Weather stripping...I may not be the smartest person.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fade94 · 01-06-2006, 11:11 AM

But when I'm going East bound and the wind is out of the North, I get hit in the ear by a breeze....it MAY be time for some new seals.

**truckdude239** · 01-06-2006, 11:32 AM

i've been told to use s-10 striping beacuse it just slides on

MDC · 01-06-2006, 02:14 PM

Hey Fade, sounds like the easiest soultion would be to go west when the wind's out of the north. Save all your eastbound drivin' for those days when there's a south breeze.

fade94 · 01-06-2006, 04:22 PM

No doubt.

I need to get busy and get my new/old seat in I got from ya. Trying to wait until I get my seat belt situation finalized. I have some black outer to replace the one white outer and generic left outer. But I still need to get replacement center pieces. I have them, just need to get them out of the cab.

**tnblazerk5** · 01-06-2006, 04:33 PM

Quote:

Originally Posted by fade94

But when I'm going East bound and the wind is out of the North, I get hit in the ear by a breeze....it MAY be time for some new seals.

well at least your not gettin air in from the floor , mines got the rare floor air built in

fade94 · 01-06-2006, 05:05 PM

Quote:

Originally Posted by tnblazerk5

well at least your not gettin air in from the floor , mines got the rare floor air built in

I wouldn't say that either...

I get a direct shot up the pant leg from the clutch linkage hole. Plus, the hole where the shifter cable wend from the floor shifter was in before I got it, plus the hole from the 3 speed shifter that was added on sometime in it's past life.

I'll get them all patched, but wanted to be able to drive it for a change.

Rollie396 · 01-06-2006, 09:06 PM

LOL does that ever bring up memories of driving my 66 in the winter.Use to shoot snow up through the hole in the floor so it was snowing in the cab half the time.I musta looked like a mobile snow globe!

01-06-2006, 11:11 AM	#1
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	Weather stripping...I may not be the smartest person.... But when I'm going East bound and the wind is out of the North, I get hit in the ear by a breeze....it MAY be time for some new seals. __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

01-06-2006, 11:32 AM	#2
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,237	Re: Weather stripping...I may not be the smartest person.... i've been told to use s-10 striping beacuse it just slides on __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

01-06-2006, 02:14 PM	#3
MDC Registered User Join Date: Oct 2005 Location: N Texas Posts: 727	Re: Weather stripping...I may not be the smartest person.... Hey Fade, sounds like the easiest soultion would be to go west when the wind's out of the north. Save all your eastbound drivin' for those days when there's a south breeze. __________________ 67 C10 Shortbed 327 05 F150 4x4 NO APPOLOGIES 's 02 Xpress X19 02 Yamaha VMax 150 www.xpressboats.com Nothing says 'poor craftmanship' like wrinkles in your duct tape

01-06-2006, 04:22 PM	#4
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	Re: Weather stripping...I may not be the smartest person.... No doubt. I need to get busy and get my new/old seat in I got from ya. Trying to wait until I get my seat belt situation finalized. I have some black outer to replace the one white outer and generic left outer. But I still need to get replacement center pieces. I have them, just need to get them out of the cab. __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

01-06-2006, 09:06 PM	#7
Rollie396 someday it will be done! Join Date: Sep 2004 Location: Lloydminster,AB. Canada Posts: 1,620	Re: Weather stripping...I may not be the smartest person.... LOL does that ever bring up memories of driving my 66 in the winter.Use to shoot snow up through the hole in the floor so it was snowing in the cab half the time.I musta looked like a mobile snow globe! __________________ '72 C-10 Proud owner of a million new and used pieces that used to be and will once again be(god willing) a testament to the term "they don't build em like that anymore. '80 LWB 2wd beater '67 GMC long fleet (cab donor) '66 long step (parked till it's turn comes around) '65 short step (parts truck that will donate it's bed and possibly frame to the '66) '06 Grand Prix wife's car (she hardly lets me touch it) my pics

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.