|
|
|
07-01-2002, 01:09 AM
|
#1 |
|
Registered User
Join Date: Jun 2002
Location: Winnipeg, MB, Canada
Posts: 9
|
Bigger sway bar
Hi; Have 70 c/10 with no swaybar. I found one in the wreckers,it's about 7/8 in. OD, I bought some good after market bushings,but they 1 1/16 ID. My question is, is there a bigger bar that will fit this truck?
|
|
|
|
07-01-2002, 08:31 AM
|
#2 |
|
Registered User
Join Date: May 2000
Location: Frankfort, Kentucky, USA
Posts: 2,163
|
On 3/4 trucks there are 1 1/16th bars. On some other bigger trucks, maybe burbs too, there were 1 1/4" bars, which is what i'm looking for. You can buy them new for about 150 bucks.
__________________
'69 CST Short fleetside Lowered, 400 small block, 700R4, 4 wheel disc brakes, front sway bar & rear camaro sway bar (in progress) '87 V10 4x4 Short Fleetside Quad Suspension and Dual Tanks |
|
|
|
|
07-01-2002, 01:26 PM
|
#3 |
|
Registered User
Join Date: Jun 2002
Location: Winnipeg, MB, Canada
Posts: 9
|
Hey, Low69CST, LOVE your truck. About the 3/4 ton swaybar, do you know what years would fit my 70? What's the name of the yellow on your truck? Have 70 GTO 400R/A lV 4spd , that's not a perfect numbers car and I'm considering a yellow color for it , any ideas?
|
|
|
|
|
07-01-2002, 02:36 PM
|
#4 |
|
Registered User
Join Date: May 2000
Location: Frankfort, Kentucky, USA
Posts: 2,163
|
First of all, the truck on the homepage of my website isn't my truck. My truck is unfinished. I put that picture there for an example what I look for, and its a good lookin truck. If you click on the My 1969 CST link then you'll see some progress pictures of my truck. Where I started out at and where I'm at now. I also have a page about these front sway bars. I'm told any truck from 67 - 87 will work. I don't know if they have the same frame brackets our trucks use, but i'm definately told the same bar is used.
__________________
'69 CST Short fleetside Lowered, 400 small block, 700R4, 4 wheel disc brakes, front sway bar & rear camaro sway bar (in progress) '87 V10 4x4 Short Fleetside Quad Suspension and Dual Tanks |
|
|
|
|
07-01-2002, 05:04 PM
|
#5 |
|
68cst_ss490
Join Date: May 2001
Location: edmonton,canada
Posts: 1,363
|
I took the sway bar out of the 79 pickup I got the front x member out of. It will mount perfectly in the holes for the front brace that is aleays bent
 HAPPY CANADA DAY
__________________
Dean edmonton,canada a winter wonderland 2005 Chevrolet Avalanche LT cold air intake, performance exhaust, Comp cams cam, jba shorty ceramic headers. http://www.cardomain.com/ride/3090973 |
|
|
|
|
07-01-2002, 05:48 PM
|
#6 |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,064
|
My crossmember is the stock 68 & I used a 76 1/2 ton model 1 1/16 dia. sway bar & purchased urethane bushings from Summit. It made a big difference as my truck had no front bar. As for the frame mounts, since I lowered mine I just attached the bar ends to the lower a-arms @ the fact drilled holes, then centered the bushing & brackets on the sway bar @ the frame rails, center punched the holes in the frame, then drilled the holes out & bolted it all together. Has worked daily now for 2+ yrs & the urethane bushings I bought are greaseable to limit the squeaks.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
