where to mount? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

incoma · 01-07-2006, 01:02 PM

I forgot to take a picture of the driver's side engine compartment before disassembly, and now I need to mount my wiring harness back on the fender. Does it mount to the engine compartment side of the fender or does it mount up inside the fender between the fender and inner fender?

I'd also like to ask the same question about the windshield washer fluid hose. Inside or outside of the fender?

Americanrider · 01-07-2006, 01:13 PM

Mine was routed out of the firewall plug then between the fender & inner fender.

**Palf70Step** · 01-07-2006, 01:42 PM

Mine comes out of the plug, then runs between the inner and outer fender to the radiator support.

incoma · 01-07-2006, 01:44 PM

OK. That's 2 votes. I'll go with that.

Is that the same for the wiring and washer hose?

**Palf70Step** · 01-07-2006, 01:47 PM

My washer hose was in pieces, so I am not sure where it ran, but I would assume the same way to make it neat looking.

01-07-2006, 01:02 PM	#1
incoma Registered User Join Date: Mar 2004 Location: Lexington, KY Posts: 865	where to mount? I forgot to take a picture of the driver's side engine compartment before disassembly, and now I need to mount my wiring harness back on the fender. Does it mount to the engine compartment side of the fender or does it mount up inside the fender between the fender and inner fender? I'd also like to ask the same question about the windshield washer fluid hose. Inside or outside of the fender?

01-07-2006, 01:13 PM	#2
Americanrider Registered User Join Date: Dec 2004 Location: NW, WA. Posts: 1,421	Re: where to mount? Mine was routed out of the firewall plug then between the fender & inner fender.

01-07-2006, 01:42 PM	#3
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Re: where to mount? Mine comes out of the plug, then runs between the inner and outer fender to the radiator support. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

01-07-2006, 01:44 PM	#4
incoma Registered User Join Date: Mar 2004 Location: Lexington, KY Posts: 865	Re: where to mount? OK. That's 2 votes. I'll go with that. Is that the same for the wiring and washer hose?

01-07-2006, 01:47 PM	#5
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Re: where to mount? My washer hose was in pieces, so I am not sure where it ran, but I would assume the same way to make it neat looking. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.