94 k1500 fuel problems - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Theront · 07-20-2005, 08:27 PM

Ok here goes, I had a problem with the fuel pump in January. Changed the fuel pump and managed to knock the float arm loose from the sending unit. Remember it is January and I have no garage. BTW I live in WI. Two weeks ago decided to drop tank and reattach the float. That was successful, then pump acted up again last week. So I put another pump in it, now for the real problem. The fuel lines are leaking on the sending unit, I know I can't get them apart only leaks when ignition on. I am in need of sending unit and fairly rust free lines along the rails. I know the lines are the tought part.
Theront

99-2door · 07-21-2005, 02:06 PM

You need to list cab and bed configuration. The lines are different for each one.

Theront · 07-21-2005, 07:38 PM

Sorry,
Extended cab and short box

I am going to drop the tank and see if I can flare a line and salvage anything, I still have to drive everyday.

my72k20 · 07-21-2005, 08:44 PM

do you know if what you need is the same for a 2wd I have a complete frame with tank and fuel lines it was a 94 c1500 extended cab short bed, the pump is new. let me know.

Theront · 07-21-2005, 09:56 PM

I think it would be the same if not it would be made the same. How rusty are the lines and sending unit. I know I can't get the lines apart at the sending unit. Let me know please.

my72k20 · 07-22-2005, 08:35 AM

Last I looked they were in great shape. I will take a good look at the set up this weekend

bagged91 · 07-22-2005, 03:45 PM

If that don't work for you, try inlinetube.com I ordered my stainless brakelines from them for my 91' Ex Cab LB. They also have fuel & tranny lines...

L8R - Joe

Theront · 07-22-2005, 05:36 PM

Thanks for everyones help I broke down today and purchased a new sending unit, I am attempting to get the lines loose, I will come up with something to make it work. I am making a gas vapor or fog with the line as it is, it slowly collects on the frame and runs. I think serious safety concern.

Thanks
Theront

Theront · 07-22-2005, 10:23 PM

To ease the minds. I have fixed the truck, don't know how long the lines will last but they are not leaking at this time and the sending unit has been replaced. I might be interested in lines yet if they were reasonable. Preventative measure
Theront

07-20-2005, 08:27 PM	#1
Theront Registered User Join Date: Jan 2005 Location: Chilton, WI Posts: 8	94 k1500 fuel problems Ok here goes, I had a problem with the fuel pump in January. Changed the fuel pump and managed to knock the float arm loose from the sending unit. Remember it is January and I have no garage. BTW I live in WI. Two weeks ago decided to drop tank and reattach the float. That was successful, then pump acted up again last week. So I put another pump in it, now for the real problem. The fuel lines are leaking on the sending unit, I know I can't get them apart only leaks when ignition on. I am in need of sending unit and fairly rust free lines along the rails. I know the lines are the tought part. Theront

07-21-2005, 02:06 PM	#2
99-2door Registered User Join Date: Oct 2003 Location: Broken Bow, OK Posts: 1,385	You need to list cab and bed configuration. The lines are different for each one. __________________ 95 K3500 SRW 5.7L Vortec 4L80e 4.10 G80 2001 GMC C3 6.0 AWD, Volant, 3/5 drop TBSS intake, HP tuners, pullies, 05 efans, 05 front brakes, etc. 2003 Tahoe Z71 Silverado front clip

07-21-2005, 08:44 PM	#4
my72k20 Registered User Join Date: Dec 2004 Posts: 23	do you know if what you need is the same for a 2wd I have a complete frame with tank and fuel lines it was a 94 c1500 extended cab short bed, the pump is new. let me know. Last edited by my72k20; 07-21-2005 at 08:45 PM.

07-22-2005, 03:45 PM	#7
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	If that don't work for you, try inlinetube.com I ordered my stainless brakelines from them for my 91' Ex Cab LB. They also have fuel & tranny lines... L8R - Joe __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

07-21-2005, 07:38 PM	#3
Theront Registered User Join Date: Jan 2005 Location: Chilton, WI Posts: 8	Sorry, Extended cab and short box I am going to drop the tank and see if I can flare a line and salvage anything, I still have to drive everyday.

07-21-2005, 09:56 PM	#5
Theront Registered User Join Date: Jan 2005 Location: Chilton, WI Posts: 8	I think it would be the same if not it would be made the same. How rusty are the lines and sending unit. I know I can't get the lines apart at the sending unit. Let me know please.

07-22-2005, 08:35 AM	#6
my72k20 Registered User Join Date: Dec 2004 Posts: 23	Last I looked they were in great shape. I will take a good look at the set up this weekend

07-22-2005, 05:36 PM	#8
Theront Registered User Join Date: Jan 2005 Location: Chilton, WI Posts: 8	Thanks for everyones help I broke down today and purchased a new sending unit, I am attempting to get the lines loose, I will come up with something to make it work. I am making a gas vapor or fog with the line as it is, it slowly collects on the frame and runs. I think serious safety concern. Thanks Theront

07-22-2005, 10:23 PM	#9
Theront Registered User Join Date: Jan 2005 Location: Chilton, WI Posts: 8	To ease the minds. I have fixed the truck, don't know how long the lines will last but they are not leaking at this time and the sending unit has been replaced. I might be interested in lines yet if they were reasonable. Preventative measure Theront



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.