Fresh 327/350 turbo for sale...cheap! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FuelCellGuy · 11-06-2005, 03:19 PM

I have a small journal .030 over, small journal 327 for sale. My brother had this engine built for the 68 Camaro that I purchased from him. The engine and rebuilt tranny came with the car purchase. The engine has the double-hump 2.02/1.94 heads on the engine. The heads already have screw-in studes and guide plates installed. The engine DOES NOT have a cam and lifters. My brother did this so he could buy the cam and stall to match. Obviously, the tranny DOES NOT have a torque convertor. I am going for something a little more exotic for the Camaro. I hate to see the engine and tranny sit here. The going price is $500 for the engine and $100 for the tranny IF purchased together. The tranny will be $150 if sold seperately. The engine will be $500 either way. Engine must be picked up at my shop. I can load for $0. See attached pictures. P.S. this engine is balanced as well.

scooby3242 · 11-06-2005, 05:09 PM

Is the tranny a 6 inch tail.......where Mineola, Texas.. Im intrested in the tranny if a 6 inch tail..........

aitch · 11-06-2005, 06:27 PM

That would work well in my 79 Nova. I'll have to see how far I am from Mineola.

FuelCellGuy · 11-06-2005, 06:36 PM

scooby,
It is the 6 inch tailshaft. Let's deal!! I am about 2 hours from you.

aitch,
Come on, it can't be too far.

Later, Mark

scooby3242 · 11-06-2005, 08:20 PM

Pm Sent

FuelCellGuy · 11-06-2005, 08:52 PM

Transmission...SOLD!

qksilver · 11-06-2005, 10:28 PM

That is the engine I need for my 68 1/2 4x4 burb, right date code and everything..........
I want it! How do I get it home?
I have done 21,000 miles this year gathering parts, went back to work last week.
Shipping?
Pm me please,
thanks,
Steve

FuelCellGuy · 11-06-2005, 10:45 PM

I am willing to put it on a pallet and ship it. I should have stated that in the original post. I can check on shipping if you like. PM me an address and I'll get to worl on it. Later, Mark

1969 stepside · 05-03-2011, 05:42 PM

Quote:

Originally Posted by FuelCellGuy

I am willing to put it on a pallet and ship it. I should have stated that in the original post. I can check on shipping if you like. PM me an address and I'll get to worl on it. Later, Mark

I am an hour and a half from you. Is the engine still forsale?

67stpside · 11-10-2005, 11:11 PM

Pm sent

qksilver · 11-10-2005, 11:33 PM

I wasn't able to find out anything. If the shipping would be cheaper I would definity buy it but 500 is too much for me right now.
Thanks,
Steve

larry may · 11-10-2005, 11:58 PM

So what is status of the Engine? Still up for sale? Larry

67stpside · 11-11-2005, 12:20 AM

im defently interested if the shipping is not insane

scooby3242 · 11-14-2005, 07:54 PM

Pm'd you again

DesertCat · 05-03-2011, 05:48 PM

5 1/2 year old thread, more likely you'll find aliens in your breakfast burrito

**zicc1835** · 05-03-2011, 06:23 PM

Quote:

Originally Posted by DesertCat

5 1/2 year old thread, more likely you'll find aliens in your breakfast burrito

that made my day too funny

FuelCellGuy · 05-03-2011, 07:44 PM

Damn, I sold that cheap....for 2011 prices....yep....long gone....

11-06-2005, 03:19 PM	#1
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Fresh 327/350 turbo for sale...cheap! I have a small journal .030 over, small journal 327 for sale. My brother had this engine built for the 68 Camaro that I purchased from him. The engine and rebuilt tranny came with the car purchase. The engine has the double-hump 2.02/1.94 heads on the engine. The heads already have screw-in studes and guide plates installed. The engine DOES NOT have a cam and lifters. My brother did this so he could buy the cam and stall to match. Obviously, the tranny DOES NOT have a torque convertor. I am going for something a little more exotic for the Camaro. I hate to see the engine and tranny sit here. The going price is $500 for the engine and $100 for the tranny IF purchased together. The tranny will be $150 if sold seperately. The engine will be $500 either way. Engine must be picked up at my shop. I can load for $0. See attached pictures. P.S. this engine is balanced as well. Attached Images

11-06-2005, 05:09 PM	#2
scooby3242 Registered User Join Date: Apr 2005 Location: Bedford, Tx Posts: 40	Re: Fresh 327/350 turbo for sale...cheap! Is the tranny a 6 inch tail.......where Mineola, Texas.. Im intrested in the tranny if a 6 inch tail.......... __________________ 1973 gmc swb

11-06-2005, 06:27 PM	#3
aitch Senior Member Join Date: Sep 2004 Location: N.W. Arkansas Posts: 456	Re: Fresh 327/350 turbo for sale...cheap! That would work well in my 79 Nova. I'll have to see how far I am from Mineola. __________________ 69 GMC 3/4 ton LWB 383 TH400 Dana 60 '84 300ZX '79 Nova (for sale)

11-06-2005, 06:36 PM	#4
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Re: Fresh 327/350 turbo for sale...cheap! scooby, It is the 6 inch tailshaft. Let's deal!! I am about 2 hours from you. aitch, Come on, it can't be too far. Later, Mark Last edited by FuelCellGuy; 11-06-2005 at 06:38 PM.

11-06-2005, 08:20 PM	#5
scooby3242 Registered User Join Date: Apr 2005 Location: Bedford, Tx Posts: 40	Re: Fresh 327/350 turbo for sale...cheap! Pm Sent __________________ 1973 gmc swb

11-06-2005, 08:52 PM	#6
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Re: Fresh 327/350 turbo for sale...cheap! Transmission...SOLD!

11-06-2005, 10:28 PM	#7
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: Fresh 327/350 turbo for sale...cheap! That is the engine I need for my 68 1/2 4x4 burb, right date code and everything.......... I want it! How do I get it home? I have done 21,000 miles this year gathering parts, went back to work last week. Shipping? Pm me please, thanks, Steve

11-06-2005, 10:45 PM	#8
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Re: Fresh 327/350 turbo for sale...cheap! I am willing to put it on a pallet and ship it. I should have stated that in the original post. I can check on shipping if you like. PM me an address and I'll get to worl on it. Later, Mark

11-10-2005, 11:11 PM	#10
67stpside Registered User Join Date: Jun 2005 Location: Indiana Posts: 33	Re: Fresh 327/350 turbo for sale...cheap! Pm sent

11-10-2005, 11:33 PM	#11
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: Fresh 327/350 turbo for sale...cheap! I wasn't able to find out anything. If the shipping would be cheaper I would definity buy it but 500 is too much for me right now. Thanks, Steve

11-10-2005, 11:58 PM	#12
larry may Senior Member Join Date: Jul 2005 Location: MISSOURI Posts: 3,256	Re: Fresh 327/350 turbo for sale...cheap! So what is status of the Engine? Still up for sale? Larry

11-11-2005, 12:20 AM	#13
67stpside Registered User Join Date: Jun 2005 Location: Indiana Posts: 33	Re: Fresh 327/350 turbo for sale...cheap! im defently interested if the shipping is not insane

11-14-2005, 07:54 PM	#14
scooby3242 Registered User Join Date: Apr 2005 Location: Bedford, Tx Posts: 40	Re: Fresh 327/350 turbo for sale...cheap! Pm'd you again __________________ 1973 gmc swb

05-03-2011, 05:48 PM	#15
DesertCat Registered User Join Date: Mar 2011 Location: Valley of the Sunstroke, Arizona Posts: 1,210	Re: Fresh 327/350 turbo for sale...cheap! 5 1/2 year old thread, more likely you'll find aliens in your breakfast burrito __________________ My build thread - Devastation and Reform http://67-72chevytrucks.com/vboard/s...d.php?t=567131

05-03-2011, 07:44 PM	#17
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Re: Fresh 327/350 turbo for sale...cheap! Damn, I sold that cheap....for 2011 prices....yep....long gone....



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.