Need xfer case length measurements - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gregbr · 09-11-2005, 04:25 AM

Can somebody tell me the overall length of a np205 & np208. I'm comparing to my 203 the PO put in my 67 K10. Greg

gregbr · 09-24-2005, 06:04 AM

ttt

Americanrider · 09-24-2005, 01:11 PM

I have 2 NP 205's one auto and one 4 spd setup, are you looking for total with adaptors or without?

gregbr · 09-24-2005, 04:32 PM

Transfer case without adaptors would be good. Thanks.

jec · 09-24-2005, 10:09 PM

American Rider - I would like to know overall length of automatic TH400/adaptor/NP205. I am considering swapping out my SM465 set-up.

gator2511 · 09-25-2005, 08:46 AM

TH400 is 24 3/4" Adapter is 4" and the np205 is 12" to 13" from the front of the case to the center of the output yoke. Total would be about 40 3/4" to 41 3/4". I'm down in the back right now or I would crawl under the truck and measure mine as it sits under the truck. At least this will give you an idea of how long this combo is. The adapter should include a new input gear for the transfer case with a 32 spline input to match the th400 tranny.(machine shop work). You need to use the 2wd version of the th400 with the short tailshaft.

Americanrider · 09-25-2005, 01:24 PM

the 4sp 205 I have is 13 inches, the TH350/205 is 12 inches. The difference being the type of rear yoke that is installed.

09-11-2005, 04:25 AM	#1
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	Need xfer case length measurements Can somebody tell me the overall length of a np205 & np208. I'm comparing to my 203 the PO put in my 67 K10. Greg __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

09-24-2005, 06:04 AM	#2
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	ttt __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

09-24-2005, 04:32 PM	#4
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	Transfer case without adaptors would be good. Thanks. __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

09-24-2005, 01:11 PM	#3
Americanrider Registered User Join Date: Dec 2004 Location: NW, WA. Posts: 1,421	I have 2 NP 205's one auto and one 4 spd setup, are you looking for total with adaptors or without?

09-24-2005, 10:09 PM	#5
jec Registered User Join Date: May 2000 Location: Middletown, Ohio Posts: 131	American Rider - I would like to know overall length of automatic TH400/adaptor/NP205. I am considering swapping out my SM465 set-up.

09-25-2005, 08:46 AM	#6
gator2511 Registered User Join Date: Mar 2005 Location: tampa florida Posts: 776	TH400 is 24 3/4" Adapter is 4" and the np205 is 12" to 13" from the front of the case to the center of the output yoke. Total would be about 40 3/4" to 41 3/4". I'm down in the back right now or I would crawl under the truck and measure mine as it sits under the truck. At least this will give you an idea of how long this combo is. The adapter should include a new input gear for the transfer case with a 32 spline input to match the th400 tranny.(machine shop work). You need to use the 2wd version of the th400 with the short tailshaft.

09-25-2005, 01:24 PM	#7
Americanrider Registered User Join Date: Dec 2004 Location: NW, WA. Posts: 1,421	the 4sp 205 I have is 13 inches, the TH350/205 is 12 inches. The difference being the type of rear yoke that is installed.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.