Clarify disk brake conversion - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TN70C10 · 06-22-2005, 04:41 PM

I asked about this and someone was nice enough to provide me a link to a thread which I had saved but lost due to having to format. I read through the thread and was a little confused by the end of it but from what I gathered I need booster, master cylinder, upper a arms and spindle from a 87 and lower a arms from a 68 3/4 ton. Is this right? So if I want to lower it later I order drop spindles for a 87? I hate to keep asking the same question but want to be sure before I buy parts (have located a 88 parts truck). Thanks.

TN70C10

krue · 06-22-2005, 07:11 PM

Here's a link to our FAQ page index. Look under suspension related FAQ's and you should find what you need.

krue · 06-22-2005, 07:11 PM

http://67-72chevytrucks.com/vboard/s....php3?t=157669
Forgot the link.

David Johnson · 06-22-2005, 09:43 PM

Early classics sell a disc brake conversion kit and you don't have to change anything as far as upper and lower a-arms. You can also get it with drop spindles. The kit seems high, but everything is the best quality and bolts right on. Just my 2 cents.

06-22-2005, 04:41 PM	#1
TN70C10 Registered User Join Date: Jun 2005 Location: Chattanooga TN Posts: 115	Clarify disk brake conversion I asked about this and someone was nice enough to provide me a link to a thread which I had saved but lost due to having to format. I read through the thread and was a little confused by the end of it but from what I gathered I need booster, master cylinder, upper a arms and spindle from a 87 and lower a arms from a 68 3/4 ton. Is this right? So if I want to lower it later I order drop spindles for a 87? I hate to keep asking the same question but want to be sure before I buy parts (have located a 88 parts truck). Thanks. TN70C10

06-22-2005, 07:11 PM	#2
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Here's a link to our FAQ page index. Look under suspension related FAQ's and you should find what you need. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

06-22-2005, 07:11 PM	#3
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	http://67-72chevytrucks.com/vboard/s....php3?t=157669 Forgot the link. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

06-22-2005, 09:43 PM	#4
David Johnson Registered User Join Date: Dec 2004 Location: Shawnee, OK Posts: 614	Early classics sell a disc brake conversion kit and you don't have to change anything as far as upper and lower a-arms. You can also get it with drop spindles. The kit seems high, but everything is the best quality and bolts right on. Just my 2 cents.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.