12-2005, 10:21 PM

Don't get any brake fluid on them.

Gordo · 06-12-2005, 10:37 PM

Purchase a pair of rebuilts,(or new if you got the bucks) leave plugs in place, wash them with soap and water, dry, tape up boots, prime and paint.

4x4Poet · 06-13-2005, 01:21 AM

What Gordo said.

The paint will stick better to clean, rust-free replacements. If money is no object, I'd use POR15 engine enamel (can be brushed on). With proper prep, it would stick great and handle the heat with aplomb.

If money grows on trees, you might look at whether one of the aftermarket brake upgrade suppliers (SSBrakes, Master Power, etc.) offer stock calipers that have gold iridite treatment. Or whatever that metallic plating is called that cast iron accepts. On the tip of my tongue....:p

Smokin72on20s · 06-13-2005, 04:03 AM

purchase a pair of rebuilt calipers? there is also a squeeking noise coming from my brakes, should i lightly sand the rotor and brake pad? what else can i do while my calipers are off?

GMC AMI · 06-15-2005, 01:23 PM

Quote:

Originally Posted by Smokin72on20s

purchase a pair of rebuilt calipers? there is also a squeeking noise coming from my brakes, should i lightly sand the rotor and brake pad? what else can i do while my calipers are off?

A rebuilt caliper from NAPA for 20 bucks. You would have to turn the rotor down, sand paper would not be that effective. The squeek could be from the GM warning device that the pads are worn out or that the pads have been overheated and are glazed.

PMS · 06-13-2005, 12:25 PM

Bendix / Autozone now sells calipers already coated and rebuilt. I don't know if they have them for our trucks or not, haven't had time to check. They are called Bendix Street HP Powder Coated Calipers in red, yellow, black and silver.

4x4Poet · 06-14-2005, 06:52 AM

Hey! Nice tip PMS. Do you happen to know if they cost a little more than the usual rebuilt calipers?

PMS · 06-14-2005, 08:59 AM

From the ad I have seen, they state that they cost $49.88 each with exchange up to $124.88 each. Like I said above I haven't checked to see if they have them for our trucks yet.

dallas71 · 06-14-2005, 09:16 AM

Just checked autozones web site and the Powder Coated are not available for our trucks...

4x4Poet · 06-15-2005, 06:54 AM

Ah PMS, you got our hopes up for nothing. (j/k)

Actually, the company could expand their line into our trucks one day. It's still something to keep an eye on.

tomatocity · 06-15-2005, 02:49 PM

Same as the others plus...

...Use a paint that with stand the elements and heat. VHT is one brand I use. Be careful with the brake lines or you will be buying new ones?

Quote:

Originally Posted by Smokin72on20s

i am going to be taking my front brake calipers off to paint them, any tips or suggestions?

06-12-2005, 10:02 PM	#1
Smokin72on20s Ebay Junky Join Date: Oct 2003 Location: CO Posts: 893	Tips for taking off brake calipers? i am going to be taking my front brake calipers off to paint them, any tips or suggestions? __________________ 1972 CHEVY C-10 SWB 2WD - Possible Typhoon 4.3 turbo drivetrain.. 1983 Chevy c10 swb 2wd - possible 350tbi supercharged...

06-12-2005, 10:37 PM	#3
Gordo Registered User Join Date: Jan 2001 Location: Killingworth, CT. USA Posts: 3,378	Purchase a pair of rebuilts,(or new if you got the bucks) leave plugs in place, wash them with soap and water, dry, tape up boots, prime and paint. __________________ 1971 C10 swb stepside 350/700R4/3.73posi (retired as of 4/22/03) 1998 S10 short bed 2002 S10 Blazer 1942 Oldsmobile 1958 Massey Harris Pony 1951 Wife Killingworth, Connecticut May those who love us, love us, any of those who do not love us, may God turn their hearts. And if God is unable to turn their hearts, may he turn their ankles so we may know them by their limping. A man who works with his hands is a laborer; a man who works with his hands and his brain is a craftsman; but a man who works with his hands and his brain and his heart is an artist.

06-13-2005, 01:21 AM	#4
4x4Poet Registered User Join Date: Nov 2004 Location: "Under Montana skies." Posts: 1,836	What Gordo said. The paint will stick better to clean, rust-free replacements. If money is no object, I'd use POR15 engine enamel (can be brushed on). With proper prep, it would stick great and handle the heat with aplomb. If money grows on trees, you might look at whether one of the aftermarket brake upgrade suppliers (SSBrakes, Master Power, etc.) offer stock calipers that have gold iridite treatment. Or whatever that metallic plating is called that cast iron accepts. On the tip of my tongue....:p __________________ '71 GMC K20 Suburban, '71 GMC K10 Suburban, '72 Chevy C10 CST Suburban, '72 Chevy K20 clunker pickup.

06-13-2005, 04:03 AM	#5
Smokin72on20s Ebay Junky Join Date: Oct 2003 Location: CO Posts: 893	purchase a pair of rebuilt calipers? there is also a squeeking noise coming from my brakes, should i lightly sand the rotor and brake pad? what else can i do while my calipers are off? __________________ 1972 CHEVY C-10 SWB 2WD - Possible Typhoon 4.3 turbo drivetrain.. 1983 Chevy c10 swb 2wd - possible 350tbi supercharged...

06-14-2005, 06:52 AM	#8
4x4Poet Registered User Join Date: Nov 2004 Location: "Under Montana skies." Posts: 1,836	Hey! Nice tip PMS. Do you happen to know if they cost a little more than the usual rebuilt calipers? __________________ '71 GMC K20 Suburban, '71 GMC K10 Suburban, '72 Chevy C10 CST Suburban, '72 Chevy K20 clunker pickup.

06-12-2005, 10:21 PM	#2
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Don't get any brake fluid on them.

06-13-2005, 12:25 PM	#7
PMS Registered User Join Date: Aug 2004 Location: Overland Park, KS Posts: 79	Bendix / Autozone now sells calipers already coated and rebuilt. I don't know if they have them for our trucks or not, haven't had time to check. They are called Bendix Street HP Powder Coated Calipers in red, yellow, black and silver.

06-14-2005, 08:59 AM	#9
PMS Registered User Join Date: Aug 2004 Location: Overland Park, KS Posts: 79	From the ad I have seen, they state that they cost $49.88 each with exchange up to $124.88 each. Like I said above I haven't checked to see if they have them for our trucks yet.

06-14-2005, 09:16 AM	#10
dallas71 Registered User Join Date: Mar 2004 Location: Corinth,TX Posts: 444	Just checked autozones web site and the Powder Coated are not available for our trucks... __________________ My 1966 LWB Truck My 1966 SWB Truck

06-15-2005, 06:54 AM	#11
4x4Poet Registered User Join Date: Nov 2004 Location: "Under Montana skies." Posts: 1,836	Ah PMS, you got our hopes up for nothing. (j/k) Actually, the company could expand their line into our trucks one day. It's still something to keep an eye on. __________________ '71 GMC K20 Suburban, '71 GMC K10 Suburban, '72 Chevy C10 CST Suburban, '72 Chevy K20 clunker pickup.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.