Heater Box - The 1947 - Present Chevrolet & GMC Truck Message Board Network

uk72step · 11-15-2005, 06:38 AM

Hi Guys,

I'm stripping down the 72. I pulled out the remaining hoses and took to core support off last night, so the front clip is now off totally.
I removed the heater box (engine bay side) My core is fried (rusted to the extreme).
The question I have is, does anyone produce a non AC heater box (the glass fiber bit that the motor, the diverter and the core go into)?
A corner is broken on mine (previous PO seems to have over tightened it and split the corner.
Any repos on the market?
Good news is though the firewall is solid except one little inch size hole that will need plated on the drivers side. Other than that the whole thing in th efirewall it was in surprisingly good condition....even down to the rockers!!

Cheers
Lee

fixerman · 11-17-2005, 02:07 PM

My heater box also had a big hole in it that someone tried to patch with fiberglass. I have not been able to find a repro part and have looked everywhere. I plan on trying to re-do the patch and then paint the box.

sneakysnake · 11-17-2005, 03:31 PM

Non A/c boxes are a dime a dozen, unless you are just looking for new. Swap meets or ask, a board member should have one.

76bonanza · 11-17-2005, 03:45 PM

here is one one ebay
http://cgi.ebay.com/ebaymotors/67-72...14598482QQrdZ1

*wolfthing2000* · 11-17-2005, 05:36 PM

ebay one looks like interior box

76bonanza · 11-17-2005, 08:11 PM

you are right wolfthing2000 mis read the post

11-15-2005, 06:38 AM	#1
uk72step outta the car velocityboy Join Date: Nov 2004 Location: Scotland Posts: 112	Heater Box Hi Guys, I'm stripping down the 72. I pulled out the remaining hoses and took to core support off last night, so the front clip is now off totally. I removed the heater box (engine bay side) My core is fried (rusted to the extreme). The question I have is, does anyone produce a non AC heater box (the glass fiber bit that the motor, the diverter and the core go into)? A corner is broken on mine (previous PO seems to have over tightened it and split the corner. Any repos on the market? Good news is though the firewall is solid except one little inch size hole that will need plated on the drivers side. Other than that the whole thing in th efirewall it was in surprisingly good condition....even down to the rockers!! Cheers Lee __________________ ..give it a turn here, take some wedge out there, we'll win some races... Last edited by uk72step; 11-15-2005 at 06:39 AM.

11-17-2005, 02:07 PM	#2
fixerman Registered User Join Date: Jul 2005 Location: Idaho Posts: 12	Re: Heater Box My heater box also had a big hole in it that someone tried to patch with fiberglass. I have not been able to find a repro part and have looked everywhere. I plan on trying to re-do the patch and then paint the box.

11-17-2005, 03:31 PM	#3
sneakysnake It's a catastrophic success. Join Date: Jan 2003 Location: Oklahoma Posts: 2,077	Re: Heater Box Non A/c boxes are a dime a dozen, unless you are just looking for new. Swap meets or ask, a board member should have one.

11-17-2005, 03:45 PM	#4
76bonanza Senior Member Join Date: Mar 2003 Location: St robert Mo Posts: 2,001	Re: Heater Box here is one one ebay http://cgi.ebay.com/ebaymotors/67-72...14598482QQrdZ1 __________________ 1968 c10 lowered 3" 4" 355/Th400 built by Hatfield racing in joplin MO

11-17-2005, 05:36 PM	#5
wolfthing2000 Account Suspended Join Date: Oct 2004 Posts: 1,276	Re: Heater Box ebay one looks like interior box

11-17-2005, 08:11 PM	#6
76bonanza Senior Member Join Date: Mar 2003 Location: St robert Mo Posts: 2,001	Re: Heater Box you are right wolfthing2000 mis read the post __________________ 1968 c10 lowered 3" 4" 355/Th400 built by Hatfield racing in joplin MO

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.