quick ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

wibilly · 01-10-2006, 05:33 AM

i'm stripping my my dash and cab for painting i'm trying to remove the ignition switch while holding the switch i'm unscrewing the bezel it got looser but is just not going any further am i missing somthing here?

67chevytrk · 01-10-2006, 05:40 AM

on my 67 I have to take out the tumbler to take off the bezel, to do that is insert the key and turn it counterclockwise (accessory) and insert a small piece of wire in the very small hole next to the key and pull the tumbler out. I don't know what year your truck is, they vary the newer they get.

hope this helps

Longhorn Man · 01-10-2006, 06:23 AM

All the 67 - 72s were like that... except, I've never heard of a 67 with an acc position.... heck, most of the 68's I've seen don't have it either.

67chevytrk · 01-12-2006, 08:09 PM

Quote:

Originally Posted by Longhorn Man

All the 67 - 72s were like that... except, I've never heard of a 67 with an acc position.... heck, most of the 68's I've seen don't have it either.

When I turn mine to accessory the fan motor for the heat/ac works, I don't have my radio hooked up, you couldn't hear it over the engine so it didn't do much good....

wibilly · 01-10-2006, 11:35 AM

thanks i thought there must be a little trick to it

wibilly · 01-10-2006, 07:15 PM

been trying to get that tumbeler out. not having any luck key in acc posistion wire in small hole feel spring tension on wire but no luck

**john** · 01-10-2006, 07:21 PM

Okay when you feel the spring tension turn a little more to the acc position and pull. It should come out. John

eric67m · 01-11-2006, 12:08 AM

My 67 has an accessory position to the left of off. All it does is slightly turn on the red generator light and drain the battery. My only accessory would be the fan and radio and they do not work in this position.

Is a dead battery considered an accessory?

northcountry67 · 01-11-2006, 12:11 AM

I didn't have the key for my 67, so I just held the back with visegrips and kept turning until it broke. I needed a new one anyway.

wibilly · 01-11-2006, 12:35 AM

i finialy got it but i had to pull the wire out after turning it just past acc then she came i was ready to get a BFH or air chisel you know what they say,[if it jams force it, if it breaks it needed replacing anyways]

01-10-2006, 05:33 AM	#1
wibilly Senior Member Join Date: Nov 2005 Location: northwestern wi Posts: 2,111	quick ? i'm stripping my my dash and cab for painting i'm trying to remove the ignition switch while holding the switch i'm unscrewing the bezel it got looser but is just not going any further am i missing somthing here? __________________ common sense isn't so common anymore

01-10-2006, 05:40 AM	#2
67chevytrk Damn I'm broke Join Date: Nov 2005 Location: Roanoke Texas Posts: 49	Re: quick ? on my 67 I have to take out the tumbler to take off the bezel, to do that is insert the key and turn it counterclockwise (accessory) and insert a small piece of wire in the very small hole next to the key and pull the tumbler out. I don't know what year your truck is, they vary the newer they get. hope this helps __________________ [B]67 Chevy truck stepside small back window 96 Dodge Indyram 74 Dart Sport 96 Neon

01-10-2006, 06:23 AM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: quick ? All the 67 - 72s were like that... except, I've never heard of a 67 with an acc position.... heck, most of the 68's I've seen don't have it either.

01-10-2006, 11:35 AM	#5
wibilly Senior Member Join Date: Nov 2005 Location: northwestern wi Posts: 2,111	Re: quick ? thanks i thought there must be a little trick to it __________________ common sense isn't so common anymore

01-10-2006, 07:15 PM	#6
wibilly Senior Member Join Date: Nov 2005 Location: northwestern wi Posts: 2,111	Re: quick ? been trying to get that tumbeler out. not having any luck key in acc posistion wire in small hole feel spring tension on wire but no luck __________________ common sense isn't so common anymore

01-10-2006, 07:21 PM	#7
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	Re: quick ? Okay when you feel the spring tension turn a little more to the acc position and pull. It should come out. John __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/

01-11-2006, 12:08 AM	#8
eric67m Registered User Join Date: Apr 2005 Location: Monroe, WA Posts: 298	Re: quick ? My 67 has an accessory position to the left of off. All it does is slightly turn on the red generator light and drain the battery. My only accessory would be the fan and radio and they do not work in this position. Is a dead battery considered an accessory?

01-11-2006, 12:11 AM	#9
northcountry67 Registered User Join Date: Dec 2005 Location: Lengby, Minnesota Posts: 225	Re: quick ? I didn't have the key for my 67, so I just held the back with visegrips and kept turning until it broke. I needed a new one anyway.

01-11-2006, 12:35 AM	#10
wibilly Senior Member Join Date: Nov 2005 Location: northwestern wi Posts: 2,111	Re: quick ? i finialy got it but i had to pull the wire out after turning it just past acc then she came i was ready to get a BFH or air chisel you know what they say,[if it jams force it, if it breaks it needed replacing anyways] __________________ common sense isn't so common anymore

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.