What is a modification you WONT do or regret??

[jesse977]

What is a modification that you WONT do or regret??

[SCOTI]

I won't ever jack up the ass end of a vehicle to clear bigger tires (just say no to extended shackles ).

I don't regret lowering almost every vehicle I've ever owned.

[DroppedZ84]

Originally Posted by SCOTI

I won't ever jack up the ass end of a vehicle to clear bigger tires (just say no to extended shackles ).

I don't regret lowering almost every vehicle I've ever owned.

I have to agree with Scoti on this one. I hate the stinkbug look, and I LOVE slammed automobiles.

[bodydropped]

Originally Posted by SCOTI

I don't regret lowering almost every vehicle I've ever owned.

me either i rather lowered than jacked up but i still love them square bodys tukin wheel and layin rocker and havin a crew cab dually tow pig tukin 22' 18 wheeler rims

[Jebb1978]

I have never been a fan of door handle shaving or changing, just don't like it??

[Russell]

I won't ever hack up my fenders to get some sorta mudders to clear, or otherwise mutiliate my truck like one of those "truggies" or tube buggies

I don't regret my swap to 4x4, the standard tranny, and Tuned port Injection

[MandarinSixSeven]

Originally Posted by Russell

I won't ever hack up my fenders to get some sorta mudders to clear...

Man, I fully agree on this one, I was in the truck a few weeks ago and saw a cool looking 71-72 in the rear view pull up beside me. After a few 100 metres he passed me so I could check out his ride...god I almost barfed, he had the fenders hacked out so wide they were almost up into his hood, and to top it off, instead of doing a good job on the cut, he put some walmart Door trim around the edges...

looked so bad I almost gave him a thumbs down! He had it at pretty much stock height, but with some stupid big tires on it, so it looked like a lowrider with mudders.

The one thing I will never regret is, as SCOTI says, lowering pretty much any car I have ever owned. In fact, I just got done lowering my new wagon.

[benoit454]

I myself would never run 22 or bigger wheels for sure. Probably not even 20's. The only time IMo I like the big wheels is if big tires are there with at leasy a 2-3 inch tal sidewall. I'm sorry most of you guys love it but I sure don't.

Around here lowered vehicles don't survive to many potholes and rough roads. We had a lowered s1 one set of blocks split in two, the second done fine but the air dam always got busted up from around here.

As for something I don't regret I'm not sure I'll have to get back to you on that.

[Captkaos]

I won't ever shave the door handles on a daily driver again. Possibly won't do it on a non daily.

[benoit454]

Ok the one I don't regret is adding bigger tires to a 4x4, or adding a bigger engine in any vehicle then what it had or came with. Like changing a straight 6 to small block or big block. Or 305 to 350.

[HAVA79]

Chris, why not the shaved handles? I am looking into autoloc stuff, it will also be a daily driver. Its a 79 blazer, top always off.........jesse

[Captkaos]

Originally Posted by HAVA79

Chris, why not the shaved handles? I am looking into autoloc stuff, it will also be a daily driver. Its a 79 blazer, top always off.........jesse

Well, I have several experiences with the previous truck where it was pouring down rain and I had to pop the door open and it didn't and the significant other was getting soaked. The cool factor just wasn't worth the sacrifice of the dependability factor. Of course this was back about 15 years ago...

[SanitysBane]

I regret not having enough money.

[bgangsta999]

Originally Posted by SanitysBane

I regret not having enough money.

everyones problem

[Jonboy]

I will never put a rachet shifter in anything ever again.

[.030over]

Ok, I have violated some of your won't dos on this old project. Cut outs, 18x44s, 500 caddy motor, blazer to PU body mods, sectioned C60 bumper. Oh well! I think that most mods that are done with some forethough and quality workmanship are to be admired, even if they aren't your favorite. The only thing that I have regreted doing to any of my projects is selling them.
Scott

[Russell]

Originally Posted by .030over

Ok, I have violated some of your won't dos on this old project. Cut outs, 18x44s, 500 caddy motor, blazer to PU body mods, sectioned C60 bumper. Oh well! I think that most mods that are done with some forethough and quality workmanship are to be admired, even if they aren't your favorite. The only thing that I have regreted doing to any of my projects is selling them.
Scott

Absolutely nothing wrong with that truck!

The big difference there is that you have fender flares on it

Most of the trucks you see, are one that have been sliced and diced, and just left that way. Looks terrible as far as I am concerned! I also hate it when I see a perfectly nice truck, that'd be an excellent cadidate for restoration, get hacked up, and turned into a truggy, and eventually a tube buggy. Total waste of a nice truck. Do that to an old beater up, rusty truck, not to a nice one

[Blackstone]

I will never dump money into a 2wd longbed. I will never regret repainting my truck "Grey Poupon Yellow"... because I know there won't be another like it around town.

[Mickey_D]

Not full size Chevy related, but one mod I will NEVER regret is ripping the old 1.8L out of my '79 Chevy LUV 4X4 and dropping in a well built and lovingly (read heavily) breathed-on 2.0L out of an Isuzu Impulse Turbo.

It was lots of fun to embarrass the hell out of guys in their brand new 5.0 Mustang GT's with it.

One "mod" I will always regret is buying a Mazda RX-7 and "playing with it" a little. It kind of spoiled everything else as far as performance goes. There's just something about a USEABLE 12,000 RPM range and enough bhp to move small continents in something little more than a gokart. Very dangerous on the license and pocketbook, though.

As for mods to my trucks? Well, I won't bother doing any to my '81. There's just not enough left of it to make it worthwhile. I don't regret the cherry bomb muffler I stuck on there when the stock one rusted out and fell off. Wit the '90 Silverado I might do a few gentle mods, but they will all be bolt-on. Depends on how ambitious I get, I might put a half decent stereo in it.




Oh, and something I will NEVER do is anything that can be considered or

[N2TRUX]

Won't do- Cut the bed out on my 77 to get it "laying rockers".
Don't regret- Bagging the 77 and putting 20's on it.

[Jebb1978]

Originally Posted by N2TRUX

Won't do- Cut the bed out on my 77 to get it "laying rockers".
Don't regret- Bagging the 77 and putting 20's on it.

You are my hero!

[SSC's76]

I wont lower my 76, I wont cut any holes in it. I just like the way it looks stock, call me crazy.

Here you 4x4 lovers go. My Dad built this in the early 80's. Not hacked built right, 454, 4 speed and sold it for alot more then he put into it! Sorry no pictures of the drivetrain that Ive found so far.

[patrolman808]

I won't ever go bigger than 20's on anything.

I don't regret lifting my 03 Dodge quad cab 4x4 dually 9" and putting 35" Swampers on it, however I DO regret leaving the Edge EZ fueling box maxed out all the time ($9500 mistake).

[benoit454]

I love thoose 4x4's I think the cut out fenders are OK when the cut out flares are used, but when they are hacked up without flares, or flares hacked up too they just looks bad. I'd rather lift one up, to clear tires but thoose look nice with them cut out.

[oldraven]

I'll use a visual. I would never ever use these.



I'd also never put those angular side stripes, or hockey stripes, in bright colours on anything.

And I regret not prepping better for paint, in both cases.