Help I need part #'s for shocks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fastbagged68 · 09-15-2005, 01:10 PM

I need part numbers for shocks on 69 fleet lowered 5" front and 6" rear. Front has 2.5" drop spindles and 2.5"springs, Rear is 4"spring 2 inch block. I need to go to my local parts store and get them. Our parts store guys are not the brightest, so I need the part #'s. Any Help!

dwcsr · 09-15-2005, 08:04 PM

Your going to have to do some research, measure the ride height from shock bolt to shock bolt. Add 2.5 -3 inches to that and subtract 2.5 - 3 inches from the same number so you have the minimum and maximum travel as well as the center range. Go over to http://www.monroe.com/catalog_lookup...iscappinfo.asp and match up the dimensions and the mountings.

09-15-2005, 01:10 PM	#1
fastbagged68 Registered User Join Date: Jun 2002 Location: Tri Valley California Posts: 792	Help I need part #'s for shocks I need part numbers for shocks on 69 fleet lowered 5" front and 6" rear. Front has 2.5" drop spindles and 2.5"springs, Rear is 4"spring 2 inch block. I need to go to my local parts store and get them. Our parts store guys are not the brightest, so I need the part #'s. Any Help!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

09-15-2005, 08:04 PM	#2
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,134	Your going to have to do some research, measure the ride height from shock bolt to shock bolt. Add 2.5 -3 inches to that and subtract 2.5 - 3 inches from the same number so you have the minimum and maximum travel as well as the center range. Go over to http://www.monroe.com/catalog_lookup...iscappinfo.asp and match up the dimensions and the mountings.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.