Update on Progress of the "Cheesewagon"... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bagged91 · 07-09-2005, 11:37 PM

It's been a while since I've posted anything about the old Cheesewagon. Since I got it off of Tom in February, I have done some changes and some minor upgrades... Here's a list...

Added Camaro tach & 86 C10 clock to dash cluster(repainted needles while apart
Added Tilt(truck tilt with van PRND21 & steering wheel)
Added Cruise(mostly original parts, some from later model)
Added AM/FM(van, had a Sony AM/FM/cassette)
Added AM/FM/CD in console
Added glove box light
Painted upper portion of console Parchment(was saddle)
Added Parchment visors(were saddle)
Recarpeted cargo area and made new cargo panels(there were none)
Installed rear seat
Temp. fix of rot in 1/4's & rockers...

I will get into it for real later on

Degreased & cleaned motor & chassis. Repainted motor & painted chassis & underhood sheetmetal.
Added underhood "reel" light from 91 GMC
Added winshield washer bottle overflow

I still have to put on the 68' front clip & finish the body work & suspension(bags).

1STtimePRo'71 · 07-09-2005, 11:42 PM

Very nice. Does the cd player skip in there?

bagged91 · 07-09-2005, 11:44 PM

Here's some pics of the engine compartment...

bagged91 · 07-09-2005, 11:46 PM

It only skips if you hit a BIG pothole. Normal driving and normal bumps it is fine. The only thing that's a PITA is changing the channel or adjusting the volume.

powell72 · 07-09-2005, 11:52 PM

Engine looks great. Nice progress.

Rokcrln · 07-10-2005, 12:10 AM

That tach looks great! What year/model. Don't take this the wrong way, your engine bay looks good but you need to bug bomb the heater housing. Kind of looks unfinished with everything else very finished around it. Just my .02

Kevin

68haywagon · 07-10-2005, 12:23 AM

Looking nice

.

Keep up the good work and keep us posted....I like seeing others move ahead. It motivates me more

.

Mike

FRENCHBLUE72 · 07-10-2005, 09:24 AM

The old cheesewagon is really starting to come around.. I have that same pioneer cd player in my blazer and it works really well,did you get the remote with that stereo cause if so you can use this infred ste up to change channels and pick songs on cd's...

bagged91 · 07-10-2005, 09:57 PM

Thanks guys...
I don't think that the Pioneer headunit I have has the remote sensor in it(I think the next model up had it) but that is certainly an idea I will entertain in the future!!! As far as the firewall/heater box, ect... I am not touching that until I pull the front clip off to do the 68 swap. I plan on adding factory A/C(front & rear) to it so I will need to do some cutting & welding anyway plus I want to repaint the firewall bodycolor again

When I get into that also, I will be installing a new booster/mastercylinder & proportioning valve along with new stainless hardlines so it should be pretty spiffy

Thanks again! I needed some motivation...
L8R - Joe

LUV2XCLR8 · 07-10-2005, 10:00 PM

Rokcrln · 07-10-2005, 10:25 PM

Quote:

Originally Posted by bagged91

Thanks again! I needed some motivation...
L8R - Joe

You think you need motivation! Hell mine is stuffed under a shelf for the next 6+ months. So do me a favor and quit giving me motivation while my hands are tied!!!

Kevin

PS. So whats teh scoop on the tach and clock. Just wat are they out of and how was the install?

Cheesewagon · 07-10-2005, 11:13 PM

Hey Joe she's looking real good. Now I know the old girl got a good home!! Every time I look at her I miss that old burb more. But your doing more to her than I'd ever would have had time to do. Keep up the great work.

Latter Tom.

Roberty · 07-11-2005, 02:31 AM

Bagged91, Is that a AC heater control in a non AC dash? Or are you using it to control an aftermarket AC setup?

**Yukon Jack** · 07-11-2005, 09:37 AM

Looks like a great way to mount the cd player. Very nice.

bagged91 · 07-11-2005, 07:25 PM

Rokcrln,
The tach is from a mid-late 80's Camaro and the clock is a quartz unit from a mid-late 80's fullsize pickup. There are a few articles on the forum for installing the tach and the clock was a trial n error deal but it works well. And I do need the motivation, ya looked at how many I have to do?(check my sig!)

Roberty, that is actually a heater control from a 65 or 66 Caprice. You need to do some modifications to the heater cables and you need the bracket off of a truck A/C controller to bolt it in.

Tom, still pluggin' away. I want to pull it off the road soon so I can do what needs to be done but I'm having to much fun driving it! She's a good truck for sure. If I ever decide to part with it, I'lle be sure to let you know first

L8R - Joe

**tnblazerk5** · 07-11-2005, 08:28 PM

lookin good there !!!!!!!! where did ya get the box the radio is in ,in the center console ?

Rokcrln · 07-12-2005, 12:43 AM

Quote:

Originally Posted by bagged91

Rokcrln,
The tach is from a mid-late 80's Camaro and the clock is a quartz unit from a mid-late 80's fullsize pickup. There are a few articles on the forum for installing the tach and the clock was a trial n error deal but it works well. And I do need the motivation, ya looked at how many I have to do?(check my sig!)

L8R - Joe

Thanks for the info! You sound like me with projects.

71 SWB, body dropped, LT1 AOD, tubbed(335/35/17), "Z"d frame, soon to start Suicide doors,PW and CC

2005 Rock crawling buggy, 4link front and rear, 37" MTR's

71 Bronco third in line will be getting a full custom tube chassie, 2wd, 4link rear, bagged (rockers in the dirt), injected AOD also suicide doors,pw,pb,cc,ps, 1000wats.

99 PSD extended cab long bed to get a bed chop down to about 5to 5 1/2 feet, dropped (bagged or sprung?) 22"/24" tires, 3 stage chiP and exhaust.

2000 chevy 3/4 ton, 6L, auto, 256K

2004 mini cooper S (our street go kart) To get smaller super charger pully, bigger brakes, exhaust.

1928 craftsman bungalow 1700sq/ft, with a 25x45 shop, 12x20 two story guest house and in need of a full rebuild.

1978 GF, always in need of some work.

Kevin
Winters ca. 95694

86swb · 07-12-2005, 10:52 AM

How does your cruse work. I have a complet set ready to go in mine. Have not got around to getting it in yet. It is OE with some new parts that a guy had but never got around to installing. I am not going to let this happen to me. Good job on your installs.

**Hart_Rod** · 07-12-2005, 12:59 PM

Looking good man! Thanks for the pics.

Rob

Rokcrln · 07-12-2005, 08:28 PM

If the CC question was directed at me I am no help as the truck is still in the build stage. Mine is an after market kit I bought a year or two ago. It is designed for hot rods or atleast that was the mag that did the install that I saw.

Kevin

bagged91 · 07-12-2005, 09:28 PM

tnblazer - That is one of the boxes you can buy at "Pepboys" or anyother place that sells Kayaks, motorcylcles, BBQ's and just about everything else except autoparts(sorry, still venting on that! They didn't have a Flipping set of plugs for a small block!) Anyway, it cost around $20 for the box, a couple bux for the vinyl dye and about 45 minutes to install. I just made a template of the opening, traced it on the box and trimmed with the dremel. Cut a small hole in the bottom of the console to run the wires out under the mat. I actually got the idea from the blazer board. Don't remember who's it was but I think it was a copper colored one with some nice kickpanel enclosures...

Rokcrln, yeah, I didn't mention the cars or boat at my ol' mans house. Tom(Cheesewagon) has seen them. These still need to be done: 86 Iroc, 3-69 Firebirds, 69 RS/SS Camaro, 70 Bonneville, 66 Catalina, 56 Nomad, 52 Chevy Fleetline, 40 Ford Deluxe sdn and a 52 Shephard 22' Mahogany speedboat. The muscle is mine, the older stuff is my dads. Now, the Sears house is neat. My dad has some of the old catalogs with those houses in them. That's like the ultimate piece to have in your Craftsman collection!

86swb, Believe it or not, I haven't gotten it to work yet(it is all hooked up though!). I have tried but I think my transducer is bad. I tried another and that one just leaked vacumm. Guess it's time to spring for a new one. It will be nice to have it working though! Good Luck on yours!

And thanks Rob!

**tnblazerk5** · 07-12-2005, 10:28 PM

cool thanks i will have to try that myself

farmaller · 07-13-2005, 07:19 AM

Looks Awsome!
Anyone have the link to the Camero Tach install since the search feature is disabled?

bagged91 · 07-13-2005, 03:32 PM

Farmaller, you & my neighbor would get along great! He is thinking of painting his 72 GMC Farmall Red with silver wheels...

Here's one link to the tach install. http://67-72chevytrucks.com/vboard/s...threadid=82148

farmaller · 07-14-2005, 05:05 AM

Thanks for the link bagged91, Tell your neighbor that if he uses Farmall colors he has to get Farmall "Super C" decals for the front fenders

07-09-2005, 11:37 PM	#1
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Update on Progress of the "Cheesewagon"... It's been a while since I've posted anything about the old Cheesewagon. Since I got it off of Tom in February, I have done some changes and some minor upgrades... Here's a list... Added Camaro tach & 86 C10 clock to dash cluster(repainted needles while apart Added Tilt(truck tilt with van PRND21 & steering wheel) Added Cruise(mostly original parts, some from later model) Added AM/FM(van, had a Sony AM/FM/cassette) Added AM/FM/CD in console Added glove box light Painted upper portion of console Parchment(was saddle) Added Parchment visors(were saddle) Recarpeted cargo area and made new cargo panels(there were none) Installed rear seat Temp. fix of rot in 1/4's & rockers... I will get into it for real later on Degreased & cleaned motor & chassis. Repainted motor & painted chassis & underhood sheetmetal. Added underhood "reel" light from 91 GMC Added winshield washer bottle overflow I still have to put on the 68' front clip & finish the body work & suspension(bags). Attached Images __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project" Last edited by bagged91; 07-09-2005 at 11:40 PM.

07-09-2005, 11:42 PM	#2
1STtimePRo'71 Registered User Join Date: Feb 2005 Location: Lake Crystal, MN Posts: 656	Very nice. Does the cd player skip in there? __________________ -Cory 1967 2 Wheel Chevy

07-09-2005, 11:44 PM	#3
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	The engine... Here's some pics of the engine compartment... Attached Images __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

07-09-2005, 11:46 PM	#4
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	It only skips if you hit a BIG pothole. Normal driving and normal bumps it is fine. The only thing that's a PITA is changing the channel or adjusting the volume. __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

07-09-2005, 11:52 PM	#5
powell72 Senior Member Join Date: Jan 2005 Location: Loveland Co. Posts: 3,098	Engine looks great. Nice progress. __________________ Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html

07-10-2005, 12:10 AM	#6
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	That tach looks great! What year/model. Don't take this the wrong way, your engine bay looks good but you need to bug bomb the heater housing. Kind of looks unfinished with everything else very finished around it. Just my .02 Kevin

07-10-2005, 12:23 AM	#7
68haywagon I'm watching you! Join Date: Feb 2005 Location: Levittown, PA Posts: 1,822	Looking nice . Keep up the good work and keep us posted....I like seeing others move ahead. It motivates me more . Mike __________________ 2012 Chevrolet Silverado 1500 Z71 4WD 1993 Chevrolet C-1500 W/T - Blue - 4.3L V-6, 4 speed auto - Dad's (RIP) 1992 Chevrolet S10 - LS swap project 1968 Chevrolet C-10 longbed fleetside - sold

07-10-2005, 09:24 AM	#8
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	The old cheesewagon is really starting to come around.. I have that same pioneer cd player in my blazer and it works really well,did you get the remote with that stereo cause if so you can use this infred ste up to change channels and pick songs on cd's... Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-10-2005, 09:57 PM	#9
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Thanks guys... I don't think that the Pioneer headunit I have has the remote sensor in it(I think the next model up had it) but that is certainly an idea I will entertain in the future!!! As far as the firewall/heater box, ect... I am not touching that until I pull the front clip off to do the 68 swap. I plan on adding factory A/C(front & rear) to it so I will need to do some cutting & welding anyway plus I want to repaint the firewall bodycolor again When I get into that also, I will be installing a new booster/mastercylinder & proportioning valve along with new stainless hardlines so it should be pretty spiffy Thanks again! I needed some motivation... L8R - Joe __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

07-10-2005, 10:00 PM	#10
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	__________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

07-10-2005, 11:13 PM	#12
Cheesewagon Senior Member Join Date: Jan 2002 Location: Perrysburg, Ohio, USA Posts: 409	Hey Joe she's looking real good. Now I know the old girl got a good home!! Every time I look at her I miss that old burb more. But your doing more to her than I'd ever would have had time to do. Keep up the great work. Latter Tom. __________________ '91 suburban 350 TBI - R 700 4 new daily driver '72 Cheyenne Super 49,000miles 350/350 frame up resto w/ matching numbers.

07-11-2005, 02:31 AM	#13
Roberty Hot Damn - Here I Am!! Join Date: Feb 2000 Location: Ringgold, Georgia Posts: 726	Bagged91, Is that a AC heater control in a non AC dash? Or are you using it to control an aftermarket AC setup? __________________ My vehicles: '90 Silverado Sport '71 Chevelle SS Convertible '70 C-10 - My Grandfather bought it new - original un-restored Last edited by Roberty; 07-11-2005 at 02:32 AM.

07-11-2005, 09:37 AM	#14
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Looks like a great way to mount the cd player. Very nice. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

07-11-2005, 07:25 PM	#15
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Rokcrln, The tach is from a mid-late 80's Camaro and the clock is a quartz unit from a mid-late 80's fullsize pickup. There are a few articles on the forum for installing the tach and the clock was a trial n error deal but it works well. And I do need the motivation, ya looked at how many I have to do?(check my sig!) Roberty, that is actually a heater control from a 65 or 66 Caprice. You need to do some modifications to the heater cables and you need the bracket off of a truck A/C controller to bolt it in. Tom, still pluggin' away. I want to pull it off the road soon so I can do what needs to be done but I'm having to much fun driving it! She's a good truck for sure. If I ever decide to part with it, I'lle be sure to let you know first L8R - Joe __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

07-11-2005, 08:28 PM	#16
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	lookin good there !!!!!!!! where did ya get the box the radio is in ,in the center console ?



Register or Log In To remove these advertisements.

07-12-2005, 10:52 AM	#18
86swb Born a Chevy Man Join Date: Apr 2005 Location: Navarre, Florida Posts: 10,221	How does your cruse work. I have a complet set ready to go in mine. Have not got around to getting it in yet. It is OE with some new parts that a guy had but never got around to installing. I am not going to let this happen to me. Good job on your installs. __________________ John or 86 (Viet Nam combat Vet-BIG RED ONE) '65-'66 1986 Chevy SWB Silverado 1984 Chevy Longbed Silverado New Kia Sportage (Wife's car and she loves it) CHEVY, American made w/pride! If you can read this, YOU NEED TO THANK A TEACHER! If you can read this in ENGLISH, PLEASE THANK A SOLDIER! GOD BLESS AMERICA AND BLESS OUR FIGHTING TROOPS

07-12-2005, 12:59 PM	#19
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Looking good man! Thanks for the pics. Rob __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

07-12-2005, 08:28 PM	#20
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	If the CC question was directed at me I am no help as the truck is still in the build stage. Mine is an after market kit I bought a year or two ago. It is designed for hot rods or atleast that was the mag that did the install that I saw. Kevin

07-12-2005, 09:28 PM	#21
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	tnblazer - That is one of the boxes you can buy at "Pepboys" or anyother place that sells Kayaks, motorcylcles, BBQ's and just about everything else except autoparts(sorry, still venting on that! They didn't have a Flipping set of plugs for a small block!) Anyway, it cost around $20 for the box, a couple bux for the vinyl dye and about 45 minutes to install. I just made a template of the opening, traced it on the box and trimmed with the dremel. Cut a small hole in the bottom of the console to run the wires out under the mat. I actually got the idea from the blazer board. Don't remember who's it was but I think it was a copper colored one with some nice kickpanel enclosures... Rokcrln, yeah, I didn't mention the cars or boat at my ol' mans house. Tom(Cheesewagon) has seen them. These still need to be done: 86 Iroc, 3-69 Firebirds, 69 RS/SS Camaro, 70 Bonneville, 66 Catalina, 56 Nomad, 52 Chevy Fleetline, 40 Ford Deluxe sdn and a 52 Shephard 22' Mahogany speedboat. The muscle is mine, the older stuff is my dads. Now, the Sears house is neat. My dad has some of the old catalogs with those houses in them. That's like the ultimate piece to have in your Craftsman collection! 86swb, Believe it or not, I haven't gotten it to work yet(it is all hooked up though!). I have tried but I think my transducer is bad. I tried another and that one just leaked vacumm. Guess it's time to spring for a new one. It will be nice to have it working though! Good Luck on yours! And thanks Rob! __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

07-12-2005, 10:28 PM	#22
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	cool thanks i will have to try that myself

07-13-2005, 07:19 AM	#23
farmaller Registered User Join Date: Nov 2004 Location: Rudolph, WI. Posts: 66	Looks Awsome! Anyone have the link to the Camero Tach install since the search feature is disabled? __________________ Currently helping a Friend build a 71 Custom Camper into his dream truck Guess that makes me the Middle man since he asks questions and I search for the answers

07-13-2005, 03:32 PM	#24
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Farmaller, you & my neighbor would get along great! He is thinking of painting his 72 GMC Farmall Red with silver wheels... Here's one link to the tach install. http://67-72chevytrucks.com/vboard/s...threadid=82148 __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

07-14-2005, 05:05 AM	#25
farmaller Registered User Join Date: Nov 2004 Location: Rudolph, WI. Posts: 66	Thanks for the link bagged91, Tell your neighbor that if he uses Farmall colors he has to get Farmall "Super C" decals for the front fenders __________________ Currently helping a Friend build a 71 Custom Camper into his dream truck Guess that makes me the Middle man since he asks questions and I search for the answers

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.