|
|
|
09-15-2005, 09:54 PM
|
#1 |
|
Registered User
Join Date: Nov 2004
Location: Satsuma, AL
Posts: 72
|
Shifter "flop"
Still have the "three on the tree" shifter & wanna keep it- problem is, it flops about two inches lower than I like it & is still sloppy, even after I shimmed it with the nylon washers I mentioned before from the Peterbilt dealership. Is there any other way to adjust the shifter UP to get off of my right knee? Thanks, Bud
|
|
|
|
09-15-2005, 10:02 PM
|
#2 |
|
Registered User
Join Date: Jul 2004
Location: Shakopee Minnesota
Posts: 174
|
Heat up the shift lever and bend it
|
|
|
|
|
09-15-2005, 10:19 PM
|
#3 | |
|
10/30/19
Join Date: Aug 2004
Location: ottawa kansas
Posts: 5,245
|
Quote:
|
|
|
|
|
|
09-25-2005, 12:25 AM
|
#4 |
|
Registered User
Join Date: Nov 2004
Location: Satsuma, AL
Posts: 72
|
I'll check on the ccw rotation bit...unless it makes my steering wheel off-center? Don't want to heat anything up with a torch- it'll mess up the chrome!
|
|
|
|
|
09-25-2005, 01:00 AM
|
#5 |
|
Sisyphus was my mentor!
 
Join Date: Sep 2002
Location: Carleton Place, Ontario CANADA
Posts: 984
|
The shifter in my 67 was insanely floppy. It ended up being the bushings for where the levers on the side of the transmission meet the rods comming off the column. I ordered up gm pn# 3975132 times 4 & it is wayyy better now. Just my 2 cents.
__________________
passthebuck  #5642 -TWO 1967 GMC 910's. One with L6/3-on-the tree and the other with 355 w/435hp & a 700r4. -a 2013 Honda Civic as my "sensible" car |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
