![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Senior Member
Join Date: Aug 2003
Location: Sugar Land, TX
Posts: 1,007
|
what's the right way to adjust rear brakes??
Ok, I'm having a rear brake problem... I had one side adjusted too tight and had the truck start vibrating bad as I went down the road and had to turn around and go home. Luckily, I have another car to take. Then, I fixed the adjustment. So then, I take it again, and I had the other side too tight (I didn't adjust it b/c I thought it was ok...).
So... what is the right way to adjust the rear drums?? I'm obviously making them too tight... |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Apr 2005
Location: clarksville
Posts: 1
|
Re: what's the right way to adjust rear brakes??
what i always do is adjust them to where the drum goes on really easy, then remove the drum and adjust them until the drum has a slight drag, also check and see if the brakes are in the right spot as in long shoe and short shoe, if you reverse them it wont be adjusting right
|
![]() |
![]() |
![]() |
#3 |
Professional Grade
Join Date: May 2003
Location: Fort McMurray, Alberta
Posts: 7,915
|
Re: what's the right way to adjust rear brakes??
When I set mine, I usually have them set so the rear drum will freewheel without any drag from the shoes, then slowly advance the star wheel one click at a time until the shoes just start to grab the drum. I then give it another 2 - 3 clicks so the drum still spins freely, but has a definitely drag from the pads.
I then take the truck, and drive in reverse and stomp on the brakes once or twice. That gets the drums to auto adjust properly, and you'll be good to go after that. Drums only adjust themselves when you are in reverse and touching the brake ![]()
__________________
1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap) |
![]() |
![]() |
![]() |
#4 | |
www.73-87chevytrucks.com
![]() Join Date: Dec 1999
Location: Birmingham, AL
Posts: 6,935
|
Re: what's the right way to adjust rear brakes??
Quote:
__________________
Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com |
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: May 2003
Location: Shreveport LA
Posts: 3,170
|
Re: what's the right way to adjust rear brakes??
I adjust mine tighter & tighter until I can't turn the drum by hand, then back off the adjuster 3 to 6 notches, depending on the size of the notches.
|
![]() |
![]() |
![]() |
#6 |
What Hump?
Join Date: Apr 2003
Location: New River AZ
Posts: 2,009
|
Re: what's the right way to adjust rear brakes??
If your getting a vibration from adjusting to tight you may want to consider having the drums turned, that may eliminate the vibration.
__________________
Lil red 86 c-10 99 Sub 78 Camper Special w/ 454 |
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: Aug 2003
Location: Sugar Land, TX
Posts: 1,007
|
Re: what's the right way to adjust rear brakes??
yeah, I actually had them turned about a year ago when I completely redid the brakes (all new springs, etc.). But the vibration now is from them heating up.. it only happened on the right side after 4 miles and on the left side (after I fixed the right) after about 10 miles....
|
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Nov 2005
Location: Palmer Lake, CO
Posts: 1
|
Re: what's the right way to adjust rear brakes??
The rears on my 85 Suburban won't adjust by themselves by backing up and hitting the brakes and when I adust them they also don't stay adjusted for long either. Is this just a matter of replacing the adjusters?
Last edited by Tangmere; 01-12-2006 at 09:28 PM. |
![]() |
![]() |
![]() |
#9 |
Senior Member
Join Date: Aug 2003
Location: Sugar Land, TX
Posts: 1,007
|
Re: what's the right way to adjust rear brakes??
Well, I replaced everything... it comes as 2 parts... the springs, etc. and then the adjuster pieces. I replaced everything and it still won't auto-adjust for me. The only thing that may be my problem is that I used grease in the adjusters instead of anti-seize.
Has anybody had the adjusters not work, rebuilt them, and then had them work??? |
![]() |
![]() |
![]() |
#10 |
Right turn Clyde
Join Date: Nov 2002
Location: Cincinnati, Ohio
Posts: 2,911
|
Re: what's the right way to adjust rear brakes??
Mine don't auto adjust I don't ever think they have. I just have to adjust them manually from time to time.
Anyone know what makes the automatic adjusters work or function?
__________________
1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI |
![]() |
![]() |
![]() |
#11 | |
Account Suspended
Join Date: Nov 2005
Location: ILLINOIS
Posts: 145
|
Re: what's the right way to adjust rear brakes??
Quote:
|
|
![]() |
![]() |
![]() |
#12 |
Right turn Clyde
Join Date: Nov 2002
Location: Cincinnati, Ohio
Posts: 2,911
|
Re: what's the right way to adjust rear brakes??
Yeah you are right I think the emergence brake cable help the adjusters to work. I guess there is a pretty big problem gm has had with the adjusters work along with the emergence brake cable setup. I couldn't say either way with mine seemed that I didn't have to adjust them as much when the e-brake cables where hooked up. But I never used the e-brake at all and the foot lever in the cab never would sit up by itself. So I tied it up so it would hang there and drop. It would come all the way up but it you went over the slightest bump or looked at it wrong it would start falling down.
Then the 10 bolt rear blew up and I replaced it, never did hook the e-brake cables back up in the new 10 bolt. I need to replace something with the foot lever and the main rear cables that hook to the brakes. I know I'm missing one of the square e-brake springs that hold the e-brake bar in the center of the backing plate right under the wheel cylinder. I have good brakes but they always feel best right after I adjust the rear. From the then on it very slowly gets weaker where its almost not noticeable until they get adjusted again.
__________________
1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI |
![]() |
![]() |
![]() |
#13 |
Right turn Clyde
Join Date: Nov 2002
Location: Cincinnati, Ohio
Posts: 2,911
|
Re: what's the right way to adjust rear brakes??
I do remember one time now that the passenger rear side did work. It was bad because it would adjust it too tight and would keep it up. One time it locked that tire up. That was fun trying to beat the hub off that time to loosen them back up. That was when the e-brake cables were hooked up on the original rear end. Since then its never done it again and everything is new, all hardware / springs / shoes / wheel cylinders / hard line from the proportional valve to the rear rubber brake hose.
Everytime I leave my house 90% of the time I have to back up and use the brake. So if they did work wouldnt that over adjust them?
__________________
1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI Last edited by MylilBowTie; 01-13-2006 at 09:53 AM. |
![]() |
![]() |
![]() |
#14 |
Senior Member
Join Date: Aug 2003
Location: Sugar Land, TX
Posts: 1,007
|
Re: what's the right way to adjust rear brakes??
they can't be over adjusted by backing up.
this is a great view of how drum brakes and the adjusters work: http://auto.howstuffworks.com/drum-brake2.htm |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|