where are you getting your front brake hoses? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Olden Days · 07-07-2005, 01:00 PM

I just tried to buy front brake hoses for 71 C30 at Napa and was told N/A. Anyone know where I can get some?

71swb4x4 · 07-07-2005, 01:22 PM

I would try other parts stores, or a board vendor.

fastwillie 696969 · 07-07-2005, 01:24 PM

check pep boys once i was told that is was obsolete and i just check pep boys out of the blue and they had a part in stock i couldnt belive it but they had after i look around for a week or so at different parts houses

cdowns · 07-07-2005, 02:37 PM

when i tried buying local i found everybody carried the right hose and nobody had the left, got a pair from LMC they worked out well

BubbaGreen · 07-07-2005, 03:02 PM

in-line tube sells them, exactly like originals.

motocrosschump · 07-07-2005, 03:05 PM

Napa told me the same thing, yet the guy made me one under the counter.

motocrosschump · 07-07-2005, 03:06 PM

I think there is a law that metal brake line has to be atleast 8 inches.

67ChevyRedneck · 07-07-2005, 03:33 PM

The NAPA here had them, but they were $52 each. NO WAY! I got mine from LMC for 20 bucks for the pair? It's been a year, I think that's what they were, anyway, I did have to trim a little bit off of them where the c clip thingy goes on the susupension crossmemeber, they wouldnt fit through the hole for some reason! It was an easy mod. Other than that, they fit well.

Olden Days · 07-07-2005, 08:42 PM

thanks for the reply's, I have found some places that list a hose for c20 but nothing yet found for C30 which is what I need. does anyone know if that would be the same hose?

**oldiron** · 07-07-2005, 11:08 PM

The calipers on the 71 are the same as the 73 - 75. So you might try hoses for the 73 on up. the length of the hose will be the deciding factor. You might try this site for info on part numbers. https://www.rockauto.com/dbphp/mfr,WAGNER.
Maybe someone on the 73 and up forum will have the length measurements for you.

lloyd k · 07-08-2005, 01:31 AM

i went with 73s on mine ,but it is a half ton.

Olden Days · 07-08-2005, 10:52 AM

I ended up ordering the ones listed for c20 from atheys. He said he thought they would be the same so we shall see. thanks to all...

07-07-2005, 01:00 PM	#1
Olden Days Living In The Past Join Date: Nov 2003 Location: Rockies Posts: 709	where are you getting your front brake hoses? I just tried to buy front brake hoses for 71 C30 at Napa and was told N/A. Anyone know where I can get some?

07-07-2005, 01:22 PM	#2
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	I would try other parts stores, or a board vendor. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

07-07-2005, 01:24 PM	#3
fastwillie 696969 ~Rest In Peace~ Join Date: May 2005 Location: CALIFORNIA NOR CAL Posts: 9,707	check pep boys once i was told that is was obsolete and i just check pep boys out of the blue and they had a part in stock i couldnt belive it but they had after i look around for a week or so at different parts houses __________________ is it fast ? it has a lighting bolt donut? B___H please, I can remove 90% of your so called "beauty" with a kleenex

07-07-2005, 02:37 PM	#4
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	when i tried buying local i found everybody carried the right hose and nobody had the left, got a pair from LMC they worked out well __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

07-07-2005, 03:02 PM	#5
BubbaGreen Senior Member Join Date: Mar 2001 Location: Cedar Park, TX Posts: 686	in-line tube sells them, exactly like originals. __________________ 71 Chevy C-10 SWB Fleetside RamJet-350/4L60e & Compushift/3.73Posi See it at www.prismnet.com/~grzanich

07-07-2005, 03:05 PM	#6
motocrosschump Registered User Join Date: May 2005 Location: Texarkana, AR 71854 Posts: 397	Napa told me the same thing, yet the guy made me one under the counter. __________________ 2006 Titan SE Crew Cab Daily Driver 2005 Mazda Tribute (Wifes car) 1969 C10 SWB 350/3 Fleet "Max" 1969 Chevelle 2 door 350/3

07-07-2005, 03:06 PM	#7
motocrosschump Registered User Join Date: May 2005 Location: Texarkana, AR 71854 Posts: 397	I think there is a law that metal brake line has to be atleast 8 inches. __________________ 2006 Titan SE Crew Cab Daily Driver 2005 Mazda Tribute (Wifes car) 1969 C10 SWB 350/3 Fleet "Max" 1969 Chevelle 2 door 350/3

07-07-2005, 03:33 PM	#8
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	The NAPA here had them, but they were $52 each. NO WAY! I got mine from LMC for 20 bucks for the pair? It's been a year, I think that's what they were, anyway, I did have to trim a little bit off of them where the c clip thingy goes on the susupension crossmemeber, they wouldnt fit through the hole for some reason! It was an easy mod. Other than that, they fit well. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

07-07-2005, 08:42 PM	#9
Olden Days Living In The Past Join Date: Nov 2003 Location: Rockies Posts: 709	thanks for the reply's, I have found some places that list a hose for c20 but nothing yet found for C30 which is what I need. does anyone know if that would be the same hose?

07-07-2005, 11:08 PM	#10
oldiron Designated Grumpy Old Man Join Date: Oct 2001 Location: arlington, washington usa Posts: 3,095	The calipers on the 71 are the same as the 73 - 75. So you might try hoses for the 73 on up. the length of the hose will be the deciding factor. You might try this site for info on part numbers. https://www.rockauto.com/dbphp/mfr,WAGNER. Maybe someone on the 73 and up forum will have the length measurements for you. __________________ Never let the truth get in the way of a good story 71 Chev 1/2 ton 4X4 LWB Fleetside SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=361222 http://www.youtube.com/watch?v=1LgREwtDfaA 68 Chev 1 ton flat bed http://www.youtube.com/watch?v=0bO8szzlD4A 56 Chev Handyman Wagon http://www.youtube.com/watch?v=9y-6ddpBTkM http://www.youtube.com/watch?v=lbLzZ7zY8wA 56 Chev Belair http://67-72chevytrucks.com/vboard/s...d.php?t=410667 http://www.youtube.com/watch?v=xoW0Ei7ZNIg

07-08-2005, 01:31 AM	#11
lloyd k Registered User Join Date: Feb 2004 Location: columbus,ohio Posts: 201	i went with 73s on mine ,but it is a half ton. __________________ 67 swb gmc,big block cadillac powered,400 turbo,2.73 ratio and disc brakes-basically a frankenstein of many parts-

07-08-2005, 10:52 AM	#12
Olden Days Living In The Past Join Date: Nov 2003 Location: Rockies Posts: 709	I ended up ordering the ones listed for c20 from atheys. He said he thought they would be the same so we shall see. thanks to all...

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.