Parting out '76 C20 Camper Special - The 1947 - Present Chevrolet & GMC Truck Message Board Network

T_Dilley · 08-19-2005, 09:11 AM

Just like the title says. I am parting a 1976 GMC C20 Camper Special.

Tilt Column W/ Cruise..HAVE key. $80
14 bolt rear That I believe to be a 4:10 Posi $150
Dual Tank Setup $100 obo
All Interior parts & Emblems..Will Price accordingly.
No Motor/Trans...Had 454/TH400..
Have Mounts and a Few brackets off Motor.
Exhaust Manifolds $65
2 BBC Flywheels $20 per

Feel free to ask about parts even if they aren't listed.
Inquire for pictures.

mhicks · 08-19-2005, 09:47 AM

Do you have a knob and shaft for the headlight switch?

**ScottH** · 08-19-2005, 11:05 AM

Would you have a good fan shroud from the 454?
Thanks.

T_Dilley · 08-19-2005, 05:14 PM

Do not have shroud. Sorry. Will get pic of Headlight Switch.

*aquik72gmc350* · 08-20-2005, 09:59 PM

I need the Brackets that attach the Upper Control Arms to the front crossmember. They are held on by 4 Rivets, and have 2 screws to attach to the the control Arm. There is a left and right side. I need them to be in pretty nice shape, don't have to be perfect but I dont want them damaged by removing the rivets.

lamar · 08-21-2005, 05:19 PM

How about the seat belts? What color and how much to ship to 30016? Thanks Lamar.

rich-white · 08-21-2005, 05:40 PM

dash pad what color?

jhama78 · 08-21-2005, 06:03 PM

need a pass side fender... ya got one?

T_Dilley · 08-22-2005, 03:57 AM

Sorry about the delay fellas..I will get all this taken care of tomorrow. Will get pics & prices.

Jhama..Where are you located. I have a few front clips scattered around. Should be able to find a decent fender. You wanting driver quality? Or damn near perfect?

jhama78 · 08-22-2005, 11:59 AM

Im in VA near richmond. Im looking for a passenger side fender that doesnt have the bottom edge behind the front tire rotten off.... It doesnt have to have any trim on it either.. the truck its going on is my 77 k20 custom deluxe... its not show quality at all just trying to get all decenct panels on it before I shoot it this winter....

T_Dilley · 08-22-2005, 06:15 PM

Jhama..All my fenders are pretty much shot.

Rich_White..Dash pad is gone.

M Hicks..Here's your pics, the knob shows a little wear.

mingoman · 08-24-2005, 12:46 PM

454 grill emblem any good?

77gmcjoe · 08-24-2005, 08:41 PM

I'd really like to find a decent (or at least re-chromable) set of "Sierra Classic 25" front fender emblems. Can you help me out?

rays68 · 08-25-2005, 03:00 AM

Do you have a rear sway bar if so how much and what size.

T_Dilley · 08-25-2005, 06:15 PM

Sold the truck as a whole locally. Sorry guys.

08-19-2005, 09:11 AM	#1
T_Dilley Can't tell me nothin' Join Date: Nov 2004 Location: Pana, IL Posts: 250	Parting out '76 C20 Camper Special Just like the title says. I am parting a 1976 GMC C20 Camper Special. Tilt Column W/ Cruise..HAVE key. $80 14 bolt rear That I believe to be a 4:10 Posi $150 Dual Tank Setup $100 obo All Interior parts & Emblems..Will Price accordingly. No Motor/Trans...Had 454/TH400.. Have Mounts and a Few brackets off Motor. Exhaust Manifolds $65 2 BBC Flywheels $20 per Feel free to ask about parts even if they aren't listed. Inquire for pictures. Last edited by T_Dilley; 08-19-2005 at 09:12 AM.

08-21-2005, 05:19 PM	#6
lamar Registered User Join Date: Apr 2004 Location: Covington,Ga Posts: 453	How about the seat belts? What color and how much to ship to 30016? Thanks Lamar. __________________ 72 C-10

08-22-2005, 06:15 PM	#11
T_Dilley Can't tell me nothin' Join Date: Nov 2004 Location: Pana, IL Posts: 250	Jhama..All my fenders are pretty much shot. Rich_White..Dash pad is gone. M Hicks..Here's your pics, the knob shows a little wear. Attached Images

08-24-2005, 12:46 PM	#12
mingoman Registered User Join Date: May 2004 Location: Miss Co Arkansas Posts: 679	454 grill emblem any good? __________________ 76/77/78 Cheyenne 1997 K3500 454 soon to be 496

08-24-2005, 08:41 PM	#13
77gmcjoe What do we get for $10? Join Date: Oct 2004 Location: Beardstown, Illinois Posts: 340	I'd really like to find a decent (or at least re-chromable) set of "Sierra Classic 25" front fender emblems. Can you help me out? __________________ 1977 GMC K25 400/400/205 1989 Chevy Suburban R1500 350/700R4 (work beater) 1994 Chevy K3500 dually 454/4L80 1996 Corvette LT4 350/ZF 6 speed 2000 Bonneville SSEI Supercharged 3.8 Liter V6 1966 Chevelle 2 door sedan (Needs major repair )

08-19-2005, 09:47 AM	#2
mhicks Registered User Join Date: Jan 2004 Location: Weatherford,Tx Posts: 747	Do you have a knob and shaft for the headlight switch?

08-19-2005, 11:05 AM	#3
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Would you have a good fan shroud from the 454? Thanks.

08-19-2005, 05:14 PM	#4
T_Dilley Can't tell me nothin' Join Date: Nov 2004 Location: Pana, IL Posts: 250	Do not have shroud. Sorry. Will get pic of Headlight Switch.

08-20-2005, 09:59 PM	#5
aquik72gmc350 Account Suspended Join Date: Aug 2005 Location: Ca Posts: 81	I need the Brackets that attach the Upper Control Arms to the front crossmember. They are held on by 4 Rivets, and have 2 screws to attach to the the control Arm. There is a left and right side. I need them to be in pretty nice shape, don't have to be perfect but I dont want them damaged by removing the rivets.

08-21-2005, 05:40 PM	#7
rich-white Registered User Join Date: Feb 2004 Location: st. Louis Missouri Posts: 414	dash pad what color?

08-21-2005, 06:03 PM	#8
jhama78 Registered User Join Date: Aug 2004 Location: Eastern Shore VA Posts: 366	need a pass side fender... ya got one?

08-22-2005, 03:57 AM	#9
T_Dilley Can't tell me nothin' Join Date: Nov 2004 Location: Pana, IL Posts: 250	Sorry about the delay fellas..I will get all this taken care of tomorrow. Will get pics & prices. Jhama..Where are you located. I have a few front clips scattered around. Should be able to find a decent fender. You wanting driver quality? Or damn near perfect?

08-22-2005, 11:59 AM	#10
jhama78 Registered User Join Date: Aug 2004 Location: Eastern Shore VA Posts: 366	Im in VA near richmond. Im looking for a passenger side fender that doesnt have the bottom edge behind the front tire rotten off.... It doesnt have to have any trim on it either.. the truck its going on is my 77 k20 custom deluxe... its not show quality at all just trying to get all decenct panels on it before I shoot it this winter....

08-25-2005, 03:00 AM	#14
rays68 Registered User Join Date: Dec 2002 Location: Redondo Beach CA Posts: 131	Do you have a rear sway bar if so how much and what size.

08-25-2005, 06:15 PM	#15
T_Dilley Can't tell me nothin' Join Date: Nov 2004 Location: Pana, IL Posts: 250	Sold the truck as a whole locally. Sorry guys.



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.