Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
07-27-2005, 07:53 PM | #1 |
Registered User
Join Date: Jul 2003
Location: north of Phx AZ about 30 miles
Posts: 698
|
What center link to use for '67 conversion
I about have my '71 disk brake front end rebuilt for my '67. I would also like to put in power steering from a later model. My '67 has the stock power assist ram, and the '71 front end I got was a manual steering fron end. As best I recall I can use the '71 manual center link with a new power steering gear and the steering arm from the power steering box. Is that right?
As far as power steering gears go I think I can use '69-'72 boxes, are any of these boxes the close ratio boxes, or are they all the same? Also, should I use the master cylinder and/or proportioning valve from my '67, with power brakes or from the '71. I dont know if the '71 had power brakes or not, all I got was back to the M/C. Thanks, Andy.
__________________
Andy,Phx AZ '67 C-10 (Ahhh, done at last. Well there is that disk front end I want to put in and...) "23 C-Cab-sold '48 Ford 8N tractor(still working) '67 Scout(Now on the road) '70 MG B.-sold |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|