72 gmc 2wd 3/4 ton short bed for sale or parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

T_Raven · 07-20-2005, 11:06 AM

need to get rid of some projects. i shortened the frame and the bed. the bed sides were made out of the long bed sides. the truck has ac, power steering and brakes. all the parts for the ac are there but i'm sure most need replaced. the cab, hood, right door and fender are good. the rocker panels are rusty but the cab corners are pretty solid. the driver's side door and fender are rusted. the grill has a couple small dents and sume rust speckled on it. it has a 350/th350. runs good, hei distributor. runs on propane. gas tank and lines are gone. i started to lower the truck. i cut the front springs and started an axle flip. the perches need to be welded to the axle and the frame needs to be notched. the bed of this truck was mostly an experiment and it would look decent till i could find a good short bed, but this bed wouldn't ever be good enough to paint. this truck was just gonna be a cheap driver i could experiment on. the best parts are the engine, trans and cab, and based on those parts i've been asking $300 for the engine, $100 for the tranny, $300 for the cab, $700 for the whole thing

T_Raven · 07-20-2005, 11:19 AM

well i was gonna post some pictures but i can't figure out how to set that camera so it will take a small enough picture to be able to post it but i can email some if anyone is interested.

panhandler62 · 07-20-2005, 11:26 AM

You can use the built in photoeditor in XP or win 2k to resize pictures. It isn't ideal, but it's usualy good enough. It should be available from the context menu (right click on the picture in the folder and choose "open with")

T_Raven · 07-20-2005, 01:31 PM

ok, here are a couple pics

T_Raven · 07-20-2005, 01:40 PM

profile

427mike · 07-20-2005, 05:20 PM

how about the heater core cover ?

*FUNMUDDER* · 07-20-2005, 08:39 PM

I've never seen a 3/4 ton shortbed. is that custom made or factory stock?

qmans67 · 07-20-2005, 09:26 PM

is there alot of filler in the bed? i think the bed with a little work would look ok u should have no problem selling this "one of a kind" i will talk to a few people and see if they may be interested i would buy but have to many toys of my own right now just not enough room or time.......

bagged91 · 07-20-2005, 11:08 PM

Would you be interested in selling the brackets and lines from the A/C system? Price with shipping to NJ 08071. Pics if possible to joeking1104@msn.com

Thanks...

Joe

bagged91 · 07-22-2005, 03:37 PM

???

samwise68 · 07-26-2005, 05:01 PM

how much for the 2 front fenders? thanks.

masterbeavis · 07-26-2005, 08:40 PM

whats inside the rear axle? Its an eaton correct?

T_Raven · 07-31-2005, 09:55 PM

no idea whats in the axle. i can take a look if you can tell me what to look for

07-20-2005, 11:06 AM	#1
T_Raven Registered User Join Date: Feb 2005 Location: Idaho Falls, Id Posts: 86	72 gmc 2wd 3/4 ton short bed for sale or parts need to get rid of some projects. i shortened the frame and the bed. the bed sides were made out of the long bed sides. the truck has ac, power steering and brakes. all the parts for the ac are there but i'm sure most need replaced. the cab, hood, right door and fender are good. the rocker panels are rusty but the cab corners are pretty solid. the driver's side door and fender are rusted. the grill has a couple small dents and sume rust speckled on it. it has a 350/th350. runs good, hei distributor. runs on propane. gas tank and lines are gone. i started to lower the truck. i cut the front springs and started an axle flip. the perches need to be welded to the axle and the frame needs to be notched. the bed of this truck was mostly an experiment and it would look decent till i could find a good short bed, but this bed wouldn't ever be good enough to paint. this truck was just gonna be a cheap driver i could experiment on. the best parts are the engine, trans and cab, and based on those parts i've been asking $300 for the engine, $100 for the tranny, $300 for the cab, $700 for the whole thing

07-20-2005, 11:19 AM	#2
T_Raven Registered User Join Date: Feb 2005 Location: Idaho Falls, Id Posts: 86	pics well i was gonna post some pictures but i can't figure out how to set that camera so it will take a small enough picture to be able to post it but i can email some if anyone is interested.

07-20-2005, 11:26 AM	#3
panhandler62 Java Mechanic Join Date: Jun 2005 Location: Martinsburg, WV Posts: 6,763	You can use the built in photoeditor in XP or win 2k to resize pictures. It isn't ideal, but it's usualy good enough. It should be available from the context menu (right click on the picture in the folder and choose "open with") __________________ Keith 11 Lincoln MKT -- Momma's wagon 13 G37xS -- middle age crazy car 68 C20 Fleetside -- RIP Decorating the whole town up at a cost of $27 ....

07-20-2005, 01:31 PM	#4
T_Raven Registered User Join Date: Feb 2005 Location: Idaho Falls, Id Posts: 86	ok, here are a couple pics Attached Images

07-20-2005, 01:40 PM	#5
T_Raven Registered User Join Date: Feb 2005 Location: Idaho Falls, Id Posts: 86	profile Attached Images

07-20-2005, 05:20 PM	#6
427mike Junior Member Join Date: Apr 2005 Location: Novi, Michigan Posts: 55	how about the heater core cover ?

07-20-2005, 08:39 PM	#7
FUNMUDDER Account Suspended Join Date: Jun 2005 Location: Maine Posts: 427	I've never seen a 3/4 ton shortbed. is that custom made or factory stock?

07-20-2005, 09:26 PM	#8
qmans67 Registered User Join Date: Jun 2005 Posts: 6	is there alot of filler in the bed? i think the bed with a little work would look ok u should have no problem selling this "one of a kind" i will talk to a few people and see if they may be interested i would buy but have to many toys of my own right now just not enough room or time.......

07-20-2005, 11:08 PM	#9
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Would you be interested in selling the brackets and lines from the A/C system? Price with shipping to NJ 08071. Pics if possible to joeking1104@msn.com Thanks... Joe __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

07-22-2005, 03:37 PM	#10
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	??? __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

07-26-2005, 05:01 PM	#11
samwise68 FarmBoy. Join Date: Feb 2005 Location: Rhinelander, WI Posts: 1,103	how much for the 2 front fenders? thanks.

07-26-2005, 08:40 PM	#12
masterbeavis Having issues Join Date: Jul 2005 Location: Eldorado Ca, an hour east of sacramento Posts: 696	whats inside the rear axle? Its an eaton correct? __________________ Quando Omni Flunkus Moritati. The Man's Prayer: "I'm a man, but I can change, if I have to, I guess."

07-31-2005, 09:55 PM	#13
T_Raven Registered User Join Date: Feb 2005 Location: Idaho Falls, Id Posts: 86	no idea whats in the axle. i can take a look if you can tell me what to look for

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.