Bucket seat track disassembly? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

burbman69 · 09-30-2005, 09:27 PM

Do the bucket seat sliders come apart for service? I am cleaning and painting the seat track and I can't seem to get the sliders apart. anyone know how?
thanks

86swb · 09-30-2005, 10:35 PM

ttt

86swb · 10-01-2005, 09:25 AM

Sorry, I guess no one really knows. If they did you would have gotton an answer. You do not get ignored on here. If someone knows an answer to a question you ask they will answer you. Hope you here from someone who might know. I do not know the answer to your question. Maby they do not come apart. If still no answer, just paint and grease. That is what I would do.

burbman69 · 10-01-2005, 10:11 AM

Thanks for your reply and I always appreciate the input from the board. I know that I am not being ignored. Iam down to two choices Dynamite or leave it alone and grease. maybe ill leave it alone!

Thanks

junkyardjohn · 10-01-2005, 11:34 AM

I USUALLY JUST SPRAY THEM OUT GOOD WITH CARB. CLEANER OR BRAKE CLEANER & RELUBE THEM WITH SOME AROSAL WHITE LITHIUM GREASE AFTER I PIANT THEM. IT'S BEEN AWHILE , BUT IT SEEMS TO ME THAT THERE IS A COUPLE OF RIVITS HOLDING THEM TOGETHER. SORRY ABOUT NOT RESPONDING SOONER, BUT I TRY NOT TO SEEM LIKE A KNOW IT ALL, & GIVE OTHER PEOPLE A CHANCE TO ANSWER. (UNLESS THEY ARE HANDING OUT SOME BUNK ADVICE.

JOHN

burbman69 · 10-01-2005, 11:50 AM

Thanks for your reply John. It looks like the rivets would have to be ground off to get the rollers out as they are not the POP rivet type. I think I will take your advice and clean paint and relube. Thanks again for the reply!

farside847 · 10-03-2005, 12:05 PM

My sliders were from a 69 style bucket seat, they are held together by rivits that would need to be drilled out to take apart. So, I kept mine in one piece, cleaned them up, and lubed it up good with grease.

09-30-2005, 09:27 PM	#1
burbman69 Registered User Join Date: Feb 2005 Location: MOORESVILLE,NC Posts: 8	Bucket seat track disassembly? Do the bucket seat sliders come apart for service? I am cleaning and painting the seat track and I can't seem to get the sliders apart. anyone know how? thanks __________________ If it's worth doing it's worth overdoing! 1969 1/2 ton Suburban 1970 C/20 NEW PROJECT!

09-30-2005, 10:35 PM	#2
86swb Born a Chevy Man Join Date: Apr 2005 Location: Navarre, Florida Posts: 10,221	ttt __________________ John or 86 (Viet Nam combat Vet-BIG RED ONE) '65-'66 1986 Chevy SWB Silverado 1984 Chevy Longbed Silverado New Kia Sportage (Wife's car and she loves it) CHEVY, American made w/pride! If you can read this, YOU NEED TO THANK A TEACHER! If you can read this in ENGLISH, PLEASE THANK A SOLDIER! GOD BLESS AMERICA AND BLESS OUR FIGHTING TROOPS

10-01-2005, 09:25 AM	#3
86swb Born a Chevy Man Join Date: Apr 2005 Location: Navarre, Florida Posts: 10,221	Sorry, I guess no one really knows. If they did you would have gotton an answer. You do not get ignored on here. If someone knows an answer to a question you ask they will answer you. Hope you here from someone who might know. I do not know the answer to your question. Maby they do not come apart. If still no answer, just paint and grease. That is what I would do. __________________ John or 86 (Viet Nam combat Vet-BIG RED ONE) '65-'66 1986 Chevy SWB Silverado 1984 Chevy Longbed Silverado New Kia Sportage (Wife's car and she loves it) CHEVY, American made w/pride! If you can read this, YOU NEED TO THANK A TEACHER! If you can read this in ENGLISH, PLEASE THANK A SOLDIER! GOD BLESS AMERICA AND BLESS OUR FIGHTING TROOPS Last edited by 86swb; 10-01-2005 at 09:26 AM.

10-01-2005, 10:11 AM	#4
burbman69 Registered User Join Date: Feb 2005 Location: MOORESVILLE,NC Posts: 8	Thanks for your reply and I always appreciate the input from the board. I know that I am not being ignored. Iam down to two choices Dynamite or leave it alone and grease. maybe ill leave it alone! Thanks __________________ If it's worth doing it's worth overdoing! 1969 1/2 ton Suburban 1970 C/20 NEW PROJECT!

10-01-2005, 11:34 AM	#5
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,425	I USUALLY JUST SPRAY THEM OUT GOOD WITH CARB. CLEANER OR BRAKE CLEANER & RELUBE THEM WITH SOME AROSAL WHITE LITHIUM GREASE AFTER I PIANT THEM. IT'S BEEN AWHILE , BUT IT SEEMS TO ME THAT THERE IS A COUPLE OF RIVITS HOLDING THEM TOGETHER. SORRY ABOUT NOT RESPONDING SOONER, BUT I TRY NOT TO SEEM LIKE A KNOW IT ALL, & GIVE OTHER PEOPLE A CHANCE TO ANSWER. (UNLESS THEY ARE HANDING OUT SOME BUNK ADVICE. JOHN __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

10-01-2005, 11:50 AM	#6
burbman69 Registered User Join Date: Feb 2005 Location: MOORESVILLE,NC Posts: 8	Thanks for your reply John. It looks like the rivets would have to be ground off to get the rollers out as they are not the POP rivet type. I think I will take your advice and clean paint and relube. Thanks again for the reply! __________________ If it's worth doing it's worth overdoing! 1969 1/2 ton Suburban 1970 C/20 NEW PROJECT!

10-03-2005, 12:05 PM	#7
farside847 Registered User Join Date: Feb 2005 Location: Bay Area, California Posts: 995	My sliders were from a 69 style bucket seat, they are held together by rivits that would need to be drilled out to take apart. So, I kept mine in one piece, cleaned them up, and lubed it up good with grease. __________________ 1971 Chevy C10 Shortbed Stepside, 307v8 3-on-the-tree

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.