|
|
|
08-06-2005, 12:00 AM
|
#1 |
|
Tightwad
Join Date: Jun 2005
Location: Louisiana
Posts: 408
|
Need help
I have gotten a complete truck for parts , just not sure what i got , the cab is a 67 and the front cap is 69 or 70, it has disk brakes on the front but the brake master has no booster. Is that possible? i am wanting to use these spindles and stuff for the front so i can have disk brakes on my 68 . would a brake booster work with this? Or maybe the people never finshed the truck? any ideas? any thoughts would help!!!
Thanks, eric |
|
|
|
08-06-2005, 12:10 AM
|
#2 |
|
Registered User
Join Date: May 2001
Location: Benbrook, TX
Posts: 1,060
|
Post some photos of the truck.
Boosters can be installed with out much trouble. Good luck Matthew
__________________
69 swb stepside, rebuild and upgrade in progress |
|
|
|
|
08-06-2005, 12:18 AM
|
#3 |
|
Tightwad
Join Date: Jun 2005
Location: Louisiana
Posts: 408
|
The truck that i had got for parts had all this on it without brake booster, just master is all and disk brakes, i guess what i mean is what year did they start putting disks and did they use brake booster when they started, next question is could i put all this on my 68 and use a brake booster with those callipers?
|
|
|
|
|
08-06-2005, 12:21 AM
|
#4 |
|
Senior Member
Join Date: Sep 2004
Location: CANADA
Posts: 1,681
|
71 was the first year for disc brakes.Not all of the trucks with disc brakes had power brakes that was an option.I have a 71 here with no booster and it was built that way
|
|
|
|
|
08-07-2005, 05:42 AM
|
#5 |
|
Registered User
Join Date: Jul 2002
Location: Memphis, Tn
Posts: 194
|
This is an easy, straight-forward swap. I bought complete frontend, spindles,rotors,calipers,upper and lower control arms, center link, pitman arm and rear end at Super Chevy Weekend, for $125.00. Only drawback to installing on my '68 was the 6 bolt lug pattern. (Two spares) I bought some stronger-than-stock 5 bolt axles from Summit for around $200.00. This is also an easy swap. Another benefit of this swap is a greater selection of wheels. Good luck and keep on truckin'..................Jerry
__________________
'68 c-10 long wheelbase fleetside, been in family since new, originally 250 3 speed Now (389) 350 .060 over 3.75 stroke,Edelbrock Performer RPM 70cc heads and Intake 600 cfm Edelbrock,Small Comp Cams retro-roller cam and roller rockers,9:1 cr, headers, HEI,Old Air a/c, 72 power disc brakes w/stainless lines, 3.42 gear,T-56 6-speed, original paint(what's left of it). Dakota Digital Dash |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
