huge parts list /trucks/last time. I'm done md/pa area

[gn4u2c]

In a effort to move this stuff faster and to help out the board I will donate 10% of all sales to the board. This includes the car !!! So you could help put $550.00 toward making this place better for us all.
350 chevy engine 4 bolt main low miles on rebuild 1980 engine torker II intake, flexlite fan,Hei with hi output coil, sealed power rings/pistons.alt, waterpump, power steering pump, black tall chevrolet valve covers, chrome alt bracket. comes with headers for 4x4 73-87 they are used / rusty but no holes. $750.00
Old school dual bed bar with light mounts $40.00 pickup
I have a 76 gmc has tube alloy grill $25.00
76 hood NOT RUSTED OUT OR KINKED ! $50.00 pickup
decent (trimmed for 33's) fenders $20.00 each pickup
complete 465/205 changeover setup crossmenber / bolts/ linkage/pedals/floor hump,trans,bell,clutch,t-case,shifter 100% 350.00 with driveshafts. !!!!!!!!!!!!!!!!!!!!!!!
205/dana 44 driveshaft extended 1 1/2 inch for 6 inch lift $50.00 joints are tight.
205/14 bolt slip yoke rear shaft $25.00 joints are tight.
complete 465/205 setup bell clutch linkage floor hump, crossmember everything you need !! $350.00 good clutch also. dirty works perfect. pickup
76 front chrome bumper decent shape $25.00
3/4 ton sring packs $20.00 each pickup only
85 front bumper nice shape $40.00 pickup
NEW in box 85 front bumper $100.00 pickup
85 GM driver fender surface rust in the inside but no holes easy fix $40.00 pickup
85 gm drivers door no dents, no rust $100.00 pickup
16 gal gas tank $10.00 pickup only
2wd steering box $60.00

blue pw,pl door panels in great shape $50.00 pair
blue visors $20.00 pair
blue outer seat belts $50.00
6 inch lift shocks with red boots (superlift) $75.00 only been used in the driveway !
NEW 8 inch rear drop bumper S/S brakets made in rear sweet $250.00 you pickup. Thats a huge savings!
New putman 8' drop hitch $75.00 NEW with new hardware.
stock 87 chevy steering wheel with cap (silverado model) super nice $40.00 shipped
speaker brackets with speakers in good shape $25.00 shipped
4 new Interco thornbirds 35x12.5x16.6 bought for my 84 but I'm scrapping the prodject. $700.00 pickup

If you want to make a deal on everything lets talk !

my 84 454 1 ton srw is for sale also check post in other section

All the random stuff hinges, bolts, brackets and such you need I may have just PM me with a list.

Also dumping my chevell prodject 68 chevelle 2 door restoration well under way.
frame has been pulled cleaned sanded and painted / reinstalled
350 engine has been put in (original 307 included)
new GM right quarter put on and new goodmark patch on the left.
original rockers,hood,header, doors,interior floors are in great shape.
Trunk pan replaced with the new full 1 piece unit looks great !
fenders had lower panels welded in the correct way.
This is a Very soild car
nothing is missing you will not have to hunt for parts.
butternut yellow car with black bench seat interior. colum shift auto even has the original radio.
Included are the parts needed to convert to power disc brakes panels have been trimmed (painted in jabs) before assembly so they are nice. just finish out the sanding and prime/paint.
$5,500 the way it is bottom line.
car is located in MD 21120 zip

When this crap is all gone I'm done. Back to spending time with the wife before I wind up divorced and on the street. I am keeping my 3/4 and will continue to be at local events and on the board as I moddify it.

stuff is some at my house some at my dads pa17329 or md 21120 zip only 15-20 min apart. can meet at ither place.
things marked pickup are just that pickup only! will ship on your dime other items.

[DOOBZ]

Im interested in the door panels, are they complete? Do you have any pics of them? Thanks Mike

[gn4u2c]

They are complete with the sealing strips and arm rest pads the cups that go behind the handel and all

[DOOBZ]

U have a PM.

[muddyole 69]

Hats off to ya dude sometimes priorities need to change to keep the peace around the pad best of luck with the sales later Mike

[greg0380]

pm's you..

[gn4u2c]

panels

[Burnsman]

How much to ship the rear driveshaft to 16335? Thanks! Brian

[gn4u2c]

I have one person ahead of you on it if you can hold out a few days so I can see if it pans out.

[Burnsman]

Dang. Day late and a dollar short. Ok, just let me know. Thanks. Brian

[DOOBZ]

Sorry, But im going to pass on the door panels Im looking for the one with the cloth inserts and pull straps. BTW them look like a nice pair of panels!!! Thanks again and good luck with sellin your parts. Mike

[OLDCHEV4X4]

do you have any 76 truck exaust manifolds that fit a 2.25 exaust pipe? Dont have to be 76, but that style.
thanks, Randy

[gn4u2c]

hmm.. I shouls shoot me a pic or part # of the correct one you need I have a ton of them around.

[gn4u2c]

driveshaft still avalible. Pm me if you want it . Best to come pick it up shipping is expensive. mapquest intersection of blue hill rd/ glenville rd pa 17329

[OLDCHEV4X4]

OK, send me you email address and i'll shoot you some pictures of the 2.25 exaust manifolds i need.
randyipf@verizon.net
Thanks, Randy

[wedgemon]

How about front drive shaft? Need one about 26-27 inch long from center of uni to flange.

- Dave
1980 K10 350/SM465/NP205

[gn4u2c]

Looks like the front is what you need. $50.00 + shipping cost thats about $39.00 wtf.... no I double checked.

use jasond1986gn@aol.com

[bigblockorange]

Are you still around PA. PM me if you have time. Rob central PA

[rick1956]

I haven't seen anyone reply that the speakers and brackets have been sold yet. Are they still available?

These are the 4x10 corner ones that I can fit into my 84 are they not?

I'm interested if so. Shoot me a PM and I can sent you funds or Paypal or whatever you prefer.

Thanks.

[sick69]

I hate to say it but I don't think he is going to reply. His account was suspended for some reason. His last post in this thread was in 2006.

Frank