Brake problems - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevy4x4girl · 06-25-2005, 05:25 PM

I still havent been able to get my truck on the road! All the brakes bleed besides the rear left. My peddle just goes straight to the floor. What am I doing wrong?!

stueber68 · 06-25-2005, 11:50 PM

Okay the left rear should be the second wheel that you do after the passenger rear, however you probably already know that. If you are only getting a small amount of pressure to none at all out of the right rear the problem is probably going to be a stuck piston on the wheel cylinder ( note: the cylinder does not have to leak to be frozen up). Take the drum off of the truck and see if when you can depress the pistons of the wheel cylinder easily with the bleeder screw open.

06-25-2005, 05:25 PM	#1
chevy4x4girl Registered User Join Date: Feb 2005 Posts: 47	Brake problems I still havent been able to get my truck on the road! All the brakes bleed besides the rear left. My peddle just goes straight to the floor. What am I doing wrong?! __________________ '84 GMC K10 diesel '02 Chevy Camaro SS collectors ed. '91 Chevy Cavalier Z24 http://members.cardomain.com/chevy4x4grl

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

06-25-2005, 11:50 PM	#2
stueber68 1968 C20 Vortec Beast Join Date: Jun 2005 Location: STILLWATER,OKLAHOMA Posts: 483	Okay the left rear should be the second wheel that you do after the passenger rear, however you probably already know that. If you are only getting a small amount of pressure to none at all out of the right rear the problem is probably going to be a stuck piston on the wheel cylinder ( note: the cylinder does not have to leak to be frozen up). Take the drum off of the truck and see if when you can depress the pistons of the wheel cylinder easily with the bleeder screw open.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.