Power Steering Bracket - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1972ChevyCheyenne · 07-19-2005, 11:36 AM

1972 Chevy LWB with a 350 engine. I am missing the part of the power steering bracket the bolt to the motor mount. Just wondering what other cars/trucks/vans and what years used them. Thanks Jamie

tomatocity · 07-19-2005, 03:00 PM

I will send pics tonight after I remove mine.

1972ChevyCheyenne · 07-19-2005, 03:08 PM

Tomatocity

I got a good idea what it looks like, but wrecking yards do have anything 67-72 trucks around. So I need to know what other vehicle I might be able to get them off. Jamie

70GMCer · 07-19-2005, 04:51 PM

They are repro'd from "The Truck Shop" in California. I just got mine the other week. They sell the kit. You get the saddle bracket and the bracket that bolts to the mtr mount. I think it was $39.00 for the set.......

Sweet72 · 07-19-2005, 05:00 PM

If you're talking about the cast iron piece...I got mine off a 80's van with SB v8. Wish I could be more specific as far as years these were used.

gr8scott51 · 07-19-2005, 05:14 PM

I bought new stuff from www.alangrovecomponents.com that let me mount the alternator lower on the block.

Tx Firefighter · 07-19-2005, 07:04 PM

There are actually 2 kinds used on 67-72 trucks. I clicked a picture of each.

07-19-2005, 11:36 AM	#1
1972ChevyCheyenne Registered User Join Date: Sep 2004 Location: Teeswater, Ontario, Canada Posts: 173	Power Steering Bracket 1972 Chevy LWB with a 350 engine. I am missing the part of the power steering bracket the bolt to the motor mount. Just wondering what other cars/trucks/vans and what years used them. Thanks Jamie

07-19-2005, 03:00 PM	#2
tomatocity Registered User Join Date: Jun 2005 Location: Sacramento CA Posts: 1,255	I will send pics tonight after I remove mine. __________________ Got bored, sold everthing. Got bored, looking for a 1960-66 C-10. Want to build my last truck.

07-19-2005, 04:51 PM	#4
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	They are repro'd from "The Truck Shop" in California. I just got mine the other week. They sell the kit. You get the saddle bracket and the bracket that bolts to the mtr mount. I think it was $39.00 for the set....... __________________ 1997 GMC Sierra Ext 1965 Mustang

07-19-2005, 05:00 PM	#5
Sweet72 Registered User Join Date: Nov 2003 Location: Alexandria, VA Posts: 1,534	If you're talking about the cast iron piece...I got mine off a 80's van with SB v8. Wish I could be more specific as far as years these were used. __________________ '72 GMC SWB C1500 Custom, frame-off in progress. 383 SBC, 9:1CR, Comp Cams XE262H, Scat internal balanced crank, Eagle SIR 6" rods, Keith Black dish pistons, Dart Iron Eagle 72/180 heads, Weiand Stealth intake, Stewart stage I water pump, Holley 4bbl vac sec, TH350 with B&M Shift Improver Kit. 12 bolt positraction.

07-19-2005, 05:14 PM	#6
gr8scott51 Registered User Join Date: Mar 2003 Location: Bremerton, WA Posts: 1,839	I bought new stuff from www.alangrovecomponents.com that let me mount the alternator lower on the block. __________________ Silence is golden, duct tape is silver. - Scott

07-19-2005, 03:08 PM	#3
1972ChevyCheyenne Registered User Join Date: Sep 2004 Location: Teeswater, Ontario, Canada Posts: 173	Tomatocity I got a good idea what it looks like, but wrecking yards do have anything 67-72 trucks around. So I need to know what other vehicle I might be able to get them off. Jamie

07-19-2005, 07:04 PM	#7
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	There are actually 2 kinds used on 67-72 trucks. I clicked a picture of each. __________________ I'm on the Instagram- @Gearhead_Kevin Last edited by Tx Firefighter; 07-19-2005 at 07:04 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.