FREE PARTS.....(I gotta' move this stuff) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Putter · 06-13-2005, 09:16 AM

A while back I sold a ton of stuff to free up some space. Well, this stuff hasn't moved. I have to get rid of these items in a hurry. You simply pay for the shipping and it's yours. (Oh, I won't ship the engine....sorry.)
If you want to come & pick something up, it is 100% free and you can take everything that isn't spoken for.

So, here goes....

Chevy inline 250 with three speed. Complete from carb to pan. Just needs a throw-out bearing for tranny. **FREE** GONE (FINALLY)- Krue

Clutch pedal assembly **FREE**

Manual steering column-Green in color **FREE** GONE- 72ShadeTree

Steering Drag Link **FREE**

Putter · 06-13-2005, 09:19 AM

Drive Shaft - For rear position **FREE**

Manual Steering gearbox (really tight) **FREE** GONE - ndamerau

Engine mounts (For inline-rear position) **FREE**

Manual tranny shift linkage **FREE** GONE - Krue

Fan Shroud-thingy **FREE**

Putter · 06-13-2005, 09:20 AM

Steering shaft **FREE** GONE - tnblazerk5

ANYONE??? You just can't beat free.....Unless I pay you to take it (that offer comes much later, though!!)

72shadetree · 06-13-2005, 09:32 AM

ill take the steering column let me know how much to send you.my zip is 24055

**tnblazerk5** · 06-13-2005, 09:38 AM

Quote:

Originally Posted by Putter

Steering shaft **FREE**

ANYONE??? You just can't beat free.....Unless I pay you to take it (that offer comes much later, though!!)

hey how much to ship that to 37664 ?

Putter · 06-13-2005, 10:09 AM

Checking shipping costs....PMs pending.

krue · 06-13-2005, 10:26 AM

I'll take the engine and tranny and shift linkage if you can wait 'til this weekend for me to pick it up.

krue · 06-13-2005, 10:28 AM

Fact is I'll take anything you have left.

Putter · 06-13-2005, 10:33 AM

Krue,
I will mark the engine/tranny & linkage for ya' man. Once you get here, anything remaining unspoken-for is yours for the taking! Sound fair enough?

djracer · 06-13-2005, 11:40 AM

Putter
What bed length and tranny was the one piece shaft from? I have a buddy that needs one for a turbo 350 short bed truck! My zip is 36093! I would be willing to return the favor if I have something you need!

ndamerau · 06-13-2005, 01:42 PM

I will take the steering gearbox. You can PM your mailing address and the shipping cost to 76108.

Thanks.

Putter · 06-13-2005, 03:20 PM

Sorry for the delay...my DSL crapped out after lunch!!!

DJRacer...originally, it was on a inline 6 with a 3-speed saginaw in the rear position. Here is a picture of the measurement. I measured from the same spot on the other end right at the end of the knuckle-thingy....so like 56-1/4" withouth the yoke.

stelth2002 · 06-13-2005, 04:34 PM

putter, put me in line for the driveline after dj. I will measure my application cause I want to make sure it will work.

Putter · 06-13-2005, 04:45 PM

Done. You are in line sir.

bagged91 · 06-13-2005, 10:45 PM

Next in line for the manual shift column if 72 Shadetree backs down...

L8R - Joe

Putter · 06-14-2005, 08:58 AM

bagged91, I will make a note of it.

Waiting on reply from djracer before moving on to Stelth2002

djracer · 06-14-2005, 01:11 PM

Putter I'll measure it tonight if any way possible!

06-13-2005, 09:16 AM	#1
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	FREE PARTS.....(I gotta' move this stuff) A while back I sold a ton of stuff to free up some space. Well, this stuff hasn't moved. I have to get rid of these items in a hurry. You simply pay for the shipping and it's yours. (Oh, I won't ship the engine....sorry.) If you want to come & pick something up, it is 100% free and you can take everything that isn't spoken for. So, here goes.... Chevy inline 250 with three speed. Complete from carb to pan. Just needs a throw-out bearing for tranny. FREE GONE (FINALLY)- Krue Clutch pedal assembly FREE Manual steering column-Green in color FREE GONE- 72ShadeTree Steering Drag Link FREE Attached Images __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket** Last edited by Putter; 06-13-2005 at 10:34 AM.

06-13-2005, 09:19 AM	#2
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Drive Shaft - For rear position FREE Manual Steering gearbox (really tight) FREE GONE - ndamerau Engine mounts (For inline-rear position) FREE Manual tranny shift linkage FREE GONE - Krue Fan Shroud-thingy FREE Attached Images __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket** Last edited by Putter; 06-14-2005 at 09:32 AM.

06-13-2005, 09:20 AM	#3
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Steering shaft FREE GONE - tnblazerk5 ANYONE??? You just can't beat free.....Unless I pay you to take it (that offer comes much later, though!!) Attached Images __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket** Last edited by Putter; 06-14-2005 at 08:55 AM.

06-13-2005, 09:32 AM	#4
72shadetree KEEP ON TRUCKING Join Date: Sep 2000 Location: martinsville va Posts: 2,563	ill take the steering column let me know how much to send you.my zip is 24055 __________________ 72 cheyenne 2wd lwb 71 k20 sons bassett va

06-13-2005, 10:09 AM	#6
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Checking shipping costs....PMs pending. __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

06-13-2005, 10:26 AM	#7
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	I'll take the engine and tranny and shift linkage if you can wait 'til this weekend for me to pick it up. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck" Last edited by krue; 06-13-2005 at 10:27 AM.

06-13-2005, 10:28 AM	#8
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Fact is I'll take anything you have left. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

06-13-2005, 10:33 AM	#9
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Krue, I will mark the engine/tranny & linkage for ya' man. Once you get here, anything remaining unspoken-for is yours for the taking! Sound fair enough? __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket** Last edited by Putter; 06-13-2005 at 10:36 AM.

06-13-2005, 11:40 AM	#10
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Putter What bed length and tranny was the one piece shaft from? I have a buddy that needs one for a turbo 350 short bed truck! My zip is 36093! I would be willing to return the favor if I have something you need! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

06-13-2005, 01:42 PM	#11
ndamerau Active Member Join Date: Feb 2004 Location: Fort Worth, TX Posts: 122	I will take the steering gearbox. You can PM your mailing address and the shipping cost to 76108. Thanks.

06-13-2005, 03:20 PM	#12
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Sorry for the delay...my DSL crapped out after lunch!!! DJRacer...originally, it was on a inline 6 with a 3-speed saginaw in the rear position. Here is a picture of the measurement. I measured from the same spot on the other end right at the end of the knuckle-thingy....so like 56-1/4" withouth the yoke. Attached Images __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket** Last edited by Putter; 06-13-2005 at 03:20 PM.

06-13-2005, 04:34 PM	#13
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	putter, put me in line for the driveline after dj. I will measure my application cause I want to make sure it will work. __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

06-13-2005, 04:45 PM	#14
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Done. You are in line sir. __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

06-13-2005, 10:45 PM	#15
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Next in line for the manual shift column if 72 Shadetree backs down... L8R - Joe __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

06-14-2005, 08:58 AM	#16
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	bagged91, I will make a note of it. Waiting on reply from djracer before moving on to Stelth2002 __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**



Register or Log In To remove these advertisements.

06-14-2005, 01:11 PM	#17
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Putter I'll measure it tonight if any way possible! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.