one awesome "byrd"

[hilljob26]

ok guys,i just had to say this,i got a cluster from byrd,needless to say when i got it in the truck,i was super duper staisfied,well,i waited till dark to see how they looked and the numbers could hardly be seen,well,he sent me a different lense(for free)and i swapped em out,and man i feel like i have guages out of a 2004 chevy instead of a 72,my point is,is that this guy is great,i just wanted to take a second to make sure all of you are aware of his work,thanx again randy...mike

[alf1096]

post a pic

[byrd]

Originally Posted by alf1096

post a pic

The first pic is a white cluster just like hilljobs and the second is a new silver faced one I just finished up for a guy. Randy

[tomatocity]

byrd, what lens' do you use for your rebuilds? I have heard more than one comment about the aftermarket lens'. How many companies make the aftermarket lens' and are there any we should stay away from (in your opinion)? You do have the most experience with these clusters and I am sure most of us trust your opionion.

[byrd]

Originally Posted by tomatocity

byrd, what lens' do you use for your rebuilds? I have heard more than one comment about the aftermarket lens'. How many companies make the aftermarket lens' and are there any we should stay away from (in your opinion)? You do have the most experience with these clusters and I am sure most of us trust your opionion.

Thanks for the compliment, but I would not say that I have the most experience, as they is always someone who's got a trick you don't know
I get this particular lens from ED @ Mothertruckers, Yes some are a little off,but the human factor makes that happen. I don't think they look bad
unless you are doing an original show truck(tralier queen), I have gotten six of these lenses and if you look at the white one really close you can see the oil pressure is not totally perfect, and empty on the fuel is a little off, the tach # aren't perfect. Both the lens and the bezel are aftermarket and from two different manufactors, so they both can attribute to this trouble with things being out of line, the white tach cluster has a cheaper bezel than the silver one. The silver cluster has the same lens as the white one,but it has a much, much nicer bezel on it that is Made in the USA and costs nearly twice as much(get what you pay for) and the lens in it looks really good to me, so I guess the bezel and lens are equally important in making the cluster look almost perfect. The lens in made or from Brothers and so is the Made in USA bezel, by JTM (I think) the lens that looks more like stock(not pictured) is from counterpart, and the cheaper bezel is from them as well. Randy

[hilljob26]

that silver is kinda cool

[byrd]

Yeah it is,but I think black needles would maybe look better,but no way that you could see the temp,oil,or ammetter at night. Pics of the silver cluster really do not do it justice, I will get some better pics over the weekend before it goes on e bay. Randy

[1badcad]

Can u post some night time pics? I need a new cluster for my truck.

[1badcad]

Byrd can u pm me? i dont have old cluster to send to you. I need a whole new one. I like the silver one. I wanted to get a price

[matthufham]

1 has a tach in it... they both look great.

[hilljob26]

i tried taking a pic at night,but i couldn't get it to come out right,i have a cheap camera,but its either too dark,or its all lite up,but trust me,these things actually glow,its sweet

[70c10]

Randy, do you have to take the needles off the gas and speedo gauges to get the overlays on?. They look great!

[byrd]

Originally Posted by 70c10

Randy, do you have to take the needles off the gas and speedo gauges to get the overlays on?. They look great!

No, they are cut to slip over . The overlays are nice and they like everything in this world has some variation to them I have gotten some that were not cut right or cut too short, and Durange has always replaced any part that gave me trouble. Randy

[67chevemall]

WTB!!!Anybody have a tach and/or the wiring mat on the very back???

[byrd]

I just came back in after trying to get pics of the night time clusters, and I wasn't able to get them to show up I have to agree with hilljob( Mike) as to the #'s looking as if they are glowing and if you add white leds to the silver it really makes a cool change of look and the #'s glow much brighter, and the stock 194 bulbs really aren't bright enough imo. The white one with the red and blue leds looked really cool and would be great in a truck with that color interior, Randy

[FRENCHBLUE72]

Heyt byrd do you have any set-up on e-bay right now I have been thinking about getting a new set-up for my blazer but not really sure on which way I would like to go..

[byrd]

http://search.ebay.com/_W0QQfgtpZ1QQ...oolplacetoshop

The link is to the two pictured in this thread for sale this week. I resally need to get better pics of the clusters,but I was pressed for time... Randy

[shifty]

Don't forget to visit the "reviews" forum here and post a word or two about your experience!!

[1badcad]

Byrd i still need a cluster, but i really want to see some night pics, can u help with this?

[kbs71]

Byrd,
In your e-bay ads you say on a couple of those units that you replaced the resistor on the temp gauge. what resistor did you use and why?

[byrd]

Originally Posted by kbs71

Byrd,
In your e-bay ads you say on a couple of those units that you replaced the resistor on the temp gauge. what resistor did you use and why?

Well I had to replace the resistor on the temp guages often as their are not that many that work when I get them I use fixagauge.com to get the resistors) I have found that even though some of the temp gauges still works, but it's inaccurate and that's not good, so it a good piece of mind for the buyer and myself. The new resistors make the gauge operate correctly,accurately like they should.....Randy

[byrd]

Originally Posted by 1badcad

Byrd i still need a cluster, but i really want to see some night pics, can u help with this?

Badcad,
I can't get them to turn out(cheap camera) I am not going to be able to get them. All I can say is that like all my clusters I build, they come with a 100% money back guarantee, so if for any reason you are not happy with one you buy from me just send it back undamagd and in the condition you received it in, and as soon as I get it back I will promtly refund your money NO questions asked!! Randy

[70c10]

You can't ask for anything more than that!

[hilljob26]

thats what ive been trying to tell evryone,he really makes it buyer friendly,HE ROCKS

[byrd]

Originally Posted by hilljob26

thats what ive been trying to tell evryone,he really makes it buyer friendly,HE ROCKS

Thanks Mike you rock as well, I can't wait to get the rear discs on my truck, but between working six days a week and building these clusters, I haven't had the time to even look it all over But being busy is not a bad thing, just no time to work on my truck. You jinxed me anyway , now I have a summer cold after reading your thread about the billet knobs, first summer cold in over 7 years, ..Randy