Wanted near Dallas Tx 67-68 frt clip & short bed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

m1028 · 07-06-2005, 05:24 PM

I am looking for all or part of 67-68 frt clip, & a short bed.

Prefer near Dallas Tx.

I have a 72 frt clip to trade with or pay cash.

matt67350 · 07-06-2005, 06:14 PM

I have a 67 grill, 2 68 fenders , 67 core support. $250.00
All are used and need some work, but will make for good daily driver.
Matthew

SCOTI · 07-07-2005, 12:33 AM

I have used L/R short fleet bedsides in decent shape located in Rowlett. $250ea.

m1028 · 07-07-2005, 01:13 PM

Quote:

Originally Posted by matt67350

I have a 67 grill, 2 68 fenders , 67 core support. $250.00
All are used and need some work, but will make for good daily driver.
Matthew

I saw your for sale post, when is a good time to call you ?

matt67350 · 07-07-2005, 12:38 AM

SCOTI,
Are bedsides wood floor or steal floor?

SCOTI · 07-07-2005, 12:42 AM

You know Matt, I never even looked. Is the only difference where they attach @ the back near the tailgate area & the front panel?

matt67350 · 07-07-2005, 01:00 AM

Not sure. Do you thing you can measure the ones you have.
I have a lwb wood, and steel bed that I can look at to measure.

Matthew

SCOTI · 07-07-2005, 01:11 AM

Sure, just let me know what you want measured. I was always under the impression that the bedsides were only different in how they attached front/rear.

IIRC: The steel floor bedsides were actually tacked in place to the floor & the bedside + the front panel was shorter than a front panel for a wood floor truck. The wood floor bedsides have 90° brackets tacked to the bedside & bolted to the floor.

matt67350 · 07-07-2005, 01:21 AM

Thanks,
I'll pm with info.
Matthew

07-06-2005, 05:24 PM	#1
m1028 Registered User Join Date: Jul 2005 Location: TEXAS Posts: 18	Wanted near Dallas Tx 67-68 frt clip & short bed I am looking for all or part of 67-68 frt clip, & a short bed. Prefer near Dallas Tx. I have a 72 frt clip to trade with or pay cash.

07-06-2005, 06:14 PM	#2
matt67350 Registered User Join Date: May 2001 Location: Benbrook, TX Posts: 1,060	I have a 67 grill, 2 68 fenders , 67 core support. $250.00 All are used and need some work, but will make for good daily driver. Matthew __________________ 69 swb stepside, rebuild and upgrade in progress

07-07-2005, 12:33 AM	#3
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,064	I have used L/R short fleet bedsides in decent shape located in Rowlett. $250ea. Attached Images __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.* Last edited by SCOTI; 07-07-2005 at 12:40 AM.

07-07-2005, 12:38 AM	#5
matt67350 Registered User Join Date: May 2001 Location: Benbrook, TX Posts: 1,060	SCOTI, Are bedsides wood floor or steal floor? __________________ 69 swb stepside, rebuild and upgrade in progress

07-07-2005, 12:42 AM	#6
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,064	You know Matt, I never even looked. Is the only difference where they attach @ the back near the tailgate area & the front panel? Attached Images __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

07-07-2005, 01:00 AM	#7
matt67350 Registered User Join Date: May 2001 Location: Benbrook, TX Posts: 1,060	Not sure. Do you thing you can measure the ones you have. I have a lwb wood, and steel bed that I can look at to measure. Matthew __________________ 69 swb stepside, rebuild and upgrade in progress

07-07-2005, 01:11 AM	#8
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,064	Sure, just let me know what you want measured. I was always under the impression that the bedsides were only different in how they attached front/rear. IIRC: The steel floor bedsides were actually tacked in place to the floor & the bedside + the front panel was shorter than a front panel for a wood floor truck. The wood floor bedsides have 90° brackets tacked to the bedside & bolted to the floor. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

07-07-2005, 01:21 AM	#9
matt67350 Registered User Join Date: May 2001 Location: Benbrook, TX Posts: 1,060	Thanks, I'll pm with info. Matthew __________________ 69 swb stepside, rebuild and upgrade in progress

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.