What kind of transmisson do you have in your truck? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bamm · 07-15-2002, 11:06 PM

What do you have in your truck?

Longhorn Man · 07-15-2002, 11:14 PM

Add anotehr TH350 in there...i could only vote once.

Bamm · 07-15-2002, 11:21 PM

My fault , when I set the poll up I was figuring you could only have one tranny in your truck, wasn't thinking about multiple trucks......Sorry...................JB

jhwkns · 07-15-2002, 11:52 PM

456 Saginaw 4-speed (from 82 camaro) Hurst shifter .373 gear

Wabash · 07-16-2002, 01:15 AM

turbo 350 with a R.V shift kit and a 1900 stall

O'l Buck · 07-16-2002, 01:44 AM

I have a TH350 in the 72, and a 700R4 in the Jimmy

**68Custom** · 07-16-2002, 03:03 AM

As far as i know its the original TH400 in mine..... i noticed though that its the tube filter when i was changing my fluid, instead of the flat filter, wasn't that a 67 thing and changed in 68 or was my truck just a lucky one to get the tube? I can get the numbers off the side to check if it helps, i think i would like to know!

Aaron

70c10 · 07-16-2002, 07:36 AM

350 Turbo w/ shift kit

Beast388 · 07-16-2002, 09:21 AM

TH350 rebuilt by yours truely and a TCI TranScat Super II shift kit and 1900rpm stall.

okietruck · 07-16-2002, 09:26 AM

Runing a manual 3 speed Saginaw now but I'm looking for a 4 speed overdrive.

CE20934 · 07-16-2002, 11:35 AM

NP435CR. Good trans, but a 4.56:1 1st is just too high. Not enough gear reduction or torque multiplication. An SM420 or CH465 would be perfect.

Mixup · 07-16-2002, 02:35 PM

700R4 with a shift kit.

JJR · 07-16-2002, 02:39 PM

Original three-on-the tree.

jay6891 · 07-16-2002, 07:02 PM

700r4 with shift kit, lockup converter, 19 mpg with 3.73 gears

*racedvl* · 07-16-2002, 10:55 PM

I have a passenger car M20 4 speed.........

Jesse 67 c-10 · 07-17-2002, 01:04 AM

What about a 5 speed? Anyone else besides me and Huck have one?
Jesse

Rabid · 07-17-2002, 01:26 AM

700R4. Loving every mile with it too.

Danny69' · 07-17-2002, 02:00 AM

Who's running the powerglides?

Huck · 07-17-2002, 08:53 PM

FIVE SPEEDS RULE!!!!!!!!!!!!!!!!! Unless you are in traffic, or have a cramp in your left leg, or need your wife to use the truck for a day or so, or need to move about a 1/2 inch to line up the trailer hitch. 96 chevy 1/2 ton 5speed = light weight, strong, cheep, and very practical for most applications---with 20-22mpg hgwy. (:>)

tbolt427 · 07-17-2002, 09:40 PM

ROCKCRUSHER

1968 C-10Cowboy · 07-17-2002, 10:22 PM

Im not for certain on what tranny I have. Im going by what the guy who sold me the truck said.....400T. It does have a shift kit in it cause It shifts kinda hard especially at high rpm's. Anyone here know how I can tell?

shortbed70 · 07-17-2002, 10:28 PM

350 th w/ manual valve body B&M special

Bamm · 07-18-2002, 01:30 PM

TTT

67StepsideGuy · 07-18-2002, 02:36 PM

Glad to see im not the only one with that little tiny 3speed

Kas68c10 · 07-19-2002, 12:37 PM

5 spd from old Camaro

View Poll Results: What type of transmission do you have in your truck?
3spd Manual	14	11.11%
4spd Manual	22	17.46%
Powerglide	3	2.38%
Turbo 350	44	34.92%
Turbo 400	27	21.43%
700R4/Overdrive	16	12.70%
Voters: 126. You may not vote on this poll

07-15-2002, 11:06 PM	#1
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	What kind of transmisson do you have in your truck? What do you have in your truck? __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

07-15-2002, 11:21 PM	#3
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	My fault , when I set the poll up I was figuring you could only have one tranny in your truck, wasn't thinking about multiple trucks......Sorry...................JB __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

07-15-2002, 11:52 PM	#4
jhwkns Registered Cruiser Join Date: May 2002 Location: Las Vegas NV Posts: 2,230	456 Saginaw 4-speed (from 82 camaro) Hurst shifter .373 gear __________________ I intend to live forever. So far, so good.

07-16-2002, 01:15 AM	#5
Wabash Registered User Join Date: Apr 2001 Location: Alberta, Canada Posts: 534	turbo 350 with a R.V shift kit and a 1900 stall __________________ 1972 C/10 LWB 1972 K/5 Blazer

07-15-2002, 11:14 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Add anotehr TH350 in there...i could only vote once.

07-16-2002, 01:44 AM	#6
O'l Buck Recovering Truck Driver Join Date: Mar 2002 Location: Orleans, NE USA Posts: 1,883	I have a TH350 in the 72, and a 700R4 in the Jimmy __________________ 67 K-20 350, SM465, Eaton rear, 4.56 no spin option 00 Dodge 2500 4x4, 24V cummins, 5 speed Chad South Central Nebraska

07-16-2002, 03:03 AM	#7
68Custom Hammer On! Join Date: Jul 2001 Location: Olathe, KS Posts: 473	As far as i know its the original TH400 in mine..... i noticed though that its the tube filter when i was changing my fluid, instead of the flat filter, wasn't that a 67 thing and changed in 68 or was my truck just a lucky one to get the tube? I can get the numbers off the side to check if it helps, i think i would like to know! Aaron __________________ 1968 C20 Inline 6 250 SM465 4 speed 1968 K10 Inline 6 250 SM465 4 speed

07-16-2002, 07:36 AM	#8
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	350 Turbo w/ shift kit __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

07-16-2002, 09:21 AM	#9
Beast388 Suburbans RULE! Join Date: Jan 2000 Location: Clinton, IA 52732 Posts: 689	TH350 rebuilt by yours truely and a TCI TranScat Super II shift kit and 1900rpm stall. __________________ --Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's.

07-16-2002, 09:26 AM	#10
okietruck Registered User Join Date: Apr 2002 Location: Tulsa, OK, USA Posts: 117	Runing a manual 3 speed Saginaw now but I'm looking for a 4 speed overdrive.

07-16-2002, 11:35 AM	#11
CE20934 Senior Member Join Date: Apr 2002 Location: Help! I'm in an office park with its own network of freeways! Posts: 470	NP435CR. Good trans, but a 4.56:1 1st is just too high. Not enough gear reduction or torque multiplication. An SM420 or CH465 would be perfect. __________________ '67 C20--427 tall deck/SM420, 4.10 HO52 (Michigan has not been kind to the Old Man) '95 Caprice--355 LT1/T56/3.42 8.5" 10-bolt (daily driver, almost 300k on the chassis) '07 Outback--wife's car. 125k & counting. No head gasket or transmission issues yet. fingers crossed

07-16-2002, 02:35 PM	#12
Mixup Registered User Join Date: Jan 2002 Location: Henderson, NV Posts: 358	700R4 with a shift kit. __________________ 1980 Chevy Shortbed Pickup 1969 Z28 engine Turbo 350

07-16-2002, 02:39 PM	#13
JJR Registered User Join Date: Apr 2000 Location: Leesburg, GA Posts: 746	Original three-on-the tree. __________________ FOUNDING MEMBER OF THE DRUM BRAKE CLUB Second Owner 70 C-10 Second Owner 93 GMC C1500 Third Owner 99 C2500 Crew Cab Short Bed

07-16-2002, 07:02 PM	#14
jay6891 Car Knocker Join Date: May 2001 Location: jefferson,arkansas Posts: 664	700r4 with shift kit, lockup converter, 19 mpg with 3.73 gears __________________ 68 c-10,91 sportside bed,350 .030 over,4 bolt,10-1 comp,2.05 intake/1.94 exhaust,1.6 Harland Sharp roller rockers,edelbrock rpm cam and intake w/750 carb, 700r4, 3.73 gears,Jacabbs Electronic Igntion w/Accel HEI distributer and super coil. ZR-1 roll pan, filled tailights. Blazer tank. Hidden hitch. 2 1/2" Flowmaster 40's. Parts bought but not installed>> ford 9" posi with disc. CCP front and rear lowering kit 4/5. Cab corners,foor boards,rockers, cab braces, Phatom grill, Painless wiring kit.



Register or Log In To remove these advertisements.

07-16-2002, 10:55 PM	#15
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	I have a passenger car M20 4 speed.........

07-17-2002, 01:04 AM	#16
Jesse 67 c-10 Registered User Join Date: Feb 2000 Location: Edmonton, Alberta, Canada Posts: 599	What about a 5 speed? Anyone else besides me and Huck have one? Jesse __________________ Edmonton, Alberta, 67 c-10, Long fleet, front disks, 5 lug rear end, 327 with Vortechs, edlbrock manifold, comp cams XE 256, 600cfm carb. Backed by a getrag 5 speed and 1 piece driveshaft. 1993 Dihatsu Hijet Jumbo cab 4x4, currently converting to battery electric power.

07-17-2002, 01:26 AM	#17
Rabid Registered User Join Date: May 2001 Location: Honolulu, HI Posts: 1,237	700R4. Loving every mile with it too.

07-17-2002, 02:00 AM	#18
Danny69' Registered User Join Date: May 2002 Location: Spokane, WA Posts: 93	Who's running the powerglides? __________________ 1969' LWB [Work in Progress]

07-17-2002, 08:53 PM	#19
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,261	FIVE SPEEDS RULE!!!!!!!!!!!!!!!!! Unless you are in traffic, or have a cramp in your left leg, or need your wife to use the truck for a day or so, or need to move about a 1/2 inch to line up the trailer hitch. 96 chevy 1/2 ton 5speed = light weight, strong, cheep, and very practical for most applications---with 20-22mpg hgwy. (:>)

07-17-2002, 09:40 PM	#20
tbolt427 Registered User Join Date: Jan 2002 Location: Nowhere USA Posts: 20	ROCKCRUSHER __________________ Locked and Glocked 69/C-10 L79 M-22

07-17-2002, 10:22 PM	#21
1968 C-10Cowboy Registered User Join Date: Jul 2002 Location: Midland,Texas Posts: 46	Im not for certain on what tranny I have. Im going by what the guy who sold me the truck said.....400T. It does have a shift kit in it cause It shifts kinda hard especially at high rpm's. Anyone here know how I can tell? __________________ 350/.30 400 Turbo Trans 3.73 Rear end

07-17-2002, 10:28 PM	#22
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	350 th w/ manual valve body B&M special __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

07-18-2002, 01:30 PM	#23
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	TTT __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

07-18-2002, 02:36 PM	#24
67StepsideGuy Registered User Join Date: May 2002 Location: Minden IA Posts: 18	Glad to see im not the only one with that little tiny 3speed

Register or Log In To remove these advertisements.

07-19-2002, 12:37 PM	#25
Kas68c10 Registered User Join Date: Apr 2000 Location: Freeland,Michigan,USA Posts: 312	5 spd from old Camaro __________________ 1968 SWB Stepside, 250,pwr disc brake and tilt pwr steering, 5 spd tranny, HEI,Accel coil,K&N filter,Seat from a later truck with built in seatbelts, front and rear sway bars, moved gas tank to under the bed, headman hedders, new chrome bumpers,one wire alternator,Weber k550cub carburator...WORK IN PROGRESS, Freeland MI , Just bought a 72 Jimmy!!!!!!!!!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode