Have to part my project - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chevyguy111786 · 10-11-2005, 11:48 AM

My parts truck was towed and crushed against my will, leaving me with a decision to continue the build and put more money into it or cut my losses and sell what i have and try to recoupe a portion of it and put that money into my 78. That's what i've decided to do. Please reply to this thread so that i have a good record of who asked for what first. Everything is OBO and needs go to as soon as i can get it sold. Some things need to go sooner than others. I have up for sale:

1 LWB Frame w/ Front suspension w/ 6 Lug, no rearend or trailing arms. GONE

1 SWB Frame w/ Front suspension w/ 6 Lug, no rearend or trailing arms GONE

1 1970 A/C Cab very straight some rust in the rocker panels, has clean title in my name. has good front and back glass. $400

Both Doors for 1970 cab good glass $100

Set of 1970 SWB Fleet Bedsides, need body work, have surface rust $200

Set of 1970 SWB Step Sides, decent will need some body work. $200

Set of 1970 Front fenders. Driver is near perfect with trim holes, Passenger is near perfect with trim holes with the exception of a good sized dent in the front top corner. $150

1970 Hood Near perfect condition $100

1970 Grille a good daily driver $50

1970 Core Support $50

1970 inner fender $75

1969 3/4 Ton or 1 Ton Rear-end. has low gears and NEW brakes. took a while to get the brakes for this rear-end. Comes with Coil springs and Trailing arms GONE

Vintage Air A/C Unit used for maybe 2 months. BLOWS COLD! and BLOWS HOT! $1000

Most items are negotiable. The Frames have to go make an offer, if not sold soon the frames will go to scrap for scrap money. Thank you. I will reply as often as possible. Work schedule has opened up, mostly home or close to home. will work with your schedule, would rather sell local but will ship if needed at buyers expense. thanks guys!

if the price changed and you had already inquired...if the price is higher than original i will hold my word on the original, all new inquires are as listed but all parts are OBO.

chevyguy_72 · 10-11-2005, 12:16 PM

is the a/c unit for a a/c cab or non a/c cab? Might be interested
Thanks

Chevyguy111786 · 10-11-2005, 12:40 PM

it is for an A/C cab. it works perfect and i have ALL the parts. it did not come with the control panel like some do, it hooks up to the factory A/C controls, which i also have and iwll include it.

70chevyfreak · 10-11-2005, 01:28 PM

PM sent

bean · 10-11-2005, 01:47 PM

i'd be interested in that core support if it's straight. I'm just in fort worth.

Chevyguy111786 · 10-11-2005, 02:18 PM

70chevyfreak- PM sent

Bean- you are 2nd in line for the core support. it is near perfect..no rust if any and very straight

671blazer · 10-11-2005, 02:42 PM

interested in the doors, and inner fenders. any idea how much to ship to CA 94545.
any pictures?

tom71 · 10-11-2005, 03:50 PM

interested in the bed sides can i see pics and can you shippem ? im in cali 92106 ?

SCOTI · 10-11-2005, 10:29 PM

Would you be around this week to let someone have a peek? I'm interested in the Vintage Air kit & possibly more.... Pm me w/your schedule.

Primered_69 · 10-11-2005, 11:19 PM

ANy pictures of the grille? I'm interested.

tomatocity · 10-12-2005, 01:59 AM

2nd's on the grill.

Chevyguy111786 · 10-14-2005, 06:17 PM

Finally got pics for you guys. due to the small space some pics aren't great and will be able to get better ones upon request.

Chevyguy111786 · 10-14-2005, 06:18 PM

more pics

Chevyguy111786 · 10-14-2005, 06:19 PM

and yet more pics

Chevyguy111786 · 10-12-2005, 12:23 AM

i'll get pictures tomorrow. My schedule this week is Wed. i'll be here Thursday i have work and class. So far i will be here friday and i will be here sunday. so let me know what you have and when you wanna take a peek. i'll get all pictures tomorrow and post them

Chevyguy111786 · 10-12-2005, 12:24 AM

as for shipping the larger items. i'm open to it but do not know who i would ship it through. other than building a crate and calling a freight company.

Chevyguy111786 · 10-14-2005, 06:28 PM

sorry for the bad pics...some items have been added or changed so check the first post again.

Chevyguy111786 · 10-16-2005, 02:20 PM

Josh....or other moderators. A page came up saying i must be a supporter to sell. I thought i was but in the many board up grades understand if some information was lost. I tried to go to the page listed but it said it was unavailable. How do i again become a subscriber or supporter so i can sell these parts. or do i just need to go to evil-bay. just tryin to recoupe my investment and put it back in my 78 so i can sell it so i can in turn move to arkansas...lol...just makin it to spend it i guess. let me konw.

a28doc · 10-16-2005, 04:41 PM

Quote:

Originally Posted by Chevyguy111786

Josh....or other moderators. A page came up saying i must be a supporter to sell. I thought i was but in the many board up grades understand if some information was lost. I tried to go to the page listed but it said it was unavailable. How do i again become a subscriber or supporter so i can sell these parts. or do i just need to go to evil-bay. just tryin to recoupe my investment and put it back in my 78 so i can sell it so i can in turn move to arkansas...lol...just makin it to spend it i guess. let me konw.

I posted your quote for Josh to answer to as I dont have access to that info so when he answers Ill answer you
Doc

Chevyguy111786 · 10-16-2005, 05:29 PM

thank you very much. really all i need to know is how to become a supporter or how much to donate and how to donate.

***Josh*** · 10-17-2005, 01:17 AM

This thread has all the required info.

Josh

tomatocity · 10-17-2005, 12:45 PM

Quote:

Originally Posted by Josh

This thread has all the required info. Josh

Josh I know you are a busy person but the member just wants to become a supporter of you and the board. If you are referring to the link one of the other members has on his signature "SUPPORT OUR BOARD" it does not work. Please make an Easy Button (like Staples) so we can access the link to donate to the board. Thanks.

10-11-2005, 11:48 AM	#1
Chevyguy111786 Registered User Join Date: Apr 2003 Location: Garland, Texas Posts: 1,127	Have to part my project My parts truck was towed and crushed against my will, leaving me with a decision to continue the build and put more money into it or cut my losses and sell what i have and try to recoupe a portion of it and put that money into my 78. That's what i've decided to do. Please reply to this thread so that i have a good record of who asked for what first. Everything is OBO and needs go to as soon as i can get it sold. Some things need to go sooner than others. I have up for sale: 1 LWB Frame w/ Front suspension w/ 6 Lug, no rearend or trailing arms. GONE 1 SWB Frame w/ Front suspension w/ 6 Lug, no rearend or trailing arms GONE 1 1970 A/C Cab very straight some rust in the rocker panels, has clean title in my name. has good front and back glass. $400 Both Doors for 1970 cab good glass $100 Set of 1970 SWB Fleet Bedsides, need body work, have surface rust $200 Set of 1970 SWB Step Sides, decent will need some body work. $200 Set of 1970 Front fenders. Driver is near perfect with trim holes, Passenger is near perfect with trim holes with the exception of a good sized dent in the front top corner. $150 1970 Hood Near perfect condition $100 1970 Grille a good daily driver $50 1970 Core Support $50 1970 inner fender $75 1969 3/4 Ton or 1 Ton Rear-end. has low gears and NEW brakes. took a while to get the brakes for this rear-end. Comes with Coil springs and Trailing arms GONE Vintage Air A/C Unit used for maybe 2 months. BLOWS COLD! and BLOWS HOT! $1000 Most items are negotiable. The Frames have to go make an offer, if not sold soon the frames will go to scrap for scrap money. Thank you. I will reply as often as possible. Work schedule has opened up, mostly home or close to home. will work with your schedule, would rather sell local but will ship if needed at buyers expense. thanks guys! if the price changed and you had already inquired...if the price is higher than original i will hold my word on the original, all new inquires are as listed but all parts are OBO. Last edited by Chevyguy111786; 10-19-2005 at 11:48 AM.

10-11-2005, 01:47 PM	#5
bean Registered User Join Date: Jun 2002 Location: Fort Worth, TX Posts: 920	core support i'd be interested in that core support if it's straight. I'm just in fort worth.

10-11-2005, 02:42 PM	#7
671blazer Registered User Join Date: Sep 2005 Location: hayward ca Posts: 68	interested in the doors, and inner fenders. any idea how much to ship to CA 94545. any pictures? __________________ 72k5 4wd 04 Tahoe 02 Roadstar Warrior 2000 Buick Lesabre on 20's Last edited by 671blazer; 10-11-2005 at 02:42 PM.

10-11-2005, 03:50 PM	#8
tom71 what happened to flint mi Join Date: Oct 2005 Location: san diego Posts: 436	swb fleet bed sides ? interested in the bed sides can i see pics and can you shippem ? im in cali 92106 ?

10-11-2005, 10:29 PM	#9
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,090	Would you be around this week to let someone have a peek? I'm interested in the Vintage Air kit & possibly more.... Pm me w/your schedule. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

10-11-2005, 12:16 PM	#2
chevyguy_72 Vintage Evil Join Date: Aug 2005 Location: Hastings, Nebraska Posts: 956	is the a/c unit for a a/c cab or non a/c cab? Might be interested Thanks

10-11-2005, 12:40 PM	#3
Chevyguy111786 Registered User Join Date: Apr 2003 Location: Garland, Texas Posts: 1,127	it is for an A/C cab. it works perfect and i have ALL the parts. it did not come with the control panel like some do, it hooks up to the factory A/C controls, which i also have and iwll include it.

10-11-2005, 01:28 PM	#4
70chevyfreak Registered User Join Date: Feb 2005 Location: Holt, Missouri. Near KC Posts: 64	PM sent

10-11-2005, 02:18 PM	#6
Chevyguy111786 Registered User Join Date: Apr 2003 Location: Garland, Texas Posts: 1,127	70chevyfreak- PM sent Bean- you are 2nd in line for the core support. it is near perfect..no rust if any and very straight

10-11-2005, 11:19 PM	#10
Primered_69 Registered User Join Date: Sep 2002 Location: Fort Worth Posts: 1,409	ANy pictures of the grille? I'm interested. __________________ 1969 Chevy LWB - with shaved handles; 3 1/2 front/ 5 1/2 rear drop; (waiting to be put back together)

10-12-2005, 01:59 AM	#11
tomatocity Registered User Join Date: Jun 2005 Location: Sacramento CA Posts: 1,255	2nd's on the grill. __________________ Got bored, sold everthing. Got bored, looking for a 1960-66 C-10. Want to build my last truck.

10-14-2005, 06:17 PM	#12
Chevyguy111786 Registered User Join Date: Apr 2003 Location: Garland, Texas Posts: 1,127	Finally got pics for you guys. due to the small space some pics aren't great and will be able to get better ones upon request. Attached Images

10-14-2005, 06:18 PM	#13
Chevyguy111786 Registered User Join Date: Apr 2003 Location: Garland, Texas Posts: 1,127	more pics Attached Images

10-14-2005, 06:19 PM	#14
Chevyguy111786 Registered User Join Date: Apr 2003 Location: Garland, Texas Posts: 1,127	and yet more pics Attached Images Last edited by Chevyguy111786; 10-14-2005 at 06:19 PM.

10-12-2005, 12:23 AM	#15
Chevyguy111786 Registered User Join Date: Apr 2003 Location: Garland, Texas Posts: 1,127	i'll get pictures tomorrow. My schedule this week is Wed. i'll be here Thursday i have work and class. So far i will be here friday and i will be here sunday. so let me know what you have and when you wanna take a peek. i'll get all pictures tomorrow and post them



Register or Log In To remove these advertisements.

10-12-2005, 12:24 AM	#16
Chevyguy111786 Registered User Join Date: Apr 2003 Location: Garland, Texas Posts: 1,127	as for shipping the larger items. i'm open to it but do not know who i would ship it through. other than building a crate and calling a freight company.

10-14-2005, 06:28 PM	#17
Chevyguy111786 Registered User Join Date: Apr 2003 Location: Garland, Texas Posts: 1,127	sorry for the bad pics...some items have been added or changed so check the first post again.

10-16-2005, 02:20 PM	#18
Chevyguy111786 Registered User Join Date: Apr 2003 Location: Garland, Texas Posts: 1,127	Re: Have to part my project Josh....or other moderators. A page came up saying i must be a supporter to sell. I thought i was but in the many board up grades understand if some information was lost. I tried to go to the page listed but it said it was unavailable. How do i again become a subscriber or supporter so i can sell these parts. or do i just need to go to evil-bay. just tryin to recoupe my investment and put it back in my 78 so i can sell it so i can in turn move to arkansas...lol...just makin it to spend it i guess. let me konw.

10-16-2005, 05:29 PM	#20
Chevyguy111786 Registered User Join Date: Apr 2003 Location: Garland, Texas Posts: 1,127	Re: Have to part my project thank you very much. really all i need to know is how to become a supporter or how much to donate and how to donate.

10-17-2005, 01:17 AM	#21
*Josh* He's got mean nasty FANGS! Join Date: Dec 1999 Location: Rockwell, NC Posts: 6,516	Re: Have to part my project This thread has all the required info. Josh __________________ 2004 K2500 Burb 1999 C3500 1985 Cutlass Supreme 1969 C-10 1967 C-10 Panel josh@67-72chevytrucks.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.