WTB - Burb barn door support braces/brackets - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**CPNE** · 07-05-2005, 11:23 AM

These are the braces (not hinges) that bolt near the top of barn doors that hold the doors in the open position. Parts off lift gate equipped burbs will not work. I need both LH and RH side braces/brackets and associated hardware. Price including shipping to 03580. Thanks.

Below is a pic showing the part needed.

**CPNE** · 07-05-2005, 02:15 PM

Ttt

bagged91 · 07-05-2005, 04:58 PM

I know of a 69 or 70 Panel in a junk yard about an hour from me. If you have no luck, let me know & I will see if I can't get out there for you later this week. Door hardware was intact... Hopefully, truck will still be there!

L8R - Joe

Livrat · 07-05-2005, 08:50 PM

CPNE,
I can help you there.
How many sets would you like? I think I have 6 sets still attached to barn doors.. $40 pr shipped.

**CPNE** · 07-05-2005, 09:06 PM

I need one set, LH and RH side, plus bolts if you have them. It's for a friend so I'll ask. I'm sure he'll spring for it, but i need to verify. I'll PM you when I know for sure.

Thanks

07-05-2005, 11:23 AM	#1
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	WTB - Burb barn door support braces/brackets These are the braces (not hinges) that bolt near the top of barn doors that hold the doors in the open position. Parts off lift gate equipped burbs will not work. I need both LH and RH side braces/brackets and associated hardware. Price including shipping to 03580. Thanks. Below is a pic showing the part needed. Attached Images __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all Last edited by CPNE; 07-05-2005 at 11:37 AM.

07-05-2005, 02:15 PM	#2
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	Ttt __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

07-05-2005, 04:58 PM	#3
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	I know of a 69 or 70 Panel in a junk yard about an hour from me. If you have no luck, let me know & I will see if I can't get out there for you later this week. Door hardware was intact... Hopefully, truck will still be there! L8R - Joe __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

07-05-2005, 09:06 PM	#5
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	I need one set, LH and RH side, plus bolts if you have them. It's for a friend so I'll ask. I'm sure he'll spring for it, but i need to verify. I'll PM you when I know for sure. Thanks __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

07-05-2005, 08:50 PM	#4
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	CPNE, I can help you there. How many sets would you like? I think I have 6 sets still attached to barn doors.. $40 pr shipped.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.