|
02-18-2006, 03:24 AM | #1 |
Registered User
Join Date: Nov 2005
Location: Austin, Texas
Posts: 35
|
Bogg down...why?
So ive replaced my HEI cap and rotor assmbly, about to replace the spark plugs...Problem is, when i floor it, my truck tends to bogg down-(stop accellerating) at around 2 to 4 grand rpm....Ive got a 350, 750 cfm carb. I dont know if this is a timing issue, or a carb issue..if its either, does anyone know who can help me time my truck/ and or tune my carb....I live in Austin Texas...can you help? or know someone that i can take it to? Thanx alot.
-Mark Taylor-
__________________
1970 Chevy C/10 |
02-18-2006, 09:02 AM | #2 |
Registered User
Join Date: Feb 2004
Location: WHITEVILLE N.C.
Posts: 494
|
Re: Bogg down...why?
#1 is your timing set per spec? #2 is your vacuum advance working? Sounds like you have a timing - firing issue.
__________________
72 CHEYENNE 10 SUPER 468/400/3.73 |
02-18-2006, 09:09 AM | #3 |
Senior Member
Join Date: Sep 2005
Location: Lewisville, Nc
Posts: 10,237
|
Re: Bogg down...why?
i dont know if you carb has it but sounds like an accletor pump on the carb gone bad happened on my buddys honda
__________________
David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube |
02-18-2006, 09:18 AM | #4 |
State of Confusion!
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 47,216
|
Re: Bogg down...why?
I'm suspecting carb issues myself. Like truck dude said maybe an accelerator pump or I am also thing a 750 cfm carb is a lot of carb for a stock 350 (I assume, since you didn't mention other mods). You may need to rebuild and rejet that carb so it doesn't wash out the engine.
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
02-18-2006, 10:02 AM | #5 |
Old Skool Club
Join Date: Jun 2001
Location: Benton, AR "The Heart of Arkansas"
Posts: 10,880
|
Re: Bogg down...why?
Definitely check/replace the accelerator pump, but check the vacuum advance, too. It may be just fine, but it's difficult to look at it and see what it's doing.
Back in the day, we'd hook 'em up to a Sun diagnostic machine and check all kinds of stuff like cylinder balance, timing, etc. But, I suspect the accelerator pump is the prime suspect although it should also be apparent on initial take off. If the pump is bad, it's bad all of the time, not just at higher RPM's. Do you ever just pat the gas pedal to get it to take off from a stop? If so, then it becomes more of a suspect. Also, check the choke pull-off, just to be sure it is working. Does the bog happen more after it has warmed up? If so, the pull-off could be bad. Make sure the choke is properly adjusted. One more possibility: I once had a coil-to-distributor wire that would break down on hard acceleration.....had the same effect as turning off the key. A new set of wires solved that one.
__________________
Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was. |
02-18-2006, 11:16 AM | #6 | |||
Union Electrician
Join Date: Feb 2005
Location: Louisville, Ky.
Posts: 3,354
|
Re: Bogg down...why?
I Agree with chevloray on the last issue, I had a bad wire from the HEI pickup coil and would cut off like turningon/off will under hard acceleration. Wire was shorting out when the dizzy was advancing...
__________________
69 Custom-10 SWB FLEETSIDE 350/350 TH Dropped 3.5/5.5" Help support the board->HERE Board vendors -> Vendors list Zip:40272 Big Sandy Survivor... Quote:
Quote:
Quote:
|
|||
02-18-2006, 11:57 AM | #7 |
Senior Member
Join Date: Jan 2005
Location: SUNNY WARM BIKE RIDING COTTONWOOD ARIZONA
Posts: 2,097
|
Re: Bogg down...why?
i think carb myself but we dont have enough info on the motor itself , built ??? stock ???
|
02-18-2006, 12:21 PM | #8 |
DONT TRY THIS AT HOME!
Join Date: Mar 2005
Location: East Tennessee
Posts: 119
|
Re: Bogg down...why?
uh,
is your carb a quadrabog? |
02-18-2006, 01:11 PM | #9 |
Registered User
Join Date: Nov 2005
Location: Austin, Texas
Posts: 35
|
Re: Bogg down...why?
This bogging down ONLY happens when the engine is under full throttle accelleration....its been rebuilt, bigger heads but no competition cam or intake...4 bl edelbrock 750 cfm carb.....keep it coming thanx
__________________
1970 Chevy C/10 |
02-18-2006, 01:30 PM | #10 |
Registered User
Join Date: Nov 2005
Location: Austin, Texas
Posts: 35
|
Re: Bogg down...why?
Does anyone have a 650cfm carb for sale??
__________________
1970 Chevy C/10 |
02-18-2006, 01:40 PM | #11 |
too many toys
Join Date: Oct 2004
Location: winnipeg sorta
Posts: 63
|
Re: Bogg down...why?
It could also very well be that the fuel cap is not vented. It does happen creating low pressure.
__________________
if we were all fatter we'd be closer together 1971 gmc 3/4 4x4 383 stroked 1968 1/2 2nd owner 4bbl 6cyl 1969 gmc 3/4 4 sale 350 4bbl 4spd 1969 chev 1/2 lowered 5 spd 454 4bbl 1947 chev coupe 2002 harley flhtcui 6 -67-72 my parts |
02-18-2006, 02:23 PM | #12 |
Active Member
Join Date: Jan 2006
Location: Lower Mid-East Ca.
Posts: 326
|
Re: Bogg down...why?
It'll run fine slow, but dies out under full load acceleration?
Sounds to me like it's starving for fuel, either from a half plugged filter or a piece of trash in the secondary jet; the front 2 barrels carry it fine, the secondarys open up letting all that extra air in with no fuel to go with it.
__________________
Never try to teach a pig to sing; it wastes your time and annoys the pig! Gets More Chicks My lugnuts require more torque than your honda makes! 68 GMC, 4X4 conversion w/73 k20 running gear and springs, 350 4spd, 4.10's, D44 powerlok front, 14BFF govlock rear, 33" tires, lifted 4". |
02-18-2006, 03:19 PM | #13 |
Registered User
Join Date: Nov 2005
Location: Austin, Texas
Posts: 35
|
Re: Bogg down...why?
Holy ****, my gas cap SEALS doesnt vent for ****. so when u take it off allll this pressure bursts out. That makes soo much sense....ill try a new cap and get back to yall. thanx lots...
__________________
1970 Chevy C/10 |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|