|
12-22-2005, 08:00 PM | #1 |
Active Member
Join Date: Nov 2005
Location: Orlando, Fl.
Posts: 123
|
73- 87 Engine Xmember
Can anyone tell me if the Xmember out of an 87 c10 will bolt up to my 69 suburban, i found a good deal at one of the local boneyards 150 for everything from spindle to spindle.
|
12-22-2005, 08:43 PM | #2 |
Registered User
Join Date: Mar 2004
Location: Portland, Oregon
Posts: 232
|
Re: 73- 87 Engine Xmember
In 1 word
"YES" Keith |
12-22-2005, 09:46 PM | #3 | |
Active Member
Join Date: Nov 2005
Location: Orlando, Fl.
Posts: 123
|
Re: 73- 87 Engine Xmember
Quote:
|
|
12-22-2005, 10:34 PM | #4 |
Registered User
Join Date: Mar 2004
Location: Portland, Oregon
Posts: 232
|
Re: 73- 87 Engine Xmember
Ya the crossmember will bolt up just fine. You will have to fittle with a few things to get everything to work properly. i.e. disc brakes, power steering and other components depending on what you all got. There are many threads floating around answering all the questions you may have on crossmember swaps , but if you have any questions feel free to ask. Some one will have an answer for you.
Keith |
12-22-2005, 10:38 PM | #5 |
Registered User
Join Date: Mar 2004
Location: Portland, Oregon
Posts: 232
|
Re: 73- 87 Engine Xmember
I forgot to mention if you havent already you will wanna grab the front drag lin kand tie rods and all of that. The 73-87 spinldes have a different taper then your 69 tie rods.
Keith |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|