![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
North Coast, baby!
Join Date: Jun 2004
Location: Toledo, OH
Posts: 437
|
vacuum line connectors?
Does anyone know where one might find replacement connectors that go on the end of multiple vacuum lines to a vacuum switch and to the purge canisters? I have a serious dry rot problem with a few of mine.
One other thing. What is the correct placement of the vacuum lines for the air cleaner assembly? Does the line from the carb go on the fitting closest to the inside or the outside of the air cleaner? Thanks.
__________________
Brad 79 Scottsdale C20 ![]() 350/350 3.73's Still running full CA smog gear! ![]() Last edited by TrainD5115; 01-12-2006 at 10:51 AM. |
![]() |
![]() |
![]() |
#2 |
STILL PLAYS WITH TRUX
Join Date: Nov 2002
Location: Melbourne, Fla.
Posts: 2,764
|
![]()
You can get some from the junk yard or the auto parts store has the help line products just take the one fitting you need with you to match it up if they dont have it in stock they can look it up in the book and order it for you.
www.autozone.com go to repair info for the vaccum line diagrams to see the correct line routing. Good luck. |
![]() |
![]() |
![]() |
#3 |
North Coast, baby!
Join Date: Jun 2004
Location: Toledo, OH
Posts: 437
|
Re: vacuum line connectors?
I was at Autozone the other day and they didn't say they had anythng like that. I don't need a diagram, the original plumbing is there, some of it is just in bad shape because it is 27 years old.
__________________
Brad 79 Scottsdale C20 ![]() 350/350 3.73's Still running full CA smog gear! ![]() |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|