frame difference? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jeremy_5 · 08-03-2005, 03:01 AM

Are there any differences between a 67-72 frame and a 73-87 frame?

krue · 08-03-2005, 03:32 AM

Yeah, the later frame humps up under the cab more. To put a 67-72 cab on a later frame you either have to do a body lift (which is ok for a 4wd but silly for a 2wd) or channel the floor of the cab.

Jeremy_5 · 08-03-2005, 04:23 AM

thanks Krue. So all the cab mounts are in the same place on both frames?

This might be a little off topic but does anyone know if a bigger cab like a 2-ton cab, will fit on a 67-72 or 73-87 frame? I am not sure of the dimensions of the 2-ton cab. I don't know if it is wider or has different locations for the cab mounts. Any help would be appreciated.

krue · 08-03-2005, 05:35 AM

Don't quote me on the cab mounts. Mudder67 has a 73+ frame under his 4x4, maybe he can help you with the particulars.In 67-72 I'm pretty sure the bigger trucks have the same cab as the 1/2 tons, with a few mods (to make room for the bigger wheel wells, etc).

Mudder · 08-03-2005, 11:40 AM

If you'll look the mounts on the newer trucks go to the inside of the frame. Older trucks to the outside. In the same general area. They are also all different lengths (wheelbase).

08-03-2005, 03:01 AM	#1
Jeremy_5 Truck addict Join Date: Sep 2003 Location: Lincoln, California Posts: 497	frame difference? Are there any differences between a 67-72 frame and a 73-87 frame? __________________ 1956 Chevy Napco 1972 Cheyenne Super 1970 K20

08-03-2005, 03:32 AM	#2
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Yeah, the later frame humps up under the cab more. To put a 67-72 cab on a later frame you either have to do a body lift (which is ok for a 4wd but silly for a 2wd) or channel the floor of the cab. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

08-03-2005, 04:23 AM	#3
Jeremy_5 Truck addict Join Date: Sep 2003 Location: Lincoln, California Posts: 497	thanks Krue. So all the cab mounts are in the same place on both frames? This might be a little off topic but does anyone know if a bigger cab like a 2-ton cab, will fit on a 67-72 or 73-87 frame? I am not sure of the dimensions of the 2-ton cab. I don't know if it is wider or has different locations for the cab mounts. Any help would be appreciated. __________________ 1956 Chevy Napco 1972 Cheyenne Super 1970 K20

08-03-2005, 05:35 AM	#4
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Don't quote me on the cab mounts. Mudder67 has a 73+ frame under his 4x4, maybe he can help you with the particulars.In 67-72 I'm pretty sure the bigger trucks have the same cab as the 1/2 tons, with a few mods (to make room for the bigger wheel wells, etc). __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

08-03-2005, 11:40 AM	#5
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	If you'll look the mounts on the newer trucks go to the inside of the frame. Older trucks to the outside. In the same general area. They are also all different lengths (wheelbase).



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.